jar-owl V2020 2.4G Wireless Keyboard and Mouse Combo User Manual
- June 5, 2024
- jar-owl
Table of Contents
V2020
USER′S MANUAL
Installing the Batteries
Wireless keyboards use one AA alkaline battery, Wireless mouse uses one AA
alkaline batteries
Installing Batteries in the Mouse
Step 1. Open the battery compartment
Step 2. Insert the batteries as shown inside the battery compartment.
Step 3. Replace the cover.
Install the batteries in the keyboard
Step 1. Remove the battery compartment cover on the bottom of the
keyboard by squeezing the cover in from the tab to release it.
Step 2. Insert the batteries as shown inside the battery compartment.
Step 3. Replace the cover.
Connecting the Receiver
The receiver is inserted into a USB port immediately, or by an extra USB cable.
- Connect the USB plug to the USB port of your computer.
Obtain the receiver on the mouse
- when you won’t use the mouse, you can take out the receiver to the computer
- when you need to stop the work or travel, you can store the receiver on the mouse for the moving
product description
- Num Lock
- Caps Lock
- Low power and wireless connection indicator light
wireless mouse
Restoring factory default settings
When you find this set doesn’t work, you can make the mouse in working condition by restoring the mouse back to factory default settings.
- Check the battery volume is normal; if the battery is used out, please replace new batteries.
- For the mouse, press the right button and middle button (under the scroll wheel simultaneously; then …
- Insert the nano receiver onto the USB port of the PC or notebook.
- For the keyboard, press the “Esc” and “K” keys simultaneously; then…
- Insert the nano receiver onto the USB port of the PC or notebook.
State of standby and wake up the mouse
Your RF2.4GHz mouse has economized model, that when your mouse no any click
or scroll or moving, the mouse will come to a sleep state for the economize
after about 8 seconds; for the wake-up, you can scroll the wheel or click any
button for this. (In this economized state, the optical LED will turn off, so,
the mouse moving will not respond)
Power-Save function:
- This mouse is equipped with the Traveling-Power-Save function. When you are traveling with this mouse, the LED of the mouse will be switched off automatically for the purpose of power-save, but the pre-condition is that the receiver is disconnected from your notebook or PC.
- when your mouse no any click or scroll or moving, the mouse will come to a sleep state for the economize after about 8 seconds, for he wakes up, you can scroll the wheel or click any button for this
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.