MINISO BT350 Classic Wireless Headset User Manual
- June 5, 2024
- MINISO
Table of Contents
BT350 Classic Wireless Headset
User Manual
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT PROPERLY
Product Introduction
Product Name: Classic Wireless Headset
Model/Pairing Name: BT350
BT Version: 5.1
Exterior Color: Stack
Product Function: Media player, phone call.
Earphone material: Plastic, stainless steel.
Longest transmission distance: < 15m (Tested in an open area) Button
operation: Power button/ Ni button/ Volume up button (previous track
function)/ volume down button (next track function)
BT standby time: 510011
Talk time: 512h
Music playback time: 512h 150% volume )
Charging port: Micro USB charging port
Input: DC 5V, 150-300mA (Changing according to the battery voltage)
Charging time: About 2.5h
Operation Instructions
Operation| Instructions| ViEsphorsoice Pre:ft/At| Indicator
Light
---|---|---|---
Pairing Name| More-BT330| /|
Turn on| Lo button press 1 Ss poWer n fur| Power on| Flashes blue for Is
Turn off| Long press power
button fo Ss| Power off| Flasher, rod three times. thee 0)011
No tombola) during
pairing for 5 owls.| Power| Flashes red urea times, then go Wt.
at Pairing| Press the ON/OFF button
for Ss So turn on and
enter pairing mode
automatically.| Pawing’| Flashes red and
blue eternally.
Successful pairing with a cellphone| Tun an and search for BT device|
“Corrected’ Ac sue: comfitcanoodle°| Flashes ma
once MSeoly
every 65.
Auto connecting after turning on| After turning it on. it wet pair
automatically with the device which has seen paired beton)| “Connected” rho,
success
cornet:bon| Flashes blue once
sleety every Be.
Disconnecting nom cellphone| Anyroad me Aff on rye
&stance| 13 near| Flashes red and
blue alternately.
Auto connecting with a cellphone after disconnecting| Winn 5 /110a0.5 after
disconnection.
earphone .1.111 pair with coltphono span when they ate put Osteen| Connected.
after surcease connection| Flashes red ard bite ultimately
Filth/Pause the music| VV!In the muck IS
eltheng lap the IA ouiton| /|
Flashes Wye ono° eloMy every 65
nmeousinext track| Pievcat traffic long tress volume up Outten Next hack boll
press I.olune down button| /| /
Volume up/down| Raise the value
tap the volume up button.
Lower Me vohrnu.
lap the tetra down button.
When the volume an adjusted to its highest or its largest there will be a
‘beep” voice prompt| •Seer| /
| | |
When a cell comes| r or 108 phones, the sward of the incoming call
notification through headset we the same as the more.
For Android phones the headset ed beep| Ring tone’ too,| Flashes boo
once every 6s.
Answer a call| When a tail comes. tap
the M button to answer.| 1| i
End a call| Tap tee 10 button
to ‘meg up.| /| /
Reject a call| When a tall comes, long
Press the M button for 2a
to retool.| /| /
Call back| Double click the M button to
radial the last number
you called| 1| i
Voice assistant| Long press the IA button until
you hear a beep to actin
the voice assistant| Beep| I
Lew-battery alert| When the battery voltage Is 3.4 I a lower. 0 veto prompt
-LOW better yea be newt every 30 until the voltage decreases to 3 IV Then the
product may turn off automatically| ‘Low battery”| Flashes red once Manly
every 2s.
Low-battery
shutdown| The product with Wm oft
automatically when the
battery voltage decreases
to 3 ‘IV.| Power cm| 1
When being
charged| About 2.5his needed for a full charge The Indic: Coo Ight wit turn
red when the product Is being charged.| /| Turn rod
When fully
charged| When fully charged. the LED light MI two blue.| /| Tint blue
Cautions
- Reasonable control of the volume and time of usage is required to avoid hearing damage.
- For your safety, do not use it in potentially hazardous conditions.
- Do not listen to music. call up or answer the phone while driving to avoid danger caused by distraction
- Keep it out of reach of children to avoid danger caused by improper use.
- Do not throw it to avoid damage caused by dropping.
- Do not store or use it under -20°C or above 40°C to avoid shortening the lifespan of the earphones and batteries.
- Do not modify, disassemble or repair the product
- Irreplaceable battery. It should be disposed of according to local rules & regulations or be recycled by a professional institute. Do not throw away or toss it into the fire.
- When not in use for a long time. charge the earphones every 3 months to extend their service life.
Troubleshooting
-
Fail to pair the wireless earphones with your cell phone.
Solution: Check if the earphones are in pairing mode and whether the phone has a BT function. Check the list on your phone, remove the earphones from the list, and follow the instructions of the user manual to pair the earphones with your phone again. -
Cannot turn on the wireless earphones.
Solution: Check the battery to see if it is low. -
Can the battery of the wireless earphones be replaced?
Answer: No. The lithium-polymer battery in the earphones is irreplaceable. -
The wireless earphones got disconnected from the phone within 15 meters.
Solution: BT is wireless so it is very sensitive to objects between the earphones and the connected device. Check if there are any metal or other objects that may affect the connection within the effective distance. -
Cannot hear audio playing when the earphones are connected to the computer or phone.
Solution: Check whether the computer’s audio output is already connected to the wireless device and whether the Bluetooth in the computer supports the A2DP protocol. Make sure the volume is up on your phone or computer. -
Can I operate the Apps of my phone through the earphones after connecting the wireless earphones to the phone?
Answer: Some apps may not support being operated through earphones due to their settings.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
ISED Warning
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The device haS been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
MADE. IN CHINA
www.miniso.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>