ring 5B21S8-BEN0 Floodlight Battery Smart Lighting Instruction Manual
- June 5, 2024
- Ring
Table of Contents
ring 5B21S8-BEN0 Floodlight Battery Smart
Lighting
Set up your Floodlight
Download the Ring app.
The app walks you through setting up and managing your Ring Floodlight
Battery. Search for “Ring” in one of these app stores, or visit: ring.com/app
Set up your Ring Bridge
The Bridge connects your Ring Smart Lights to the Ring app To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual. and other compatible Ring devices.
Remove the back cover
Twist your Floodlight counter-clockwise to unlock and separate it from the
back cover.
Remove the battery lid
Press the side buttons on the battery lid to remove it and open the battery
compartment.
Insert the batteries
Insert four D Cell batteries (not included), matching the flat ends with
the springs. Then place the lid onto the compartment and push down to snap it
into place.
Set up your Floodlight Battery in the Ring app
In the app, tap Set Up a Device. When prompted, select SmartLights and
follow the in-app instructions. After setup, replace the back cover (be sure
to line up the arrows).
Install your Floodlight
Remove the mounting plate
Press the tab on the side and slide the mounting plate off of the back
cover.
Mark pilot holes
If installing on a masonry surface, use the mounting plate as a template to
mark pilot holes, making sure the “UP” arrow is pointing upwards. Then drill
the holes and insert the anchors.
Drive the screws
Hold the mounting plate firmly against the surface and drive the three
mounting screws.
Mount your Floodlight
Align your Floodlight with the mounting plate and slide it to the left to
lock it in.
The motion sensor is adjustable. Try various angles to find the best setting for your home.For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085
For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents 2019 Ring LLC or its affiliates. Ring, Alexa, Always Home, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.Last updated: 01/08/19 Models: Ring Motion Sensor (5SM1S8), Ring Spotlight (5B11S8), Ring Steplight (5LD1S8), Ring Pathlight (5LP1Y8), Ring Floodlight Battery (5B21S8), Ring Floodlight Wired (5W21S8), Ring Transformer (5AT1S9) Canada
CAN ICES-3 (B)/NMB-3(B)
Innovation, Science and Economic Development Canada (ISED) Compliance. This
device contains license-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions: his device may not cause
interference, and this device must accept any interference, including
interference that may cause undesired operation of the device.
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment. Information
Regarding Exposure to Radio Frequency Energy: This equipment complies with IC
RSS-102 RF exposure limits set forth for an uncontrolled
environment.Information concerning the environment.
MPE Reminding
This equipment should be installed and operated with a minimum distance 20
cm between the radiator and your body.
United States
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: this device may not cause harmful interference,
and this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. Information on this device is on
file with the FCC and can be found by inputting the device’s FCC ID into the
FCC ID Search form available at https://www.fcc.gov/oet/ea/fccid. The output
power of the radio technology used in the Products is below the radio
frequency exposure limits set by the FCC. Nevertheless, it is advised to use
the Products in such a manner that minimizes the potential for human contact
during normal operation.
General
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
-
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
Electrical ratings: -
Motion Sensor: 3 x AAA-cell batteries
-
Spotlight: 4 x
-
D-cell batteries Steplight:
-
3 x C-cell batteries Pathlight:
-
4 x D-cell batteries
This device may require batteries for use. Only use the specified battery types. Never mix old and new batteries. Install batteries with correct polarity. Do not mix Alkaline, Standard Carbon Zinc, Rechargeable Nickel Cadmium or Nickel Metal Hydride batteries. Keep all of the batteries out of the reach of children. Do not open, disassemble, puncture, cut, bend, shred or heat the batteries. Remove all batteries if they are worn out or before storing your device for an extended period of time. Dispose of all batteries in accordance with applicable laws and regulations and do not dispose of batteries by throwing them into a fire. If any batteries begin to leak, take steps to prevent the fluid from coming into direct contact with skin or clothes as the fluid could be corrosive and may be toxic. Remove the batteries and clean the battery compartment in accordance with the battery manufacturer’s recommendations.
Operating conditions
- Floodlight Battery: -4°F to 122°F (-20°C to 50°C)
- Floodlight Wired: -4°F to 118°F (-20°C to 48°C)
- Motion Sensor: -4°F to 122°F (-20°C to 50°C)
- Pathlight: -4°F to 122°F (-20°C to 50°C)
- Spotlight: -4°F to 122°F (-20°C to 50°C)
- Steplight: -4°F to 122°F (-20°C to 50°C)
- Transformer: -4°F to 122°F (-20°C to 50°C)
Small parts may pose choking hazards. Keep device and box contents out of reach of children. To review your warranty coverage, please visit www.ring.com/warranty Patents: www.ring.com/patents
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>