Shenzhen Smacat Electronic Technology T10 Multi-Functional Wireless Charging Station User Manual
- June 5, 2024
- Shenzhen Smacat Electronic Technology
Table of Contents
Multi-Functional Wireless Charging Station
User Manual
Please read the instructions carefully before using them.
Product Function
Installation Guide
Product Features
Charging your phone, tablet, watch, Apple Pencil, and earbuds
specification
| Name: | Multi-Functional Wireless Charging Sudan |
|---|---|
| fiaterial | ABS |
| Input: | BY/3A 5W2A 12V/1.5A |
| Output | 5W 7.5W 1071 15W |
| Site: | 170’160’106mm |
| Weight: | 285g |
LED Indicator Status
Power on| Green lights on and keeps for 3s, then turn off
On Charging| Green LED keeps on
Charging
Completed
| LED will turn off except ‘Phones
FOD/Error| Green lights flashing
Power off| Turn off
Tips
- Do not squeeze or collide.
- Do not disassemble or throw into fire or water to avoid causing a short circuit.
- Do not use wireless chargers in an extremely hot, humid, or corrosive environment.
- Do not use a near magnetic bank card or IC card to avoid malfunctioning.
- Please keep a minimum of 20cm between implantable medical devices (pacemaker, implantable cochlear. etc) to avoid potential interference with the medical device.
- Keep out of reach of children and pets. The images in this manual are sketch drawings of the actual products only, actual product might be slightly different.
- Adapter is not included, please purchase separately.
According to the 15th of the FCC Rules. This equipment has been tested and found to comply with the limits for a Class B digital device. The limiting value is set is in order to provide protection for Wireless communication equipment. Because This equipment generates produces radiation interference, it will cause harmful interference to equipment.if not installed and used in accordance with the instructions
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>