GAGGENAU RC202 Refrigerator Instruction Manual

GAGGENAU RC202 Refrigerator

Product Information

Specifications:

• Product: Gaggenau RC202 Refrigerator
• Safety Features: Weight warning, electric shock prevention
• Installation: Proper grounding and power supply required
• Additional Functions: Fast cooling, rest mode

Product Usage Instructions

Safety Information:
It is important to follow safety guidelines to prevent injury or damage. Always read and understand the safety instructions provided in the manual before using the refrigerator.

Installation and Connection:
Proper installation is crucial for the safe and efficient operation of the refrigerator. Follow these steps:

1. Check the scope of delivery to ensure all components are included.
2. Select a suitable location based on the criteria provided in the manual.
3. Install the appliance following the installation instructions carefully.
4. Prepare the appliance for the first use as described in the manual.
5. Connect the refrigerator to the electricity supply using a properly installed socket with earthing.

Familiarizing Yourself with Additional Functions:
The refrigerator may have additional functions such as fast cooling and rest mode. Understanding how to use these features can enhance your experience with the appliance. Refer to the manual for detailed instructions on accessing and utilizing these functions.

Troubleshooting and Maintenance:
If you encounter any issues with the refrigerator, refer to the troubleshooting section in the manual. It guides common problems and solutions. Additionally, follow the storage and disposal guidelines when taking the appliance out of operation or disposing of it.

FAQ:

• Q: What should I do if the appliance is damaged?
  A: In case of a damaged appliance, do not attempt to use it. Contact customer service for assistance and further instructions on how to proceed.

• Q: How do I set up the Home Connect app?
  A: Refer to section 10.1 of the manual for detailed instructions on setting up the Home Connect app for your Gaggenau RC202 Refrigerator.

Safety

Observe the following safety instructions.

General information

1. Read this instruction manual carefully.
2. Keep the instruction manual and the product information safe for future reference or for the next owner.
3. Do not connect the appliance if it has been damaged in transit.

Intended use
This appliance is only intended to be fitted under a counter. Only use this appliance:

1. For chilling food.
2. in private households and in enclosed spaces in a domestic environment.
3. Up to an altitude of 2000 m above sea level.

Restriction on user group

1. This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
2. Do not let children play with the appliance.
3. Cleaning and user maintenance must not be performed by children unless they are being supervised.

Safe transport

WARNING ‒ Risk of injury!
The high weight of the appliance may result in injury when lifted.

• Do not lift the appliance on your own.

Safe installation

WARNING ‒ Risk of electric shock!
Incorrect installation is dangerous.

• Connect and operate the appliance only by the specifications on the rating plate.
• Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
• The protective conductor system of the domestic electrical installation must be properly installed.
• Never equip the appliance with an external switching device, e. g. a timer or remote control.
• When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an isolating switch must be integrated into the permanent electrical installation according to the installation regulations.
• When installing the appliance, check that the power cable is not trapped or damaged.
• If the insulation of the power cord is damaged, this is dangerous.
• Never let the power cord come into contact with heat sources.

WARNING ‒ Risk of explosion!
If the appliance’s ventilation openings are closed off, a leak in the refrigeration circuit may result in a flammable mixture of gas and air.

• Keep ventilation openings in the appliance casing or in the integrated casing clear of obstruction.

WARNING ‒ Risk of fire!
It is dangerous to use an extended power cord and non-approved adapters.

• Do not use extension cables or multiple socket strips.
• Only use adapters and power cords approved by the manufacturer.
• If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted.
• Portable multiple socket strips or portable power supply units may overheat and cause a fire.
• Do not place portable multiple socket strips or power supply units on the back of the appliance.

Safe use

WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.

• Only use the appliance in enclosed spaces.
• Never expose the appliance to intense heat or humidity.
• Do not use steam- or high-pressure cleaners to clean the appli-ance.

WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.

• Keep packaging material away from children.
• Do not let children play with packaging material.
• Children may breathe in or swallow small parts, causing them to suffocate.
• Keep small parts away from children.
• Do not let children play with small parts.

WARNING ‒ Risk of explosion!
If the cooling circuit is damaged, flammable refrigerant may escape and explode.

• To accelerate the defrosting process, do not use any other mechanical devices or means other than those recommended by the manufacturer.
• If food is stuck in the freezer compartment, loosen it with a blunt object such as the handle of a wooden spoon.
• Products that contain flammable propellants and explosive substances may explode, e.g. spray cans.
• Do not store products that contain flammable propellants (e.g. spray cans) or explosive substances in the appliance.

WARNING ‒ Risk of fire!
Electrical devices within the appliance may cause a fire, e.g. heaters or electric ice makers.

