MIPRO MPB-24 2.4 GHz Antenna Booster User Guide

MIPRO MPB-24 2.4 GHz Antenna Booster

100% Made in Taiwan

Antenna Booster

Part Names. Fig. 1

1. RF Output Connector
2. Power Indicator
3. RF Input Connector

MPB-24 Application

1. General Environment. Fig. 2:

2. Long Cable Set-Up. Fig. 3:
   

3. Multiple Receivers. Fig. 4:
   

MPB-58 Application

General Environment. Fig. 5:

Cable Connection Recommendation

1. 20-meter RG-58NU cable with MIPRO MPB-24 antenna booster connection is highly recommended for enhanced signal strength boost.
2. 10-meter RG-58/U cable with MIPRO MPB-58 antenna booster connection is highly recommended for enhanced signal strength boost.
3. Insufficient or exceeding signal strength will occur if the cable used is too long or too short.
4. Note: Refer to the actual product in the event of product description discrepancy.

All rights reserved. Do not copy or forward without prior approvals of MIPRO.
Specifications and design subject to change without notice. YM 021/08

Disposal

Dispose of any unusable devices or batteries responsibly and in accordance with any applicable regulations.
Disposing of used batteries with domestic waste is to be avoided! Batteries / NiCad cells often contain heavy metals such as cadmium(Cd), mercury(Hg) and lead(Pb) that makes them unsuitable for disposal with domestic waste. You may return spent batteries/ accumulators free of charge to recycling centres or anywhere else batteries/accumulators are sold. By doing so, you contribute to the conservation of our environment!

All rights reserved. Do not copy or forward without prior approvals of MIPRO. Specifications and design subject to change without notice. YM 021/08

MIPRO Electronics Co., Ltd
Headquarters: No. 814, Beigang Rd., Chiayi City 600079, Taiwan

Tel : +886.5.238.0809
Fax : +886.5.238.0803
www.mipro.com.tw
[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>