Elgato Wave Mic Arm – Premium Broadcasting Boom Arm with Cable Management Channels, Desk Clamp-Complete Features/Instruction Manual

Elgato Wave Mic Arm – Premium Broadcasting Boom Arm with Cable Management

Channels, Desk Clamp

Specifications

• Product Dimensions, 9.06 x 2.36 x 19.29 inches,
• Weight, 4.91 pounds,
• Style, Kits
• Color , Black.
• Brand, Elgato

The Elgato Mic is an arm stand is a Good premium design with internal springs and hidden cable channels. It’s come with fully adjustable arm and swivel base. It is used to record podcasts, live streaming, gaming are, offices etc. And attach to easily to your PC. Elgato mic arm you can also attach the Microphone with this stand. Elgato mic arm come with the amazing features you can adjust the height according to your sitting position.

What’s in the box?

• Wave arm mic
• Riser extension
• Counterwieght1/4 inch to 3/8 inch and ¼ inch to 5/8 inch
• Adaptors
• Allen Wrench
• Quick start guide

Frequently Asked Questions

• Question: Will it support a Blue Snowball?
  A: The Wave Mic Arm can support mics weighing 250 – 1,000 g / 0.55 – 2.2 lbs. It can accommodate the Blue Snowball’s weight as the Blue Snowball is around 460 g or about a pound.

• Question:  How long is each arm?
  A: Base to elbow is 13 inches. Elbow to ball mount/socket is 15 inches.

• Question: Can someone please confirm/deny that this works with a hyperx quadcast s mic with default hardware? please and thank you!
  A: Yes, the Wave Mic Arm can accommodate 1/4“-3/8“-5/8“ mic mounts which includes the HyperX Quadcast S Mic (the HyperX Quadcast S Mic’s included mount adaptor fits 3/8-inch and 5/8-inch threaded setups).

• Question: Why isn’t this being sold by amazon usa and only amazon uk?
  A: The Elgato Wave Mic Arm LP is available in the US and UK. If you need further assistance, please reach out via support on the Elgato website and we’ll happily assist you.

• Q: Does your microphone pick up keyboard noises when using the low profile arm?
  A: Any microphone could potentially pick up keyboard noises when using any type of low profile arm, not just this arm exclusively. To prevent such noises, you may need to use third party software/mixers to adjust your mic sensitively.

• Q: can the clip on the back of my monitor stand?
  A: You may be able to clamp it to the back of your monitor stand if the monitor stand has space for the padded clamp that can expand to 60mm/2.4 inches.

• Q: Will it fit and work with my rode nt1 mic?
  A: Should work very well with that mic.

• Question: does this work and move to adjust with the hyperx quadcast s?
  A: Yes the arm can is compatible with the HyperX Quadcast S as long as it can take a 1/4 screw thread or an adaptor that can take a 1/4 screw thread. If you need further assistance, please reach out via support on the Elgato website and we’ll happily assist you.

• Q: Would a Blue Yeti Mic be compatible with this?
  A: Yes, the Blue Yeti mic is compatible with the Ball Head that already comes with the Wave Mic Arm LP

• Q: What if the mic is super light? Will it still be adjustable without popping up?
  A: The mic arm comes with a weight that attaches to where the mic mounts if you have a light microphone. I use a RODE NT-USB that weighs 1.15 lbs. I have no issues.

• Q: Can I mount the Blue Yeto mic on here?
  A: Yes, the Blue Yeti mic is compatible with the Wave Mic Boom Arm. The Wave Mic Boom Arm has a ball head that can take 1/4” screw and 3/8”-5/8” adapters so as long as the Blue Yeti can take those thread adapters then it will work.

• Q: Is this arm compatible with a hyperx quadcast s mic?
  A:The arm is compatible with the HyperX Quadcast X S mic as long as it can take a 1/4″ thread screw.

• Q: Can this be clamped to a shelf in front of and above me and articulate down below the clamp level (overhead mount)?
  A: Yes, it is possible to clamp it and have it reach all the way down below the clamp level (overhead mount)

• Q: Can it hande a mirrorless camera like Canon M50? planning to use it for overhead set up?
  A: The Wave Mic Arm can handle any camera setups such as the Canon M50 as long as the camera can take 1/4“-3/8“-5/8“ screw threads.

• Q: Is it compatible with the Razer Seiren X?
  A: I believe so yes, it comes with the adapters needed to fit the seiren X. I’m currently using a seiren pro so yes\

• Q: Does it work with blue Yeti nano?
  A: Yes this works with the Blue Yeti Nano as long as there is a 1/4 thread screw or adaptor with a 1/4 screw thread. If you need further assistance, please reach out via support on the Elgato website and we’ll happily assist you.

• Q: Can the arm hold a Blue Nano microphone? Are there any adapters that come with it?
  A: The arm can hold a Blue Nano provided that the Blue Nano has a place to accept the ball mount 1/4″ screw thread. Please be aware of the weight limitations.\

• Q: Can the arm be permanently mounted to a desk in situations where the clamp cannot be used?
  A: We recommend mounting the Wave Mic Arm LP to your desk via its padded clamp.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>