FISHER PAYKEL W30SDEI Warming Drawer Installation Guide

June 5, 2024
Fisher & Paykel

FISHER PAYKEL W30SDEI Warming Drawer

 **Installation Guide**

FISHER PAYKEL W30SDEI Warming Drawer Installation
Guide

SAFETY AND WARNINGS

FISHER PAYKEL W30SDEI Warming Drawer - SAFETY AND
WARNINGS

READ AND SAVE THIS GUIDE

WARNING!

To reduce the risk of fire, injury to persons or damage when using the appliance, follow the important safety guides listed below. Read all the instructions before using the appliance.

Installation

  • Please make this information available to the person installing the product.
  • The appliance must be installed by a qualified installer, or Fisher & Paykel trained and supported service technician to avoid faulty electrical connection.
  • Ensure the installation complies with all clearance requirements and applicable standards and regulations.
  • When installed in combination with a companion product, the companion product can be placed directly onto the appliance. A built-in shelf at the base of the cabinetry must be able to support the weight of both products.
  • Ensure the cabinetry is square and level and with correct dimensions.
  • If installing the appliance directly underneath an oven, ensure you do not damage the oven’s lower trim. Fisher & Paykel does not accept any responsibility for any damage resulting from incorrect installation.
  • Before installing the appliance, inspect for any signs of damage. Do not install or use damaged appliances.
  • Be careful when stacking the appliances on top of each other to avoid damage to the appliances.

Electrical

  • All connections for electrical power and earthing must be done by a qualified electrician and must comply with local codes and ordinances.
  • Before installation, ensure that the voltage and frequency listed on the data plate corresponds with the household electrical supply.
  • When combining with another appliance, ensure each appliance has its own power outlet. Avoid sharing the power point to prevent accidental switching off of the appliance.
  • Ensure your appliance is properly grounded (earthed).
  • Connect the drawer to a properly rated, protected and sized power supply circuit to avoid electrical overload.
  • Do not use an extension cord or a portable electrical outlet device (e.g. multi-outlet outlet box) to connect the drawer to the power supply. Ensure the power supply cord is located so that it will not be stepped on, tripped over or otherwise subject to damage or stress.
  • Ensure there is a switched outlet in an easily accessible area within 35 7/16” (900mm) of the centre rear of the product.

Servicing

  • Do not repair or replace any part of the appliance unless specifically recommended in the user guide. All other servicing should be done by a Fisher & Paykel trained and supported service technician or qualified person.
  • Always disconnect the power supply before doing any installation, maintenance or repair work.
  • If the power supply cord is damaged, it must be replaced by a qualified electrician or Fisher & Paykel trained and supported service technician.

INTEGRATED WARMING DRAWER

FISHER PAYKEL W30SDEI Warming Drawer - INTEGRATED WARMING
DRAWER

UNPACK YOUR PRODUCT

Remove the warming drawer and accessories box from the packaging. Recycle the materials that can be reused. Dispose packaging materials in accordance with local regulations on waste disposal.

Inspect the warming drawer for any signs of damage. Do not install the warming drawer if it has been damaged. If the product is damaged, contact your local Fisher & Paykel dealer.

FISHER PAYKEL W30SDEI Warming Drawer - UNPACK YOUR
PRODUCT

ELECTRICAL SPECIFICATIONS

All electrical work must be done by a qualified electrician, or a Fisher & Paykel trained and supported service technician.

FISHER PAYKEL W30SDEI Warming Drawer - ELECTRICAL
SPECIFICATIONS

  • The power outlet must be earthed and located within 35 7/16” (900mm) of the centre rear of the product.

PARTS SUPPLIED

FISHER PAYKEL W30SDEI Warming Drawer - PARTS SUPPLIED

HANDLE KITS

The handle kit is not supplied and must be purchased separately through an authorised Fisher & Paykel dealer. Visit fisherpaykel.com for more information.

Contemporary style handle kit

FISHER PAYKEL W30SDEI Warming Drawer - Contemporary style handle
kit

Professional style handle kit

FISHER PAYKEL W30SDEI Warming Drawer - Professional style handle
kit

PRODUCT DIMENSIONS

FISHER PAYKEL W30SDEI Warming Drawer - PRODUCT
DIMENSIONS

CUSTOM PANEL DIMENSIONS

The custom panel must be supplied by the customer to match the cabinetry.

