EINOVA WP0403010 Fast Wireless Charging Mundus User Manual
- June 5, 2024
- EINOVA
Table of Contents
EINOVA WP0403010 Fast Wireless Charging Mundus
**
**
OVERVIEW
Package content
Mundus UV-C Phone Disinfector and Qi Wireless Charger | Cable 180 cm (6 ft) | Power adapter.
Product overview
Thank you for choosing Mundus from Enova. Simultaneously clean and charge with Mundus: one UV-C lamp, two UV-C-LED lights, ozone, and titanium dioxide kill 99.99% of surface bacteria and viruses of items placed inside the dual-chamber with UV-C light, and charges your Qi-enabled device at the same time. Compatible with all Qi-enabled devices. Please read the user manual before using the product.
How to use
UV-C Light Smartphone Disinfector
One powerful UV-C lamp, two UV-C LEDs, ozone, and titanium dioxide kill 99.99% of viruses and bacteria in one fast 8-minute disinfection cycle.
Qi Wireless Charger
The Qi wireless charging spot on the top of the unit lets you wirelessly charge Qi-enabled devices including iPhone 8 and newer, AirPods, Samsung Galaxy s8, S9, S9 Plus, and many more.
Simultaneous Charger-Disinfector
Use both of the above capabilities simultaneously for powerful combination of cleaning and charging.
Quadruple Disinfection
Mundus uses four distinct methods of disinfection that together destroy 99.99% of surface viruses and bacteria. Mundus has been certified by Intertek and the Environmental Protection Agency as safe and effective surface sterilizer.
- One UV-C lamp emits UV-C light, tuned to 264 nm to hit a germicidal peak. The UV-C light works by damaging the microbial DNA.
- Two UVC-LED Flights also emit UV-C light, but of a slightly higher lightwave frequency than the UV-C lamps. Together, the two sources of Uvc light exert maximum light pressure and target a much broader spectrum of surface microbes.
- The UV-Clamp naturally creates small amounts of human-safe levels of ozone. The ozone molecules destroy the cell wall of surface viruses and bacteria.
- The inner chamber is covered in titanium dioxide. Titanium dioxide has a catalytic effect on UV-C light and ozone, amplifying their efficacy.
Instructions
- Connect Mundus to the power adapter, and plug the wall charger into a power outlet.
- Disinfect your smartphone by placing it inside Mundus and closing the lid. The lid will seal automatically thanks to the magnetic closure. Please see the section LED indicator light below for more information.
- Wirelessly charge your Qi-enabled device by simply laying it on the dedicated spot on the Pure surface.
Smartphone positioning
Adjust the smartphone position to ensure proper alignment with the charging coil of Mundus, marked by the logo. Direct contact is required for wireless charging
Note about UV-C light protection
If the top cover is opened before the disinfection cycle is completed, the UV-C lamps and LEDs will turn off automatically and the cycle will be paused until the lid is closed again. Your eyes will always be completely protected from the effects of UV-C light.
LED indicator light
- The touch-sensitive LED indicator light is in the shape of a circle, divided into four quarters that blink according to the completion status of the sterilization cycle. One full sterilization cycle takes 8 minutes to complete.
- The LED light remains OFF when simply connected to the power supply.
- Press the LED light to begin a sterilization cycle. The first quarter of the circle will begin to blink, signaling that the sterilization cycle has begun.
- After 2 minutes: The first quarter of the LED circle will stop blinking and remain steadily ON. The second quarter will begin blinking.
- After 4 minutes: Half of the LED circle will remain steadily ON. The third quarter of the circle will begin blinking. At this point, the substantial part of the sterilization cycle is now completed.
- After 6 minutes: Three-quarters of the circle will remain steadily ON.
- The final quarter of the circle will begin blinking. After 8 minutes: The full LED circle will remain steadily ON, signaling that the sterilization cycle is completed.
- The full circle will remain ON until the lid is opened.
- Opening the lid mid-cycle will cause the LED light to pause any blinking and remain steady, signaling that the cleaning cycle has been interrupted and is not yet complete.
