Menglang 9S Wireless Headphones Instruction Manual

June 5, 2024
Menglang

Menglang 9S Wireless Headphones

Package Contents

Menglang 9S Wireless Headphones Fig1

  • User Manual* 1
  • Wireless Headphones *1
  • 3.5mm Audio Charging Cable * 1
  • USB  Cable with Mic1

Before Use

Menglang 9S Wireless Headphones Fig2

  1. Fully charge the wireless headphones
    Note: Before using the headset for the first time charge for at least 2 hours.

  2. Plug the Micro-USB cable into the port-on the headset.

  3. Plug the opposite, USB end into the USB port on a computer or compatible AC adapter

  4. The red LED will turn on to indicate that the unit is charging.

  5. Once fully charged, the red LED will turn blue.

Connect

Menglang 9S Wireless Headphones Fig3

  1. Place headset within 33ft from Bluetooth-enabled device.
  2. Switch the power button to the left direction to turn on the headphones, you will hear a prompt.
  3. After opening the phone Bluetooth, click the <9S> to pairing.
  4. If it can not pair for 2 seconds, it will flash quickly with red and blue to indicate Bluetooth pairing mode.
  5. The headset will automatically turn off after half an hour without pairing.

Audio Line

Menglang 9S Wireless Headphones Fig4

operation

Menglang 9S Wireless Headphones Fig5

  1. Short press for Play/ Pause/ Phone Answer/Hang Off and search FM while in FM mode. Short press twice to redial the last number

  2. Short press for Previous Track/ FM station. Hold on to the button for Volume Down.

  3. TF Card Slot (Card is not included).

  4. Sort press to switch play mode (Bluetooth / FM mode/TF mode ). Hold on to the button to reset the headset into a pairing state.
    Micro Charging Port.

  5. 3.5mm Aux plug-in port.

  6. MIC

  7. Short press to select six kinds of EQ experience.

  8. Short press for Next Track/ FM station.

  9. Hold on to the button for Volume Up.

  10. Power On/Off

  11. Indicator Light

Menglang 9S Wireless Headphones Fig6 Menglang
9S Wireless Headphones Fig7

Reset

If headphones have any connection or function problems, please reset the headphones.

  1. Delete the Bluetooth pairing information on the phone.
  2. Long press the M button for 3 seconds until the flash quickly with red and blue.
  3. Connect to the phone Bluetooth again. (If the above operation does not work, please try again.)

Satety Information

  • If no pairing connection after the headset enters the pairing mode, please tum off the headset to save power.
  • Do not perform other operations while pairing the headset to prevent the program error.
  • Please select a proper volume while using to prevent damage to your ears.
  • Please note that a good environment for using the headset can avoid damage to the headset.
  • Please charge the headset after a long time none-use.
  • When it’s dharging with a USB cable, please turn off the power in order to avoid noise.

Specifications

Menglang 9S Wireless Headphones Fig8

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

  • Reorient the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals