AURATON AURSME4111010 Smart Gate Roller Shutter User Manual

: June 3, 2024
: AURATON

Table of Contents

Roller Shutters and gates controller
Description of the device
Connection diagram
App Instructions
Technical data
Disposing of the devices
Manufacturer
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AURATON AURSME4111010 Smart Gate Roller Shutter User Manual

Roller Shutters and gates controller

AURATON Roller Shutter is a rotary drive controller with the possibility of changing the direction and adjusting the speed lock using limit switches, adapted to control roller shutters and gates.

Installation of the device in installation boxes with a minimum depth of 60 mm.
Installation Instructions

Description of the device

Connection terminals
Signaling diode
Button for pairing / removing the device from the system

Connection diagram

(N) neutral terminal
(L) phase conductor terminal
(O↓) control terminal
(O↑) control terminal
(I↓) switch terminal
(l↑) switch terminal
device controlled
switch

App Instructions

Pairing the AURATON Roller Shutter with the AURATON Pulse

Technical data

AC supply voltage: 60-240 V AC, 50-60 Hz
Maximum power consumption: ≤1 W
Standby power consumption: ≤0,4 W
Operating temperature range: 0 – 35°C
Power cord type, maximum allowable power cord cross-section: 3 x 2,5 mm2
Weight limit: resistive: up to 4.3 A (<1 kW) inductive: up to 1.7 A
Security Type: External miniature circuit breaker with a maximum current of 10 A required
Control element: Electromagnetic relay with micro break
Control method: remotely – by radio locally – by pressing the button
Compatible with Internet getaway: AURATON Pulse
Operation range: approx. 30 m
Radio frequency: 868.150 MHz; 868.450 MHz
Radio signal strength: Up to 11 dBm
Radio receiver category: 2
Radio protocol: AURA
Security level: IP20
Dimensions [mm]: 48 x 35 x 19

Disposing of the devices

The device is marked with a symbol of a crossed waste bin. Pursuant to European Directive 2012/19/EU and to the Act on waste electrical and electronic equipment, such mark indicates that the device, at the end of its service life, must not be disposed of together with other household waste.

The user is responsible for delivering the devices to a recep- tion point for used-up electric and electronic equipment.

Hereby, LARS Andrzej Szymanski declares that the radio equipment type AURATON Roller Shutter is in compliance with Directive 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://manuals.auraton.pl

The extended manual can be found at: https://manuals.auraton.pl