• Do not operate electrical devices within the appliance.

WARNING ‒ Risk of injury!
Injury to the eyes caused by escaping flammable refrigerant and hazardous gases.

• Do not damage the tubes of the refrigerant circuit or the insulation.

CAUTION ‒ Risk of harm to health!
To prevent food from being contaminated, you must observe the following instructions.

• If the door is open for an extended period, this may lead to a considerable temperature increase in the compartments of the appliance.
• Regularly clean the surfaces that may come into contact with food and accessible drain systems.
• Store raw meat and fish in suitable containers in the refrigerator so that they do not touch or drip on other food.
• If the fridge/freezer is empty for an extended period, switch off the appliance, defrost it, clean it, and leave the door open to prevent the formation of mold.
• Metal or metal-style parts in the appliance may contain aluminum. If acidic food comes into contact with aluminum in the appliance, aluminum foil ions may pass into the food.
• Do not consume soiled food.

Damaged appliance

WARNING ‒ Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous.

• Never operate a damaged appliance.

• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.

• If the appliance or the power cord is damaged, immediately un-plug the power cord or switch off the fuse in the fuse box.

• Call customer services.
  Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.

• Only use genuine spare parts when repairing the appliance.

• If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.

WARNING ‒ Risk of fire!
If the tubes are damaged, flammable refrigerant and harmful gases may escape and ignite.

• Keep naked flames and ignition sources away from the appli-ance.
• Ventilate the room.
• Switch off the appliance.
• Unplug the main plug from the mains or switch off the circuit breaker in the fuse box.
• Call customer service.

Preventing material damage

ATTENTION!
Using the base, runners, or appliance doors as a seat surface or climbing surface may damage the appliance.

• Do not stand or support yourself on the base, runners, or doors.
• Contamination with oil or fat maycause plastic parts and door seals to become porous.
• Keep plastic parts and door seals free of oil and grease.
• Metal or metal-style parts in the appli-ance may contain aluminum. When aluminum comes into contact with acidic foods, it corrodes and discolors.
• Only store packaged food in theappliance.
• If you clean fittings and accessories in the dishwasher, this may cause them to become deformed or discolored.
• Never clean fittings and accessories in the dishwasher.

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.

• Sort the individual components by type and dispose of them separately.

Saving energy
If you follow these instructions, your appliance will use less power.

Selecting the installation location

• Keep the appliance out of direct sunlight.
• Install the appliance as far away as possible from heating elements, cookers, and other heat sources:
• Maintain a 30 mm clearance to electric or gas cookers.
• Maintain a 300 mm clearance to oil or solid-fuel cookers.
• Never cover or block the exterior ventilation grilles.

Saving energy during use
Note: The arrangement of the fittings does not affect the energy consumption of the appliance.

• Open the appliance only briefly and then close it carefully.
• Never cover or block the interior ventilation openings or the exterior ventilation grilles.
• Transport purchased food in a cool bag and place it in the appli-ance quickly.
• Allow warm food and drinks to cool down before storing them.
• Thaw frozen food in the refrigerator compartment to utilize the low temperature of the food.
• Always leave some space between the food and the back panel.

Installation and connection

Scope of delivery
After unpacking all parts, check for any transport damage and completeness of delivery. If you have any complaints, contact your dealer or our after-sales service

• The delivery consists of the following: ¡ Built-under appliance
• Equipment and accessories1
• Installation material
• Installation instructions
• User manual
• Customer service directory
• Warranty enclosure2
• Energy label
• Information on energy consumption and noises
• Information about Home Connect

Criteria for the installation

WARNING

Risk of explosion!
If the appliance is in a space that is too small, a leak in the refrigeration circuit may result in a flammable mixture of gas and air.

1. Depending on the appliance specifications
2. Not in all countries

• The weight of the appliance ex works may be up to 40 kg depending on the model.
• The subfloor must be sufficiently stable to bear the weight of the appli-ance.

Permitted room temperature

• The permitted room temperature depends on the appliance’s climate class.
• The climate class can be found on the rating plate. → “Appliance”, Fig. 1/4.

• The appliance is fully functional within the permitted room temperature.
• If an appliance with climate class SN is operated at colder room temperatures, the appliance will not be damaged up to a room temperature of 5 °C.

Niche dimensions
Observe the niche dimensions if you install your appliance in the niche. If this is not the case, problems may occur when installing the appliance.

Niche depth

• Install the appliance in the recom-mended niche depth of 560 mm.
• If the niche depth is smaller, the energy consumption increases slightly. The niche depth must be a minimum of 550 mm.

Niche width
An inside niche width of at least 600 mm is required for the appli-ance.

