CHILEAF CL837 Dual module ANT+ and Bluetooth Heart Rate Monitor User Manual

ANT+ & Bluetooth Heart rate monitor
User manual
Model: CL837

Introduction

Thank you for purchasing the CL837 heart rate monitor. This device monitors and transmits real-time heart rate, blood oxygen, step count and calorie data via Bluetooth or ANT+ to the fitness application on your device. The CL837 is designed to help you manage your intensity exercises. We recommend that you read this user manual before using i preserving it for the future. Reminder Please fully charge the device before first use. This device is not intended for medical use and is intended for use only down training fitness i classes recreational activities. Consult with doctor expert or doctor family, To to establish right heart rate range For Yours body.

Main features:

• Monitoring your heart rate, blood oxygen (SPO2) and step count
  • Bluetooth Low Energy 5.0

• No buttons, automatic on/off

• Built-in acceleration sensor

• Rechargeable lithium battery

• Stores 2 days of heart rate data and 7 days of fitness data.

• Vibration reminder

• LED indicator

Compatible Apps: X-fitness, Wahoo, Zwift, Runtastic Pro, Nike Run Club

Contents of the package

1. Heart rate monitor with armband
2. Charging cable
3. English user manual

Landing
To charge your device, connect the cable to the USB charger and then connect the device. Low battery (20%): Red LED flashes smoothly and the motor vibrates. Charging: Red and green LED flash alternately Full battery: Green LED remains on

Usage
Carry the device on your shoulder. Fix the band in a comfortable position and make sure the sensor does not slip. NO tighten too tightly as the bandage may restrict blood circulation. This device has an automatic on/off function; device turns on automatically when attached to the arm and has a purple LED flashes quickly.

Connection

This device uses Bluetooth Low Energy 5.0 technology. The purple LED flashes smoothly while waiting for a Bluetooth connection. Once connected Bluetooth blue LED will flash smoothly. Initial setup with the fitness app: 1. Turn on Bluetooth on your phone. When prompted, allow all app permissions. 2. Go to the sensor settings menu in the app 3. Search for and connect your device Initial setup with Bluetooth smart devices (sports watches, fitness equipment and gym complex training system: 1. Go to your device settings menu, select “add heart rate monitor”. 2. Search for and connect your device

Data refresh interval

Note: The device vibrates three times (two groups) when the heart rate value reaches 167.
Measuring the level of oxygen in the blood Put on the device, open the “X-Fitness” application, connect the device and enter the blood oxygen (SPO2) interface, click “GO” to measure blood oxygen (SPO2). Please keep your body in a sitting position during measurement relaxed, the measurement process takes about 50 seconds.

Specification

Dimensions: length 47 x width 30 x height 11 mm
Weight: 12.1 g Battery type: rechargeable lithium battery
Battery life: up to 60 hours
Operating temperature: -10°C to 50°C /14°F to 122°F
Transmission: ANT+,
Bluetooth Waterproof level: IP67

Reservation:
The information contained in this user manual is for information purposes only reference. The product described above may be subject to modifications as part of the manufacturer’s ongoing research and development plans. Producer there is no obligation to inform in advance. We do not accept any legal responsibility for any direct or indirect, incidental, special damages, losses and expenses arising from or related to this manual or contained in product.
EU Declaration of Conformity We hereby declare that the armband with heart rate monitor (CL837) complies with the essential requirements and other relevant requirements provisions directive ED 2014/53/EU. Available Is copy signed and dated declaration compliance.
FCC Statement
This device complies with Part 15 of the FCC Rules. Action is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any received interference, including interference that may cause undesirable action.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance may invalidate the law user to operate the device.
NOTE: This device has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These restrictions are designed to provide reasonable protection against harmful uses interference in installations homework.
This device generates, uses and can radiate radio frequency energy If not installed and used according to the instructions, it may cause harmful effects interference in radio communication. However, there is no guarantee that this will not happen in a specific installation interference will occur. If this equipment causes harmful interference to reception radio or television, which can be determined by turning the device off and on, encourages the user to correct the interference by one or more of the following resources:

• Change the orientation or position of the receiving antenna.
• Increase the separation between the device and the receiver.
• Plug the device into an outlet on a circuit different from that to which it is connected receiver.
• Consult the dealer or an experienced radio/TV technician for advice getting help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>