ible Airvida E1 Wearable Air Purifier with Noise-Cancelling Earphones User Guide

Arvada E1 Wearable Air Purifier with
Noise-Cancelling Earphones
User Guide

Overview

Unpacking

Start using air purifier

1. Please press the power button for 3 seconds to turn on the Airvida E1, the power indicator will turn blue and automatically start to purify the air.

2. With negative ion vents facing upwards, gently place the Airvida E1 behind your neck.
   Important: Negative ion vent (carbon fiber brush) should not be covered by anything.

3. Arvada E1 can be put on the silicone base when used on a desk or nightstand. Adjust the negative ion vent toward your face within 30 cm to reach the best performance.

4. When the battery is low, the power indicator light will become orange.

5. To turn off the Airvida E1, please press the power button for 3 seconds then the indicator light will come off.

Tips :
If the power indicator is blinking blue-orange, there might be a malfunction with the Airvida E1, please contact customer support to request service.

Bluetooth pairing and connecting

1. Turn on the Bluetooth function on your smartphone.
2. Please press the Airvida E1 power button for 7 seconds when pairing for the first time with your smartphone, the power indicator will show a fast flashing blue light. Find the “ible Airvida E1” device on your phone to complete the connection.
3. If the pairing is successful, the power indicator will turn to intermittent flashing mode.
4. The paired smartphone can automatically connect to the Airvida E1 when it’s turned on.
5. Bluetooth will be disconnected when out of the connection range. If the disconnection is longer than five minutes, Airvida E1 will automatically turn to power-saving mode. Click the Airvida E1 power button to reconnect with your smartphone.

Start listening to music and phone calls

1. Wear the L and R side earphones corresponding to the left and right ears respectively.
2. Pick a song and play with your smartphone.
3. Operate the buttons to control the music.
4. When receiving a phone call, the music will automatically be paused. Click the power button to answer with the Airvida E1.
5. Switch the calling device to your smartphone by clicking the power button twice.
6. Click the power button again to hang up the phone call.
7. After ending the call, the music will automatically resume playing.

ible | Airvida Connect APP

Install the “ible | Airvida Connect” app and start using it

1. Install the “Bible ｜Airvida Connect” app to your smartphone.

2. Bluetooth connects your smartphone and Airvida E1.

3. You can check the Airvida E1 Bluetooth connection by using the APP.

4. App’s main page will show “CONNECT” if Airvida E1 is not connected to a smartphone.
   Click “CONNECT” to complete the Bluetooth connection.

5. You can use the various functions provided by APP after Bluetooth is connected.

6. Click the “PREVIEW” to understand the operation of Airvida E1 on the APP’s main page.

7. Arvada E1 State description icon:

About ible | Airvida Connect APP air quality information and negative ion controller

1. Turn on smartphone positioning, the APP’s main page will show the air quality index (AQI) of your current location. Please click the left icon to enter air quality information and the negative ion controller page.
2. Click air quality information items to learn more about PM2.5, PM10, and pollen air pollution.
3. You can select the negative ion intensity by the controller as your need (APP will recommend the suitable intensity based on your current local air quality).

Choose the audio mode

1. Pick a song and play with your smartphone.
2. You can choose one audio mode you like in the Equalizer page.
3. You can choose the noise canceling mode you want.

Regional information

1. Enter keywords of the region you want to query.
2. The air quality index of the region your query will show.

General settings

1. Choose the preferred language.
2. Turn on the push notification, APP will remind you to adjust the negative ion intensity to achieve the best protection according to air quality in your position. Set the notification time, APP will send a message at the time you set to inform the air quality status.
3. You can choose whether the Airvida E1 vibrates or not when receiving a phone call.
4. Please complete the warranty registration for customer support services.

