KINWELL GLD3017-2060 59 Inch Modern Rectangular Frameless Glass Decorative Mirror Instruction Manual

KINWELL GLD3017-2060 59 Inch Modern Rectangular Frameless Glass

Decorative Mirror

INSTRUCTION

Please read all instructions before using this mirror.

DANGER: To reduce the risk of electric shock. Always unplug this mirror from the electrical outlet before cleaning.

WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons:

1.  Disconnect from outlet before putting on or taking off parts.
2.  Close supervision is necessary when this mirror is used by, or near children.
3.  Keep the cord away from heated surfaces.
4.  Make sure that the electricity is turned off at the power source before proceeding with the installation.
5.  Always unplug all the power supply cords from before moving the product, testing the product, or repairing the product.
6.  Do not use outdoors.

SAFETY INFORMATION

1.  Handle the glass with caution! Improperly handling the glass can cause it to break.
2.  You will need at least two people to install this unit properly.
3.  Seller is not responsible for any damage to the unit or personal property caused by improper installation.
4.  Install the product on a leveled surface.

MAINTENANCE:

• For daily maintenance, use a wet cloth and a soft liquid cleaner.
• Never use abrasive cleaners or strong bleach, scrapers, metallic brushes, or other objects or any products which can graze or tarnish surfaces.

FULL-LENGTH MIRROR

HARDWARE

TOOLS REQUIRED

INSTALLATION GUIDELINES

Option #1

1. Pick up your hands from both sides of the mirror, find a suitable angle, and lean the mirror against the wall.
2. Connect the power supply (110V~).
3. Swipe the sensor switch to turn on the light. Your mirror is now ready to work.

Option #2

1. Measure the distance between the center points of the cross holes on the back of the mirror. Use the ruler and pencil to locate and mark on the wall.
2. Use an electric drill to make holes at the mark.
3. Knock the expansion screws into the holes. Then knock the screws into the expansion screws and leave a suitable length for hanging the mirror.
4. Turn off the power and then connect the electricity supply to the mains cable (110V~).
5. Insert a piece of screws left outside the wall into the cross holes on the back of the mirror. Carefully attach the mirror to the wall, making sure the mirror hanging properly and level.
6. Restore the power supply

HOW TO USE

1. Place your hand about 5cm in front of the sensor switch and swipe to control the light on and off.
2. Turn on and off the light in short time to control the color of the light.
3. Put your hand in front of the sensor switch for a long time to adjust the brightness of the light.

PARAMETERS

The mirror is fragile goods. If there is any problem of the mirror when you receive it, please feel free to contact us via Amazon/eBay message. We will provide you with a satisfactory solution. Thanks for your trust and support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>