niko 353-602111 Motion Detector Instruction Manual
- June 4, 2024
- niko
Table of Contents
niko 353-602111 Motion Detector
Motion
detector M42MR, 230 V, 1 channel, 12-13 m, 360°, for surface mounting
Wiring
- Remove if you want to use the contact as a dry contact (potential-free).
- This product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.
Dimensions
Dimensions
Installation
Installation
- If a grommet needs to be replaced, please make sure the new grommet is halogen-free.
Dismantling
App settings
| | | 
---|---|---|---
Factory settings| Switch ON/OFF| 500 lux| 15 min
LED behaviour
Green LED continuous on| | Connection OK|
---|---|---|---
Green LED breathing| 
| Connection OK, overrule ON|
Green LED flashing| 
| Warming
up| Wait
Red LED continuous on| | Error|
_More info – >
_detector tool
Red LED breathing| 
|
Warning
Blue LED flashing| 
| Walk
test active
Specifications
Specifications
- Article number 353-602111
- Configuration 230 V Master
- Input voltage 230 Vac ± 10 %, 50 Hz
- Maximum power consumption 0.2 W
- Circuit breaker maximum MCB rating 16 A*
- Relay contact NO (max. μ10 A), potential-free
- Maximum load incandescent and halogen lamps (cosφ = 1) 2300 W
- Maximum load fluorescent lamps (cosφ ≥ 0.5) 1200 VA
- Maximum load economy lamps (CFLi) 350 W
- Maximum load LED lamps 230 V 350 W
- Maximum load LED driver 500 VA
- Maximum load electronic transformer 500 VA
- Maximum capacitive load 140 μF
- Maximum switching current 165 A/20 ms – 800 A/200 μs
- Light intensity range 20 – 2000 lux, ∞
- Number of channels 1 channel
- Switch-off delay pulse, 15 s – 120 min, ∞
- Hysteresis on light intensity + 10%
- Detection angle 360 °
- Detection range (PIR) Ø 12 m from a height of 3 m
- Ambient temperature -25 – +40 °C
- Mounting method surface mounting
- Mounting height 2 – 3.5 m
- Colour white (RAL 9010)
- Dimensions visible (HxWxD) 100 x 100 x 50 mm
- Dimensions (HxWxD) 100 x 100 x 50 mm
- Wire capacity 1.5/2.5 mm²
- Maximum range Bluetooth® (free field, depending on the device) 50 m
- Operating frequency 2.4 GHz
- Maximum radio frequency power -2 dBm
- Protection degree IP54
- Impact resistance IK02
- Modification of settings app (iOS/Android) and 2-way Bluetooth® communication
- Halogen-free yes
- Marking CE
- The MCB rating is limited by national installation rules.
Detection area
| H | A | B | C |
|---|---|---|---|
| Walking | Across | Towards | |
| 2.5 m | ø 13 m | ø 11 m | ø 3 m |
| 3.0 m | ø 12 m | ø 12 m | ø 3 m |
- Measured according to EN/IEC63180
Troubleshooting’
| Problem | Possible cause | Proposed solution |
|---|---|---|
| Load does not turn on | The wiring is not correct | Check the wiring |
scheme
| The ambient light is too strong| Check the response value luminosity and
raise the value if necessary
Load does not turn off| The switch-off delay is too long| Check the
switch-off delay and shorten the delay if necessary
| The detector receives false triggers| Check for any objects that may cause
false triggering and remove them from the detection range or lower the
sensitivity
App cannot connect to the detector| Bluetooth® has been disabled on
your mobile device| Enable Bluetooth® on your mobile device
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
| +32 3 778 90 80 | support@niko.eu |
|---|
Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up to date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>