KUULAA KL-X62 AUX Bluetooth Receiver User Manual

KL-X62 AUX Bluetooth Receiver

User Manual

Thank you for choosing KL-X62, for your better understand and use In this product, please read the instruction carefully on direction this manual for future use and reference

By using this product, you only need one plug to upgrade the audio system In your home or car to a wireless system. You will be able to experience the convenience of wireless Bluetooth In all aspects

Wider Compatibility

Compatible with smart phones/tablets with Blue tooth

Specially for Car

Kl·X62 equipped o noise is a noise technology. This can help you removes the power naise of cars when using lt Ensuring you a better hearing

Switch Automatically and Free

Config the output preference on your IOS or Android device, and KL·X62 will be able to switch to BT headset for phone call, and for audio play automatically

Share Mode

Unlike most other Bluetooth music receiver in the market that only supports one device connection at a time, KL-X62 allows two different devices to connect at the same time. You can turns to other devices to play without disconnecting the existing Bluetooth. When the LED light is flashing, any device can be paired. For the 2nd device to pair with, It requires the device to have had paired with KL-X62 before. KL-X62 can remember up to 8 devices. When switching between devices for playback, it will take Android around 5sec to switch and 11 sec for 10S.

Softy Instructions

• Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
• Do not operate the unit if it has been exposed to water, moisture, or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit.
• Do not puncture or harm the exterior surface of the product in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician.
• Improper repairs may place the user at serious risk and will invalidate any product warranty and liability from the manufacturer.
• Keep the unit free from dust, lint, etc.
• Do not use this unit for anything other than its intended use or purpose.
• Doing so may damage the device.
• This product Is not a toy. Keep out of reach of children.
• Do not expose batteries, battery pack, or batteries installed to excessive heat, such as direct sunlight or open flame.

Instructions

1. Insert the USB head of the Bluetooth adapter cable into the USB port of the car or the USB port of other devices for power supply, and plug the 3.5mm audio plug Insert the car audio interface or other device audio interface. USB Bluetooth adapter cable automatically enters after being connected to power. In boot mode, the blue LED Indicator flashes. After the Bluetooth connection is successful, the Bluetooth LED indicator is always on. (Tip, if there is no USB port beside the audio port, please use the car USB adapter and extension cable to connect the device.)
2. Find the device name ‘KL-X6r in the “Settings”-” Bluetooth if of the phone to connect. After the connection is successful, audio playback can be performed normally. When pairing for the first time, please keep the distance between this product and the phone within 1 meter.
3. Answering and hanging up the phone: manually operate the phone to answer the phone. After the phone is connected, the user can send sound through the microphone of the product, and the other party’s voice can be played through the car speaker or other audio equipment.

Function Key Description

• 3.5mm Audio Jack
• USB Port
• LED Indicator

Product parameters

• Product name: USB Bluetooth adapter cable
• Material: Aluminum alloy * ABS
• Bluetooth version:5.1
• Bluetooth name: KL-X62
• Communication distance: 5 meters
• Suitable for: Compatible with all Bluetooth devices

FCC Statement

This device complies with port 15 of the FCC Rules Operation is subject to the following two conditions

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Note: This equipment has been tested and found to comply with the limits for a Closs B digital device, pursuant to port 15 of the FCC Rules.

These limits ore designed to provide reasonable protection against harmful interference in o residential installation. This equipment generates uses and con radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving on ten no
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver ls connected
• Consult the dealer or on experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>