vamvo MLP-110 Video Projector User Manual

vamvo -MLP-110 -Video -Projector

FIRE AND SHOCK PRECAUTIONS

1. Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up ot heat inside your projector. Allow at least 4 inches (10 cm) or space between your projector and a wall.
2. Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve any objects that might fall into your projector, Do not insert any metal objects such as a wire or screwdriver into your projector.It something should fall into your projector, disconnect it immediately and have the object removed by qualified service personnel.
3. Do not place any liquids on top of your projector.
4. Do not look into the lens while the projector is on. Serious damage to your eyes could result.
5. Keep any items such as magnifying glass out of the light pathof the proJector Ihe light being projected trom the lens is extensive therefore any kind of abnormal objects that can redirect light coming out of the lens can cause unpredictable outcome Such as fire or injury to the eyes
6. Do not cover the lens with the supplied lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap and possibly burning your hands due to the heat emitted from the light output.
7. Do not place any objects, which are easily affected by heat, in front of the projector lens or a projector exhaust vent. Doing so could lead to the object melting your s hurn ed ng O tne heat that is emitted from the light output and exidust.
8. The projector is designed to operate on a power supply of DC12V-2.5A/Micro USB. Ensure that your power supply fits this requirement before attempting to use your projector.
9. Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire.
10.  If the projector is not to be used for an extended period of time, disconnect the plug from the power outlet.
11.  Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.
12. Do not handle the power plug with wet hands.

PRODUCT FUNCTION STRUCTURE DIAGRAM

NOTE: Keep the draught and amplifier output can not be sheltered on the front 10 cm around.

PRODUCT FUNCTION STRUCTURE DIAGRAM

1. the menu button can be used as a call menu quickly any.,., here;
2. SOURCE button can be used as call input source menu quickly anywhere;
3. You mn press the “Return” button shortcut to the homepage when you use the HDMI or AV.

NOTE:

1. To avoid power shortage, please do not mixed use the old and new battery
2. To avoid battery leakage corrosion, if do not use remote control for a long time, please take the battery out.
3.  When using the remote control, please align remote control signal transmitter to the projector’s infrared signal reception window.

SCREEN MIRRORING

• Step1 : Select Screen Mirroring in the HOME screen.
• Step2 : Press t he OK key to enter the interface.
• Step2: After entering into interface, select t he funct ion you need.
• Note : To Return t o HOME screen form Screen Mirroring interface, press the “EXIT” key on the remote control.

Android Screen
Android Screen can support Wireless Connection

• Step1: Select Android Screen in the Syncscreen interfaceStep
• Step2: Turn on the WLAN of Android device, choose the Screen mirrorinq function on the Android device, search for the device name of the projector and click to connect, and waita few seconds, then the mirroring will be succesful

1. The SSID is the device name cf the proj ector.
2.  The instructions of Android Screen.

Note: Different Android devices have different positions and names for the screen mirroring function, please refer to the manual of the Android device.

1. Only suitable for home entertainment in a dark environment, NOT for presentation purposes.
2. DO NOT obstruct the air vents when using. UNPLUG& PREVENT DUST from entering when not in use.

1OS Screen
ioS Screen has three connection methods
Wireless connection without Wi-Fi router

• Step1: Projector doesn’t need to connect Wi-Fi router.
• Step2: Turn on Wi-Fi on your iOS device and search for the network name of the projector, for example: Display 3174, select it and enter the password “12345678”, then your iOS device will connect to the projector.
• Step3: Turn on Screen Mirroring on your iOS device, select Display 3174 of the projector.

1. O.Projector to WI-FI router connection indicator.
2. The device name and password of the projector.
3. The instruction of lOS Screen.
   • Note: The router WIFI needs to turn on DHCP to avoid connection failure.

Wireless connection with Wi-Fi router

• Step1: Connect your projector to a Wi-Fi router
• Step2: Connect your ioS device to the same Wi-Fi router.
• Step3: Turn on Screen Mirroring on your i0S device, select Display_3174 of the projector.

