DigiKuber E88P Smart Watch ECG User Manual
- June 16, 2024
- DIGIKUBER
Table of Contents
Watch quick instructions
Parts introduction
Long press the side button to turn on the watch
Instruction for Charging
Need to charge and activate before usig the watch for the first time. Use the equipped magnetic wireless charger to attach toThe metal ring on theback of the watch, the other charging cableConnect to US8 charging head or USB interface Can
Install watch APP
Scan the following QR code or go to major application markets to download and install DeepFit
Device requirements i0S 9.0ad above; Android 4.4 and above Bluetooth 4.0 is supported.
Main function interface
Main interface/dial
On the main interface, long press the touch screen or in the APP menu, click
“theme selection to enter Switch the main interface/dial
On the main interface. press the side button or swipe up to enter the function page, and then press the side button or Swipe down to return to the main interface.
Pedometer/Distance/Calories
View steps, distance, calories burn in real time lt can synchronize apps in
time to view motion data
Body temperature
Switch to the temperature test interface to enter the real-time temperature
detection, the monitoring data can be updated to the APP synchronously, and
there is a test report.
Note When testing body temperature, the bottom temperature must be in full contact with the skin (tested after 10 minutes of wearing) The body temperature test will be affected by the temperature difference of the environment, which only serves as a warming reminder For details, please refer to medical professional equipment and doctor diagnosis.
Heart rate monitoring
Switch to the heart rate monitor interface, eart rate monitoring. in real-time
The measurement data can De synchronized with the APP in teal time with a test
report
ECG
Long press the front electrode on the ECG test interface, the three electrodes
are in full contact Skin, test, test report needs to be viewed in APP.
Blood pressure monitoring
Switch to the blood pressure monitor interface, to enter real-time monitoring.
The measurement data can be synchronized with the A in real time with a test
report
Note : When measuring blood pressure, please measure by the oorrect
posture.The test result is for reference only, Cannot be used as medical data.
Blood oxygen Interface
Switch to the blood oxygen test interface to enter the blood oxygen real-time
detection and measurement data lt can be updated to the AP synchronously, and
there is a test report.
Weather information
The weather page displays current weather, aif quality information, and
tomorrow Condition .
Weather information needs to be connected to the client before data can be
obtained If you disconnect for a long time, the weather information wilt not
be updated
Note: Phone settings need to be turned on for positioning.
Sleep monitoring function
When you fall asleep, your watch automatically determines that you’re in sleep
detection mode, automatically detects how long you’ve been asleep/light
sleeping/sleeping all night, calculates the quality of your sleep, and updates
your sleep data to the APP synchronously.
Note: Wear your watch to sleep before you have sleep data.
Stopwatch
Tap the stopwatch to enter the stopwatch function, and swipe right to exit.
Music
When connected, tap music to control the music player.
Shortcut function
Swipe down on the main interlace enter the shortcut function interface,
select”Do not disturb Lock Screen About Settings° and other options, click the
icon toYou can enter the corresponding function.
Information
Click on the message to view the content of the message, scroll up and down to
turn pages Swipe right to exit.
About
Click the about icon to display the machine model and last four digits of the
Bluetooth address
Brightness
Click the brightness icon to freely select the screen brightness
Raise your wrist
Tap the wrist lift icon to enter, you can choose to open or close the wrist
lift
Reset
Click the reset icon to enter, you can restore the factory settings of the
watch,
Shutdown
Click the shutdown icon to enter, you can shutdown, Other feature reminders.
The reminder function needs to set the on reminder switch on the App gide and
keep the phone and watch connected successfully in Bluetooth to the message is
a vibration reminder.
Basic parameters
Connection mode: Bluetooth connection
Input: 5V,500mA MAX
Device requirements. Android 4.4or i0s9.0 and above
Caution
- Prohibit the use of an adapter with charging voltage greater than 5V, charging current greater than 2A, and charging time of 2-3 hours
- Prohibit charging in the presence of water damage.
- Do not disassemble the case of this product without permission, the product will be damaged and lose warranty eligibility
Special note
- This product is not a medical device, the measurement results are for reference only, not for any medical purposes and basis. Please follow your doctor’s instructions and do not rely on the test results for self-diagnosis and treatment
- This manual is based on existing information, in the spirit of continuous improvement, the principle of continuous development, the company reserves the right to change product specifications and functions, and any product described in this manual to modify and mprove.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>