SIIG AC-PW1R11-S1 10-Port USB-A C and Wireless Charging Station User Guide
- June 4, 2024
- SIIG
Table of Contents
10-port USB-A/C &Wireless
Charging Station—150W
Quick Start Guide
04-1388A
P/N: AC-PW1R11-S1
Package contents
- 10-Port USB-AC & Wireless Charging Station
- Power Adapter 19V/7.8A
- Quick Start Guide
Layout
- Ambient light: Green: Wireless charging power on or charging finished. Blue: charging None: Standby
- Wireless charging area: For smartphone wireless charging 5V/1A 5W (Max)
- Open slot: Holds and organizes tablets, smartphones, and other USB-powered devices while charging
- Wireless Switch: Turn on/off the wireless charging function
- DC in: Connects to the included power adapter
- USB Charging Port A (x6): DC 5V/2.4A (Max)
- USB Charging Port C (x4): DC 5V/9V/12V 18W (Max)
Notice
- Charging station power output 150W (Max)
- Always Unplug the Charging Station from the power source when not in use
- DO NOT place the Charging Station on the heated surface or next to other heat sources
- DO NOT attempt to replace any parts or open the case of the Charging Station, opening the case can cause personal injury due to electrical hazards and will void the manufacturer’s warranty
- DO NOT expose the Charging Station to liquids or excessive heat
- DO NOT use corrosive cleaning substances on the Charging Station
- Keep out of the reach of children
- For optimal charging speed, we recommend using your device’s original equipment USB charging cable.
Support
For more info or tech support
http://www.siig.com/support
Apr 2022 Copyright © 2022 by SIIG, Inc. All rights reserved.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>