Specifications
- MUNDUS Dimensions: 19,5 x 12 x 6,5 cm (7.6 x 4.7 x 2.5 in)
- Weight: 0,45 g (1 pound)
- Wireless output: 5W, 7.5W, 10W fast charge
- USB-C input: 5V 3A, 9V 2A, 12V 1.5A
- Color: White. 5W UV-C: 1x LAMP +2x LEDs.
- CABLE 180 cm (6 ft). POWER ADAPTER Input: 100-240V 50-60Hz 0.SA
- Output: QC 3.0 5V 3A, 9V 2A, 12V 1.5A 18W max.
Troubleshooting
If the product is not working properly please first check the troubleshooting guide below. If your situation differs from normal conditions, please try to solve the issue or call customer service at 44 (808) 178 7288 Mon-Fri 9am-5pm (GMT). For full troubleshooting visit our website: www.einova.com/store/support/troubleshooting Does the power outlet work? (normal conditions: yes) Are you using the provided power adapter? (normal conditions: yes) Try charging your smartphone directly with the power adapter using your cable. Does it work? (normal conditions: yes Is the cable correctly attached to the adapter? (normal conditions: yes) Has Mundus been dropped or damaged?(normal conditions: no) Is your smartphone officially compatible with Qi wireless charging or equipped with a Working QI receiver? (normal conditions: yes Is the smartphone correctly aligned with the coil position of Mundus (as shown in the relevant section of the manual)? (normal conditions yes Is there any metal between your smartphone and the charger? (normal conditions: no)
Safety information
- Please read this safety information carefully before using the product to prevent injury to yourself or others and damage to your device.
- Please keep this manual for future reference.
- Do not damage the charging cable. Doing so may cause electric shock or fire.
- Keep the product away from hot surfaces and sharp corners.
- Do not carry or drag the product by the cable.
- Do not use the product if one or more of its components are damaged or faulty.
- Do not look directly at UV light.
- Protect eyes & skin from exposure to UV light.
- The product contains electronic parts. Keep your device dry. Humidity and liquids may damage the electronic circuit of the device and may cause electric shock and fire.
- Handle the product with care. Do not drop your device. It may get damaged or may malfunction.
- Do not disassemble, modify, or repair the product. Any alteration or modification of your device may void the manufacturer s warranty. If your device Needs servicing, contact the manufacturer.
- Do not modify the product in any way. Any modification may increase the risk of injury.
- Do not bite or suck on the device. Doing so may damage the device or result in an explosion or fire
- WARNING: CHOKING HAZARD. Keep out of the reach of children.
- If you notice strange smells or smoke coming from your device, stop using it immediately. Continuing to use the device may result in fire or explosion.
- Continuous exposure to UV light may cause darkening and yellowing inside the inner chamber, Similar to exposure to sunlight after a period of time. This is a normal phenomenon and does not affect sanitizing performance.
- Prolonged exposure to UV light may cause the plastic materials to become discolored or brittle.
- Do not use the device for anything other than its intended use. The device may malfunction or may cause an electric shock or fire.
- Do not leave a battery on prolonged charge when not in use. Never dispose of the device in a fire.
- Avoid exposing your device to very cold or very hot temperatures.
- Extreme temperatures may damage the charger and reduce the lifespan of the device.
- Do not throw away the product with the household trash. The product needs to be recycled and disposed of responsibly.
Limited warranty
For products, warranty visit our website at the page
www.einova.com/store/support/download-
area
This product is meant for use only with appropriate devices. Please consult
your device packaging to determine whether this product is compatible with
your particular device. The manufacturer will not be responsible for any
damages you or any third party that may suffer as a result of use, intended or
unintended, or misuse of this product. You agree to indemnify the Manufacturer
for any resulting injury or damage if the product is used with an unintended
device. Product names, logos, brands and other trademarks referred to within
this product are property of their respective trademark holders. These
trademark holders are not affiliated with our company, our products or our
website. They do not sponsor or endorse our materials.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encOuraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Designed in Italy by Einova| Distributed by Eggtronic Group| Manufacturer: Shenzhen Pilot Technology Co., LTD |EPA Est. No 97617-CHN-1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>