eufy Security Smart Track Link User Manual

: June 3, 2024
: Eufy

eufy Security Smart Track Link

AT A GLANCE

①Hanging Hole
②Button
③Built-in CR2032 Battery
④Battery Cover
⑤Buzzer

ACTIVATING FOR

THE FIRST TIME

Remove the insulating tab to activate the battery.

WORKING WITH

EUFY SECURITY APP

Add Your Device

Download and install the eufy Security app from the App Store (iOS devices) or Google Play (Android devices)
|
---|---
Sign up for a eufy Security account, then follow onscreen instructions to add your SmartTrack Link to the device list.

Ring Your Phone Even If the Phone is Silent

Turn on Find Phone in the eufy Security app.
Make sure the eufy Security app is always allowed to get the locations.
Press the button on the front panel, it will ring your phone when connected.

QR Code Helps People Contact You While You Lost Items

Turn on Lost Mode in the eufy Security app.
Fill in the contact details and thank the person who found the item.
Scan the QR code on the SmartTrack Link with any QR code recognition software.

WORKING WITH

APPLE FIND MY APP (APPLE USERS ONLY)

You can add your eufy SmartTrack Link to Find My on your iPhone, iPad, or iPod touch.
When you’ve left something far behind, like at the beach or the gym, the Find My network — hundreds of millions of iPhone, iPad, and Mac devices around the world — helps track down your device. And itʼs designed to protect your privacy every step of the way.

What You Need

An iPhone, iPad, or iPod touch with iOS 14.3 or iPadOS 14.3 or later and twofactor authentication turned on.
Find My turned on.
Bluetooth turned on.
A strong Wi-Fi or cellular connection.
Location Services turned on: Go to Settings > Privacy > Location Services.
To use Precision Finding and see the most accurate location for your eufy SmartTrack Link, turn on Location Access for Find My. Go to Settings > Privacy > Location Services, then scroll down and tap Find My. Check While Using the App / While Using the App or Widgets, then turn on Precision Location.

Add Your Device

Open the Find My app, and tap +, then tap Add Other item .
Press and hold the button of the SmartTrack Link for two seconds until you hear a ring.
Select an item name from the list, or select Custom Name to name your SmartTrack Link, choose an emoji, then tap Continue.
To register the eufy SmartTrack Link with your Apple ID, tap Continue again.
Tap Done, now you can attach your SmartTrack Link to your item and see it in the Find My app.

If you can’t set up your SmartTrack Link:

Make sure that your eufy SmartTrack Link is ready for setup. (Refer to What You Need)
If you have multiple eufy SmartTrack Links to set up, make sure that only one is near your device at one time.
If your SmartTrack Link still won’t connect to your device, try to reset it. (Refer to Reset)

If you see a message that says your SmartTrack Link is connected to another Apple ID:

Make sure you have removed this SmartTrack Link in the Find My app if you plan to use another Apple ID to add this device.
If you are adding this device for the first time and encounter this issue, please contact support@eufylife.com to get help.

Perform Serial Number Lookup

Locate the button on the front of the product.
Press the button two times.
You will hear the confirmation sound.
Tap Continue On Website for more information including any Lost Mode message from the owner.

Disable Find My Network

Open the product‘s back cover to find the battery.
Remove the battery.
This will stop sharing the location of this item.

REPLACING THE

BATTERY

When the power is depleted, open the back cover, then install a new CR 2032 battery to replace the old one.

RESET

Quickly press the button for five times in five seconds.
Press and hold the button for five seconds until you hear a ring. Now your eufy SmartTrack Link has been successfully reset.

NOTICE

Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.

Apple, Apple Watch, iPad, iPadOS, iPod touch, Mac, and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by
Anker Innovations Limited. is under license. Other trademarks and trade names are those of their respective owners.

Notice (EU and United Kingdom)

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/ .

This product complies with the radio interference requirements of the United Kingdom

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UK declaration of conformity is available at the following internet address: https://uk.eufylife.com .

Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for the product and accessories is -20°C to 60°C.

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

RF exposure information

The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=0cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 0cm distance between the device and human body.

Frequency bands and power as below:

Bluetooth Operation Frequency: 2402-2480MHz; Bluetooth Max. Power:4.55Bm
The following importer is the responsible party (contract for EU matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Notice (United States of America)

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements.

The device can be used in portable exposure condition without restriction.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address:10900 NE 8th St, Ste 501, Bellevue WA 98004
Telephone:1-800-988-7973

Notice (Canada)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

IC RF Statement

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
Lors de l’utilisation du produit, maintenez une distance de 20cm du corps afin de vous conformer aux exigences en matière d’exposition RF