SCANGRIP Bluetooth Light Control App User Guide
- June 5, 2024
- SCANGRIP
Table of Contents
SCANGRIP Bluetooth Light Control App User Guide
Settings
Settings Enable or disable notification of low battery or adjust the time in which the app scans for new lamps.
Consent Review and change your consent to gathering of analytical and crash data.
Web Site Press to access our web site.
Privacy policy Press to read the privacy policy.
Help Press to access the support page
Scanning and connecting
Lamp status
Is shown when an active connection is made. Displays power status and if the
lamp has PIN lock enabled.
Select up to 4 lamps
Select a lamp by pressing their name or the yellow selection dot.
Control > Lamp
Press “Control” and select a lamp to control one of the connected lights.
Refresh/Scan
Press the update icon or swipe down to update the list of lamps.
Groups
Press “Groups” to access Groups screen. Can also be accessed by swiping to the
left.
NOTE:
If the lamp or no lamps can be found on Android, check that location data
(GPS) is enabled and the app has permission to access location.
Group function
Units screen
Select up to 4 lamps
Select a lamp by pressing name or the yellow selection dot.
NOVA 10K and NOVA SPS lamps can be grouped, other models can only be grouped
with lamps from the same series.
Control - > Create group
Press “Control” and select “Create group” to create a group with the connected
lights.
Groups
Press “Groups” to access Groups screen. Can also be accessed by swiping to the
left.
Groups screen
Control
Press to control or delete the selected group.
Group selection
Select a group by pressing name or the yellow selection dot.
Units screen
Press to access Units screen.
Group control screen
On/Off synchronization
The first press of the button turns on the lamps and synchronizes the group to
the chosen setting.
Light icon
Will be off until first press on On/Off, no matter if a lamp in the group is
on.
Sliders
Values will not be sent to lamps until the group is on.
Groups
Press to access Groups screen.
Light control functions for NOVA 10K
Light icon
Shows if the lamp is on and changes with the brightness.
Current brightness
Changes to display the current brightness as shown on the slider.
Brightness slider
Adjust slider or press value to the right to change the brightness.
Rename
Press to change the name of the lamp in the app.
Units
Press ‘Units’ button to return to the Units screen.
Light control functions for NOVA SPS series
Power status
Shows operation time left and battery level depending on whether it is
connected to power supply or is in back-up mode. Time left is updated every
time a command is sent.
Light icon
Shows if the lamp is on and changes with the brightness.
Current brightness
Changes to display the current brightness as shown on the slider.
Brightness slider
Adjust slider or press value to the right to change the brightness.
Rename
Press to change the name of the lamp in the app.
PIN lock
Shows PIN status. Press to lock or clear PIN code on lamp.
Units
Press ‘Units’ button to return to the Units screen.
Light control functions for MULTIMATCH Series
Power status
Shows operation time left and battery level depending on whether it is
connected to power supply or is in back-up mode. Time left is updated every
time a command is sent.
Light icon
Shows if the lamp is on and changes with the brightness.
Current brightness
Changes to display the current brightness as shown on the slider.
Current CCT
Changes to display the current color temperature (CCT) as shown on the slider.
Brightness slider
Adjust slider or press value to the right to change the brightness.
CCT slider
Adjust slider or press value to the right to change the color temperature.
Rename
Press to change the name of the lamp in the app.
PIN lock
Shows PIN status. Press to lock or clear PIN code on lamp.
Units
Press ‘Units’ button to return to the Units screen
Light control functions for AREA 10 SPS
Power status
Shows operation time left and battery level as well as when in back-up mode
and mains power. Time left is updated every time a command is sent.
Light icon
Shows if the lamp is on and changes with the brightness.
Current brightness
Changes to display the current brightness as shown on the slider.
Brightness slider
Adjust slider or press value to the right to change the brightness.
180°/360° buttons
Press to change between complete and directional lighting.
Rename
Press to change the name of the lamp in the app.
PIN lock
Shows PIN status. Press to lock or clear PIN code on lamp.
Units
Press ‘Units’ button to return to the Units screen.
Light control functions for SITE LIGHT Series
Power status
Only mains powered. A loading spinner appear until the command is received.
Light icon
Shows if the lamp is on and changes with the brightness.
Current brightness
Changes to display the current brightness as shown on the slider.
Brightness slider
Adjust slider or press value to the right to change the brightness.
Rename
Press to change the name of the lamp in the app.
PIN lock
Shows PIN status. Press to lock or clear PIN code on lamp.
Units
Press “Units” button to return to the Units screen.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>