Wired connection
Enter iOS Screen, connect your ioS device to the projector OUT 5V port with a USB cable. Your iOS device will receive a trust prompt, confirm trust”, then the Screen mirroring will start,
Note: If your iOS device doesn’t receive a trust prompt after connect to the projector, please use the original iOS device cable to try again.

Screen setting

• Step1: Select SyncScreen Setting from syncscreen,press the OK key to enter
• Step2: Choose the setting you want.The settings include three functions: WIFI/System Upgrade/ More Setting.
• WIFI: Search and Connect WiFi.
• System Upgrade : OTA upgrade/ USB upgrade.
• More Setting: System Reset/ Mirror Mode /WIFI Channel/ Language.

WIFI Connection

• Step1: Select WIFl and press the OK key to enter the next interface.
• Step2: Select the Wi-Fi that you want to connect from the Wi-Fi list.
• Step3: Enter the correct password through the virtual keyboard. Select the Wi-Fi that has been connected, press the OK key, and three options will pop up.
• Disconnect: Disconnect the Wi-Fi connection this time, but it will be automatically connected after restarting.
• Forget: Forget the password. After restarting, it will not automatically connect. The password must be entered again for re-connection.
• Cancel: Exit the menu.
  OTA upgrade / USB upgrade

MORE SETTING

• Step1: Select More Setting, press OK key to enter the
  interface

• Step2: Choose the setting you want.
  Select System reset and press ok tn enter ,and two options will pop up. Click YES to confirm reboot the system, Click No to exit the selection.

  • Note: if you feel some caches when playing video, you can press here to reboot systerm and can be smooth picture

Mirror Mode: Smooth/ Standard /Quick.

1. Smooth Mode: Requires higher network to optimize the effect of playing video, and caches the video to ensure smooth pictures during playback.
2. Standard Mode: Reduces the cache and delay of the mirroring.
3. Quick Mode: No video caching function. When the network environment is poor, the clarity of the mirroring will be lower to ensure smooth playback and reduce delay.

WIFI Channel: Can set the channels for 1, 6 and 11 routers. When the network is pooryou can set other channels to avoid the jam and delay.
Language: you can choose English or Chinese for system, and system language will not be changed after reboot.

MEDIA CONNECTION

User Guide Page Setting
Turn on the projector,must select the first language thencan use the machine.once choose the system language will not change in future. Only enter set page can change system language again.
Media Connection
If connect the USB port on the projector.you can select movie,music,photo,text on the homepage of the list.

Media Selection
One way you can select movies, music, photo, and text on the homepage of the list is after connecting the USB port on the projector. Another way is to connect USB port, then select UDISK enter, thus you can select movie ,music, and photo.text onthe second homepage list. So please make sure the projector only can read the USB on the homepage.

HDMI Euipment Connection
Please make sure on the homepage current, HDMI slot could connect to computer and all the devices with H DMls slot. As connected, select the HDMI enter to use.

AV Video Device Connection
Please make sure on the homepage current, Use 3 in 1 cablevideo convert cable, connect projector AV slot, the connection methods as the picture below ,ad connected. Choose the input sou rce:AV. Support format: NTSC/PAL, As connected, select the AV enterto use.

SMM Audio Devlice Connection
Please make sure on t he homepage current, Could connec.tto a 3.5mm earphone or a speaker equipment.

CONNECTION INTRODUCTION

• * •Could connect mulU-device and applications.

SETUP MENU

Open the home page-“Set” on the homepage, then will see the main menu page. On the main menu page ,including Video Setting, Projector Setti ng,Sound Setting,System Setting.parts.

Video Setting
In the Video Setting page, you can setup the picture mode, aspect ratlon,color temperature, reduce display size and portable power mode.

Projector Setting

In the Projector Setting page, you can setup the image of direction.

Sound Setting

In the Sound Setting page, you can setup sound mode, surround sound ,and auto volume mode.

System Setting
In the System Setting page, you can setup OSD language,OSD durat ion, software update and restore factory default . You can see the detail machine info on the last item of the system page.

IMAGE FOCUS

Put the projector vertically to the proj ector screen or a white wall, adjustthe Focus Lever until the image is clearenough, then the focus is finished. During the focusing, you could display video or the menu to check the focus adjust.

PARAMETERS

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• Alza | Alza.fr
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>