LITOSSA MF-BHD03 Flex S2 Wireless Neckband Headphones User Manual
- June 5, 2024
- LITOSSA
Table of Contents
User Manual
Contenido del envase
Wireless Neckband Headphones
Flex S2
In the package
Product Diagram
Specifications
| Name | Wireless Neckband Headphones |
|---|---|
| Model | MF-BHD03 |
| Type | Neckband Bluetooth Earphones |
| Speaker unit | 10mm unit |
| Frequency response | 20Hz-20000Hz |
| Speaker impedance | 16±15% |
| Sensitivity | 103±3db |
| Recharging time | Approx 2h |
| Speakerphone sensitivity | -4db |
Information
-
Choose earbuds of the right size
There are 3 sizes of earbuds. Please try them on and choose the size that fits your ears the best. -
Choose ear flaps of the right size
There are 3 sizes of ear flaps. Please try them on and choose the size that fits your ears the best.
-
Instructions
There are L/R indications on the inner side of each earphone. On the right side is where the neckband has a function button on. Please differentiate L&R and wear the earphones properly.
Functions
-
Magnetic power switch
Pull the magnetic bases together or separate them to turn off or turn on the earphones.
-
Bluetooth pairing
Separate the earphones from the magnetic base, you will hear ‘Hello Litossa’ once the earphones are on，Open Bluetooth on your device and search for “Flex S2” Click
connection（Once successfully connected white indicator light will turn up for 2 secs；
Connected status: No special indications for ‘Play/Pause Audio’.
Another status: white indicator light flashes every 10s).
Button functions
Recharge the earphones
-
Voice notice
‘Battery low’ means the battery level is below 10%, there will be a voice notice every 10 mins. -
LED indicator light
Orange: Recharging
White: Fully Recharged
When the earphones are on and the battery level is below 10%, orange light will flash instead of white light. -
Micro USB input: For recharging
Please recharge your earphones with the cable provided. It takes about 2 hours to fully recharge this product.
Please connect to your computer or use the certified charger to recharge（5V/500mA.
Indicator light
-
Recharging mode
Recharging: Orange light
Fully recharged: White light -
**Bluetooth info
** Earphones in matching mode or disconnected: white light flashes
Connected: white light up for 2 secs
/10s/No notification
Connected while playing music or taking calls: No indication; Others: white
light flashes every 10s
/x2
Power off: orange light flashes twice
- Low Battery indication
During use, the light turns orange when the battery is low.
FAQ
-
Earphones cannot be turned on?
Please ensure the battery level is sufficient. -
Fail to connect with your device？
Please ensure earphones are in matching mode and keep your device close. If still fails to connect, please restart your earphones or your device. -
If your device requires a matching code？ please type in ‘0000’.
-
Automatic connection？
When you turn on the product, it will automatically connect back to -
When the earphones are disconnected, will they automatically turn off?
The earphones will automatically turn off after being disconnected for 8mins.
Warning
- Please do not disassemble this product. It could result in destroying the product and electric leakage.
- This product has a built-in rechargeable lithium-ion battery, please do not disassemble, hit, squeeze or toss it in the fire. If serious damage occurs, please do not use this product again.
- Please do not expose this product to extreme temperatures (below 0℃ or above 45℃)
- Please do not use this product in thunderstorms, Thunderstorms could impact the use of this product, and increase the risk of electric leakage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>