Guangzhou Cal Boz Electrical Science Technology Z83-II Mini PC User Guide
- June 5, 2024
- Guangzhou Cal Boz Electrical Science Technology
Table of Contents
Cal Boz Electrical Science Technology Z83-II Mini PC
User Guide
Vine PC
User Operations Guide
- Basic Operation
- System Configuration
Basic Operation
Failure to use the included Power Adapter may violate regulatory compliance requirements and may expose the user to safety hazards.
Precautions for use
- In order to continue to improve the user experience, we may occasionally update the app and firmware.
- Do not use harsh chemical solvents. Cleaning products We recommend using a soft cloth to wipe
- Do not throw the Product Into the fire, avoid having a Fire accident
- Do not attempt to open the housing or to repair, if a failure occurs. please contact the customer service
- Power management: Adapter DC12V 1.5A(100-240V.50/50Hz)
- Failure to use the included Power Adapter may violate regulatory compliance requirements and may expose the user to safety hazards.
- Please note seepage while cleaning electronics, be careful of electric shock.
- Check for any frayed or damaged cords or plugs.
- Don’t arbitrary discard the product, We should protect the environment
- Work Environment:5°C — 35°C, 30%–90% Humidity
- Storage Environment:-20°C 50°0,1096-90% Humidity
Failure to use the included Power Adapter may violate regulatory compliance
requirements and may expose the user to safety hazards.
*Product appearance depends on goods
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference. and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
RF exposure warning:
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying
RFexposure compliance.
https://www.youtube.com/channel/UCpF4wkCNJjE1qarlGegXz4Q/feed