DIGIKUBER DK E80 Smare ECG Temperature Watch User Guide
- June 5, 2024
- DIGIKUBER
Table of Contents
DIGIKUBER DK E80 Smare ECG Temperature Watch
Parts introduction
Long press the side button to turn on the watch
Instruction for Charging
It needs to be charged and activated before using the watch for the first time. Use the equipped magnetic charging cable to attach to your hand The metal point on the back of the watch, the other end of the charging cable Connect to the USB charging head or computer USB connection Just mouth.
Install watch APP
Scan the QR code or enter the major application markets Download and install
“SmartHealth”.
Device requirements: i0S 9.0 and above; Android 4.4 and above, Bluetooth 4.0
is supported.
Main function interface
Main interface/dial
On the main interface, long-press the touch screen, or in the APP menu, click
“theme selection” to enter Switch the main interface/dial. The dial has 7
styles.
On the main interface, press the side button or swipe up to enter the function page, and then press the side button or Swipe down to return to the main interface.
Pedometer/Distance/Calories
View steps, distance, and calories burned in real-time It can synchronize apps
in time to view motion data.
Body temperature
Switch to the temperature test interface to enter the real-time temperature detection, the monitoring data can be updated to the APP synchronously, and there is a test report.
Note:
When testing body temperature, the bottom temperature must be in full contact
with the skin (tested after 10 minutes of wearing). The body temperature test
will be affected by the temperature difference of the environment, which only
serves as a warning reminder. For details, please refer to medical
professional equipment and doctor diagnosis.
Heart rate monitoring
Switch to the heart rate monitor interface, Heart rate monitoring, in real-
time The measurement data can be synchronized with the APP in real-time with a
test report.
ECG
Long press the front of the electrode on the ECG test interface, the three
electrodes are in full contact Skin, test, test report needs to be viewed in
APP.
Blood pressure monitoring
Switch to the blood pressure monitor interface, to enter real-time monitoring.
The measurement data can be synchronized with the APP in real time with a test
report.
Note:
When measuring blood pressure, please measure by the correct posture. The test
result is for reference only, Cannot be used as medical data.
Blood oxygen interface
Switch to the blood oxygen test interface to enter the blood oxygen real-time
detection and measurement data It can be updated to the APP synchronously, and
there is a test report.
Respiration rate interface
Switch to the respiratory rate test interface to enter real-time detection and
monitoring of respiratory rate The data can be updated to the APP
synchronously, and there is a test report.
Sport mode
Click on the sports mode interface to enter the sports mode. There are
multiple sports modes to choose from. Click the exercise icon to enter the
corresponding exercise mode detection. Swipe up and down to switch sports
Mode, click to start the calculation, and swipe right to exit the current
sports mode.
Weather information
The weather page displays Current weather, air quality information, and
tomorrow’s Condition. Weather information needs to be connected to the client
before data can be obtained if you disconnect for a long time, the weather
information will not be updated.
Note:
Phone settings need to be turned on for positioning.
Sleep monitoring function
When you fall asleep, your watch automatically determines that you’re in sleep detection mode, automatically detects how long you’ve been asleep/light sleeping/sleeping all night, calculates the quality of your sleep, and updates your sleep data to the APP synchronously.
Note:
Wear your watch to sleep before you have sleep data.
Stopwatch
Tap the stopwatch to enter the stopwatch function, and swipe right to exit.
music
When connected, tap music to control the music player.
camera
In the connected state, tap the camera to remotely take pictures with the
mobile phone. Click to take a photo and swipe right to exit.
Shortcut function
Swipe down on the main interface to enter the shortcut function interface,
select “SOS” “Information” “About” ‘Settings” and other options, click the
icon to You can enter the corresponding function. “SOS needs to be used when
the watch is connected to the phone.
Information
Click on the message to view the content of the message, Scroll up and down to
turn pages. Swipe right to exit.
About
Click the about icon to display the machine model and last four digits of the
Bluetooth address.
brightness
Click the brightness icon to freely select the screen brightness.
Raise your wrist
Tap the wrist lift icon to enter, you can choose to open or close the wrist
lift.
Reset
Click the reset icon to enter, you can restore the factory settings of the
watch.
Shutdown
Click the shutdown icon to enter, you can shutdown.
Precautions
- Do not use an adapter with a current over 2A. Charging time is around 2-3 hours
- Do not charge after the device was water damaged
- This is an electronic monitoring product, data received from it cannot be used a medical basis.
- Blood pressure testing tip:
- Keep your body relaxed and still while testing.
- Keep the device at the same height as your heart, and don’t talk while you are testing
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>