FISHER PAYKEL W30SDEI Warming Drawer - CUSTOM PANEL
DIMENSIONS

CABINETRY DIMENSIONS

FISHER PAYKEL W30SDEI Warming Drawer - CABINETRY
DIMENSIONS

INSTALLATION OPTIONS

STANDALONE INSTALLATION

This installation is suitable for Minimal, Contemporary & Professional Warming drawers. A fixed shelf must be installed above the warming drawer.

FISHER PAYKEL W30SDEI Warming Drawer - STANDALONE
INSTALLATION

COMBINED WITH SINGLE OVEN

This installation combines 30″ Warming Drawer with 30″ Fisher & Paykel wall oven. The warming drawer can support the weight of the oven sitting directly on top.

FISHER PAYKEL W30SDEI Warming Drawer - COMBINED WITH SINGLE
OVEN

COMBINED WITH COMPANION PRODUCT

This installation combines 24′ or 30″ Warming Drawer with 24″ or 30″ Fisher & Paykel companion product. The warming drawer can fully support the weight of the companion product sitting directly on top.

FISHER PAYKEL W30SDEI Warming Drawer - COMBINED WITH COMPANION
PRODUCT

COMBINED WITH DOUBLE OVEN

This installation combines 30″ Warming Drawer with a 30″ Fisher & Paykel double oven. The warming drawer can fully support the weight of the double oven sitting directly on top.

FISHER PAYKEL W30SDEI Warming Drawer - COMBINED WITH DOUBLE
OVEN

TRIPLE STACK COMBINATION

This combination is suitable for 30″ Warming Drawers. A shelf is required above the oven to support the 30″ companion product. Ensure the bottom shelf can fully support the weight of all appliances.

FISHER PAYKEL W30SDEI Warming Drawer - TRIPLE STACK
COMBINATION

ATTACH THE HANDLE

To attach the handle, refer to the installation guide included with the Handle kit (purchased separately).

FISHER PAYKEL W30SDEI Warming Drawer - ATTACH THE
HANDLE

INSTALLING THE DRAWER

FISHER PAYKEL W30SDEI Warming Drawer - INSTALLING THE
DRAWER

FISHER PAYKEL W30SDEI Warming Drawer - INSTALLING THE DRAWER
2

ADJUSTING THE DEPTH

The depth of the front panel of the warming drawer can be adjusted to align with the surrounding cabinetry

FISHER PAYKEL W30SDEI Warming Drawer - ADJUSTING THE
DEPTH

ADJUSTING THE HEIGHT

The front panel of the warming drawer can be adjusted vertically to align with the surrounding cabinetry

FISHER PAYKEL W30SDEI Warming Drawer - ADJUSTING THE
HEIGHT

INSTALLER CHECKLIST

IMPORTANT!

Read all installation instructions in this manual to see if the unit has been correctly installed.
Ensure that installation has been completed correctly before use.

Ensure that:

♦ the warming drawer is level and securely fitted to the cabinetry.
♦ any internal packaging has been removed from the drawer.
♦ the isolating switch is accessible to the customer.
♦ the bottom shelf can fully support the total weight of the combined appliances.

Test operation:

♦ Open the drawer.
♦ Press the button to turn the warming drawer on
♦ Shut the drawer.
♦ After 5-10 minutes, open the drawer to ensure heating has started.
♦ Press the button to turn the warming drawer off and shut the drawer

Complete and keep for safe reference:

FISHER PAYKEL W30SDEI Warming Drawer - Complete and keep for safe
reference

fisherpaykel.com

© Fisher & Paykel Appliances 2021. All rights reserved.

The models shown in this guide may not be available in all markets
and are subject to change at any time.

The product specifications in this guide apply to the specific products and
models described at the date of issue. Under our policy of continuous product
improvement, these specifications may change at any time.

For current details about model and specification availability in your country,
please go to our website or contact your local Fisher & Paykel dealer.

592266B 04.21

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Fisher & Paykel User Manuals

Related Manuals