KINWELL UCM3051-70 Frameless Round LED Light Bathroom Vanity Mirror Instruction Manual
- June 5, 2024
- KINWELL
Table of Contents
KINWELL UCM3051-70 Frameless Round LED Light Bathroom Vanity Mirror
This is a high-quality product and must be installed and maintained as per these instructions or it may invalidate the Warranty. To installer: Please leave this manual with the user/householder when finished.
WARNING:
When using electrical appliances, comply with basic safety precautions in
order to reduce the risk of fire, electric shocks, and personal injury.
GENERAL INSTRUCTIONS
No one, and In particular no child, must be In the vicinity of the workplace. Check that the electrical specifications of this mirror light are compatible with your installation.
WARNING:
The power supply must be switched off before installation or maintenance.
Remove The fuse or de-activate it, and make sure that it cannot be
reactivated. The mirror light must be installed by a qualified electrician in
accordance with the wiring standards in force in the country where the
installation takes place.
This electrical product complies with the safety standards in force. Repairs must only be carried out by qualified technicians using original spare parts. Any failure to follow these instructions can be particularly dangerous to users and will invalidate the Warranty.
Installation Instructions
- Fix the screw(s) on the wall where the mirror is to be placed. Screw fastenings should be made in concrete or other solid structure, or in structures that have been tested and approved for fastenings. Before drilling a hole, make sure that there is no risk of drilling through an existing non-visible cable or pipe; and make sure that the hole position for the expansion screw fits the mirror and the hanging direction.
- Isolate the power supply by means of the electrical system main switch.
- Connect the electricity supply to the mains cable ( V-), making sure that the conductors match (mains brown and neutral blue).
- Carefully attach the mirror to the wall, making sure the mirror hanging properly and level.
- Restore the power supply.
- Switch on the mirror light. Your mirror light is now ready to work.
- Short Touch – ON/OFF
- Long Touch – Dimming
- The demister starts working when switching on the mirror light.
Cleaning and Maintenance
Clean regularly and wipe off excess moisture by using a dry cloth only. Installation and maintenance must only be carried out by a Qualified Electrician.
HOW TO USE?
For the LED Light:
- Press on the touch switch for a short time to control the light on or off. (Note: The defogging is turned on or off with mirror light)
- After the light is turned on, press the touch switch for a long time to adjust the brightness of the light.
- Stop whenever you think the brightness is OK for you.
For Bluetooth Music：
- Turn on the power.
- Open your phone Bluetooth search for ‘mirror multimedia’, select and connection.
- Then you can play any music on your phone/pad.
NOTE:
Bluetooth is connectable to one device only. If you want to connect the second
device, please forget the first device.
PARAMETERS
HOW TO REPLACE?
Every part is dismountable, we will send you a new one if it is unworkable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>