How to recharge

1. Use a micro USB charging cable to connect Airvida E1 charging port to a power outlet. The charging indicator will show a red light.
2. Once the charging indicator turns from Red to Green, Airvida E1 is fully recharged.
3. You can also charge the Airvida E1 on the silicone base.
4. The charging time is approximately 3 hours.
5. Please use the original ible charging cable to charge Airvida E1.
   Do not use charging cables from other brands to avoid complications.
   

Replace earplugs

1. There are different sizes of earplugs, you can choose to wear according to your preferences.

2. Please press and hold the earphone device, twist and pull the earplug to remove it.
   Important: when removing the earplugs, do not forcefully pull on the earplugs

3. Please make sure the earplugs replacement is complete and the earphones are working properly.

How to clean

1. Negative ions emitted from the carbon fiber brush attach to harmful pollutants causing them to fall to the ground quicker. These pollutants may accumulate on the
   carbon fiber brush and need to be removed from time to time. Therefore, to ensure optimal performance of your Airvida M1, brush the carbon fiber brush with the cleaning pin provided in the package to remove the pollutants regularly.

2. If the earplugs become dirty, please use a neutral detergent to gently clean and dry them after cleaning.
   Important: Do not pull the earplugs forcefully when removing earplugs.

3. To clean the surface of the earphone, wipe it with a dry soft cloth. If it is extremely dirty, wipe it with cloth along with some diluted neutral detergent. Dry them after cleaning.
   Important: Do not use solvents such as benzene or alcohol for cleaning to avoid damage to the surface.

4. To clean the earphone’s dustproof net, please remove the earplugs first, then clean it with a soft cloth with some clean water. Removing dust, earwax, or any material that may accumulate, do not push any dust or debris into the dustproof net.
   Important: Do not rub the dustproof net forcefully, otherwise it may damage the earphones.

5. To clean dirt or dust near the USB charging port, please wipe it with a dry soft cloth. Do not use water or any other cleaning agents.
   Important: Any sweat, moisture, or moisture near the USB charging port should be wiped off immediately and dried at room temperature, otherwise it may affect the charging function.

Tips :
To prepare the diluted neutral detergent, add one or two drops of detergent to the water for cleaning.

Precautions for use

1. When the power turns on, please do not touch the carbon fiber brush or put other components on it.
2. Arvada products are designed to generate negative ions every 0.6 seconds, so even outdoors, or in places with strong wind, Airvida products can still be used normally.
3. Before cleaning, please make sure that the machine is turned off. Before using any Airvida products, please make sure that the machine is dry.
4. When storing for a long period of time, please turn off Airvida and charge for one hour. Arvada should be charged for one hour every six months. Depending on the differences in storing periods, when Airvida turns on, it may remain in a low battery condition. When storing for a long period of time and starting to use again, please at least charge for one hour.

Safety Precautions

1. People with pacemakers should consult with a doctor for permission before using any Airvida products.
2. Do not immerse Airvida in any liquid or allow liquids to enter the Airvida’s Main Body.
3. Do not try to disassemble any Airvida products in order to prevent fire or unforeseen damages.
4. Stored Airvida away from direct sunlight.
5. Keep away from gas-powered stoves and ovens. Do not use Airvida in flammable, combustible, or humid areas.
6. Prevent heavy impact. The heavy impact will cause potential damage to both the outer casting and inner components.
7. If you feel the main body is overheating, please turn off the device immediately and contact customer service.
8. Arvada is designed to work well in a wide range of temperatures. However, Airvida should not be constantly exposed to above 40° C or below 0° C environments. A higher temperature environment may permanently damage the battery charging capacity and severe cold environments may reduce the battery’s lifespan. Once the battery temperature returns to normal working condition, the battery performance will return to normal.

Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device.

FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End-users must follow the specific operating instructions for satisfying  RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For more information, please refer to www.airvida.co
Or contact the regional distributor
2021 © ible Technology Inc. All rights reserved.

References

• ible Airvida - Wearable Air Purifier | Remove PM2.5, Virus And Pollen Anytime

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>