REFLEXION RF401A Remote Control User Manual

REFLEXION RF401A Remote Control

Item

1. Head up
   Press and hold the HEAD-UP button of the remote, the head actuator moves out, stops when released；

2. Head down
   Press and hold the HEAD DOWN button of the remote, the head actuator moves in, stops when released；

3. Foot up
   Press and hold the FOOT UP button of the remote, foot actuator moves out, stops when released;

4. foot down
   Press and hold the FOOT DOWN button of the remote, the foot actuator moves in, stop when released； When moving to a flat position, the lumbar actuator and tilt actuator move first, after 500ms, the head and foot actuators start moving;

5. Flat
   Click the FLAT button, the bed goes flat, stop when clicking any button during the process of going flat
   

6. Memory position
   Click memory position to move the actuator to the memory position.
   

FCC STATEMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ISED RSS Warning

This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ISED RF exposure statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>