urbanista 44257 MIAMI Over Ear Wireless Headphones Instruction Manual

: June 5, 2024
: urbanista

Table of Contents

urbanista 44257 MIAMI Over Ear Wireless Headphones
OVERVIEW
PAIRING MODE
CONTROL BUTTON
VOLUME & TRACK BUTTONS
FEATURE BUTTON
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

urbanista 44257 MIAMI Over Ear Wireless Headphones

URBANISTA HELP CENTER

Thanks for choosing an Urbanista product! If you have any questions which you can’t find the answer to in this manual, please visit our online help center where you will find our FAQs and an online version of this manual.
https://support.urbanista.com/

OVERVIEW

PAIRING MODE

FIRST TIME PAI RING

To connect the headphones to a Bluetooth device for the first time – Press and hold the Control button (1) for 1 sec-ond.
The headphones will automatically enter pairing mode. Open Bluetooth settings on your device and select “Urbanista Miami”. The Battery Status Indicator Light will flash
when searching for the device and stop flashing when succesfully paired. You can now enjoy your music and make phone calls using your Urbanista Miami head-phones.
If pairing is not established within 5 minutes, the head-phones will power off and the procedure must start over.

CONTROL BUTTON

POWER ON – Press and hold the Control button (1) for 1 second.
POWER OFF – Press and hold the Control button (1) for 3 seconds.
PLAY – Press the Control button (1) once.
PAUSE – Press the Control button (1) once.
ANSWER INCOMING CALL – Press the Control button (1) once.
END A CALL – Press the Control button (1) once.
REJECT A CALL – Press and hold the Control button (1) for 2 seconds.
SIRI – Press the Control button (1) twice.

VOLUME & TRACK BUTTONS

VOLUME (+) – Press the + button (2) once.
VOLUME (–) – Press the – button (2) once.
SKIP TRACK – Press and hold the + button (2) for 2 seconds.
PREVIOUS TRACK – Press and hold the – button (2) for 2 seconds.

FEATURE BUTTON

THREE STEPS

ACTIVE NOISE CANCELLING – Press the Feature button (3) once.
AMBIENT SOUND MODE – Wait two seconds and press the Feature button (3) again.
DEFAULT MODE – Press the Feature button (3) a third time to return to Default Mode.

NOTIFICATIONS

EAR DETECTION – Built-in sensors will stop the music automatically if the headphones are removed from your head. The autoplay function will kick in once you put the headphones back on your head and the music will start to play again.
LOW-BATTERY WARNING – When your battery power is running low, there will be a “Low battery” voice prompt and 30 minutes remaining playtime before the headphones turn off automatically.