IKEA 404.948.01 Fullgoera Freezer Freestanding Stainless Steel Instructions

: June 5, 2024
: Ikea

Table of Contents

IKEA 404.948.01 Fullgoera Freezer Freestanding Stainless Steel
Product description
Accessories
First use
Functions
Installation
General information
Technical data
Documents / Resources

IKEA 404.948.01 Fullgoera Freezer Freestanding Stainless Steel

Product description

IKEA-404.948.01-Fullgoera-Freezer-Freestanding-
Stainless-Steel-4

Control panel
Led light
Glass shelves
Rating plate
flaps freezer
Drawers Freezer
Characteristics, technical data and images may vary according to the model.

Accessories

IKEA-404.948.01-Fullgoera-Freezer-Freestanding-Stainless-
Steel-1 IKEA-404.948.01
-Fullgoera-Freezer-Freestanding-Stainless-Steel-2

First use

Connect the appliance to the mains power supply. The ideal temperatures for preserving food have already been set at the factory. Note: After switching the appliance on, it will be necessary to wait for 4 to 5 hours before a temperature suitable for a standard appliance load is reached.

Control panel

A Freezer System Control
B Temperature display
C On/Stand-by
D Fast Freeze
E Eco function
F Black Out alarm
G Turning off the sound alarm H Temperature setting
I System Control

Functions

Freezer System Control
A Freezer System Control is an advanced technology that reduces temperature fluctuations in the whole freezer compartment to minimum. To activate/deactivate the “Freeze System Control” function press for 3 seconds the I button. If the function is engaged and the user modify the freezer temperature out of the working range, the function is automatically switched off. In case of Fast freezing is engaged, the function “Freeze System Control” is inhibited until the Fast Freeze function switched off. On/Stand-by C This function turns On/Stand-by the freezer compartments To put the product in Stand-by, press & hold the C button for 3 seconds. When the appliance is in Stand-by, the light inside the freezer compartment does not work. Remember that this operation does not disconnect the appliance from the power supply. To switch the appliance On again, simply press the On/ Stand-By button.
Note: this procedure does not disconnect the appliance from the electricity supply.

Temperature display B
The display shows the freezer compartment temperature (between -16°C and -24°C). Recommended setting: -18°C or -20° It is possible to set a different temperature with the H button. Fast Freeze D To activate/deactivate the Fast Freeze function press simply. D The Fast Freeze function switches off automatically after 50 hours. Eco function E The Eco function enables appliance energy consumption to be concentrated in the reduced rate hours (generally at night), when electricity is readily available and costs less than during the daytime (only in countries that utilise a time-based multirate system – check energy rates with the local electricity company). To activate the function, press E for 3 seconds at the reduced rate start time (depending on the specific rates plan). For example, if the reduced rate starts at 8 p.m., press the button E at that time. When the Eco indicator is ON, the function is ON. Once the function is activated, the appliance automatically adapts energy consumption according to the time selected, i.e. consuming less energy during the day than at night.

IMPORTANT: To operate properly, the function must be on during the night and day. The function remains on until deactivated (or it is deactivated in case of a power failure or appliance switch-off). To deactivate the function, press the button again. When the Eco indicator is OFF, the function is OFF.
Note: The declared appliance energy consumption refers to operation with the Eco Night function deactivated.

Black Out alarm F
After a power blackout, your product is designed to automatically monitor the temperature in the freezer when electricity is resupplied. If the temperature in the freezer rises above freezing level, the Black Out indicator turns on, the Alarm indicator blinks and the acoustical alarm sounds when electricity is resupplied. To reset the alarm press the Stop Alarm button just once. In case of Black Out Alarm, the following actions are recommended:

If the food in the freezer is unfrozen but still cold, all the food in the freezer should be eaten within the next 24 hours.
If the food in the freezer is frozen, this indicates the food was thawed and then refrozen when electricity was re-supplied

which degrades taste, quality and nutritional value and also could be unsafe. It is recommended to not consume the food but to dispose of the entire content of the freezer. The Black Out Alarm is designed to provide guidance on food quality in the freezer in the event of an electricity blackout. This system does not guarantee food quality or safety and consumers are advised to use their own judgment in evaluating food quality in freezer compartment.

Turning Off the sound alarm G
To mute the alarm buzzer press Stop Alarm button just once To avoid food waste, please refer to the recommended To avoid food waste, please refer to the recommended setting and storage times found in the user manual.

Installation

The appliance must be handled and installed by two or more persons – risk of injury. Use protective gloves to unpack and install – risk of cuts. Installation, including water supply (if any), electrical connections and repairs must be carried out by a qualified technician. Do not repair or replace any part of the appliance unless specifically stated in the user manual. Keep children away from the installation site. After unpacking the appliance, make sure that it has not been damaged during transport. In the event of problems, contact the dealer or your nearest Aftersales Service. Once installed, packaging waste (plastic, styrofoam parts etc.) must be stored out of reach of children – risk of suffocation. The appliance must be disconnected from the power supply before any installation operation – risk of electric shock. During installation, make sure the appliance does not damage the power cable – risk of fire or electric shock. Only activate the appliance when the installation has been completed.

Be careful not to damage the floors (e.g. parquet) when moving the appliance. Install the appliance on a floor or support strong enough to take its weight and in a place suitable for its size and use. Make sure the appliance is not near a heat When contacting our Service Provider, please state the codes provided on your product’s identification plate. The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model identifier that can be used to consult the https://eprel.ec.europa.eu database portal. source and that the four feet are stable and resting on the floor, adjusting them as required, and check that the appliance is perfectly level using a spirit level. Wait at least two hours before switching the appliance on, to ensure that the refrigerant circuit is fully efficient.

WARNING:

When positioning the appliance, ensure the supply cord is not trapped or damaged.
To avoid a hazard due to instability, positioning or fixing of the appliance must be done in accordance with the manufacturer’s instructions. It’s forbidden to place the refrigerator in such way that the metal hose of gas stove, metal gas or water pipes, or electrical wires are in contact with the refrigerator’s back wall (condenser coil).

To guarantee adequate ventilation, leave a space on both sides and above the appliance. The distance between the rear of the appliance and the wall behind the appliance should be 50 mm, to avoid access to hot surfaces. A reduction of this space will increase the Energy consumption of the product. Please remove the power cord from the condenser hook during installation before connecting the product to the power supply. IKEA-404.948.01-Fullgoera-Freezer-
Freestanding-Stainless-Steel-7

Inspection check list
Please follow the inspection checklist before using your appliance. If any answer is NOT please follow the relevant action. Please remember to write down the product serial number and article number as required and attach your receipt to this page.

Product serial number (rating plate) *| |
---|---|---
Product artical number (rating plate) **| |
Purchasing date| |

IKEA-404.948.01-Fullgoera-Freezer-Freestanding-Stainless-
Steel-8

General information

The drawers, baskets and shelves should be kept in their current position unless otherwise specified in this quick guide. The light system inside the refrigerator compartment uses LED lights, allowing for better lighting than with traditional light bulbs, as well as for very low energy consumption. Doors and lids of the refrigeration appliance should be removed before disposal in the landfill, to avoid children or animals getting trapped inside.