Over-and-under and side-by-side installation
If you want to install 2 refrigerating appliances one over the other or side by side, you must maintain a clearance of at least 150 mm between the appliances. Selected appliances can be installed without a minimum clear-ance. Ask your dealer or kitchen planner about this.

Installing the appliance

WARNING

Risk of electric shock!
Liquid in the control elements may be dangerous.

• Always install the enclosed niche cover under the enclosed installation instructions.
• Install the appliance under the enclosed installation instructions.

Preparing the appliance for the first time

1. Remove the informative material.
2. Remove the protective foil and transit bolts, e.g. remove the adhesive strips and carton.
3. Clean the appliance for the first time.

Connecting the appliance to the electricity supply

1. Insert the non-heating appliance plug of the power cable into the appliance.
2. Insert the mains plug of the appliance’s power cable in a socket nearby. The connection data of the appli-ance can be found on the rating plate. → “Appliance”, Fig. 1 /4.
3. Check the mains plug is inserted properly.
   • The temperature display shows an animation and the control panel is locked.
   • The appliance is ready to use once the animation has ended and an LED lights up for the temperature display.

Familiarising yourself with your appliance

Appliance
You can find an overview of the parts of your appliance here.

Note:
Deviations between your appliance and the diagrams may differ about their features and size.

• A. Refrigerator compartment
• B. Floor area

1. Control panel
2. Lighting
3. Storage container
4. Rating plate
5. Exterior ventilation grille
6. Variable door rack
7. Door rack for large bottles

Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

1. switches the connection to the WLAN home network (Wi-Fi) on or off.
2. lights up if user-defined settings have been set via the Home Connect app. You can find more information in the Home Connect app.
3. sets the temperature of the refrigerator compartment.
4. lights up when the alarm is switched on.
5. lights up when Fast cooling is switched on.
6. Displays the set temperature for the refrigerator compartment in °C.
7. switches the appliance on or off.

Features

The features of your appliance depend on the model.

Shelf
To vary the shelf as required, you can remove the shelf and re-insert it elsewhere.

Storage container
The temperatures in the storage container are lower than in the refrigerator compartment. Temperatures below 0 °C may occur occasionally. To reach temperatures close to 0 °C in the storage container, set the refrigerator compartment temperature to 2 °C. Use the lower temperatures in the storage container to store highly perishable food, e.g. fish, meat, and sausages.

Door rack
To adjust the door rack as required, you can remove the door rack and re- insert it elsewhere.

Variable door rack
To adjust the variable door rack as required, you can move or remove the variable door rack, and re-insert it elsewhere.

You can remove the door rack rail and re-insert it elsewhere. “Removing the door rack rail”.

Accessories

• Use original accessories. These have been made especially for your appli-ance.
• The accessories for your appliance depend on the model.

Egg tray
Store eggs safely on the egg tray.

Ice cube tray
Use the ice cube tray to make ice cubes.

Making ice cubes
Use only drinking water to make ice cubes.

1. Fill the ice cube tray with drinking water up to ¾ and place in the freezer compartment. If the ice cube tray is stuck to the freezer compartment, loosen it with a blunt object such as the handle of a wooden spoon.
2. To loosen the ice cubes, twist the ice cube tray slightly or hold it briefly under flowing water.

Basic operation

Switching on the appliance

1. Electrically connect the appliance.
   Note: If the appliance has been previously switched off using the control panel, press and hold for three seconds.

   • The temperature display shows an animation and the control panel is locked.
   • The appliance is ready to use once the animation has ended and an LED lights up for the temperature display.
   • The appliance begins to cool.

2. Set the required temperature.

Operating tips

1. Once you have switched on the appliance, the set temperature is only reached after several hours. Do not put any food in the appliance until the set temperature has been reached.
2. When you close the door, a vacuum may be created. The door is then difficult to open again. Wait a moment until the vacuum is offset.
3. The temperature in the appliance varies due to the following conditions:
   • How often the appliance is opened
   • Load Capacity
   • Temperature of newly stored food
   • Ambient temperature
   • Direct sunlight

Switching off the appliance

• Press and hold for three seconds.

Setting the temperature
Setting the refrigerator compartment temperature

• Press repeatedly until the temperature display shows the required temperature setting.
• The recommended temperature in the refrigerator compartment is 4 °C. → “OK” sticker”.

Additional functions

Find out which additional functions can be used for your appliance. Additional functions can be set via the Home Connect app.

Fast cooling

• With Fast cooling, the refrigerator compartment cools as cold as pos-sible.
• Switch on Fast cooling before placing large quantities of food in the refrigerator compartment.
• Note:  When Fast cooling is switched on, increased noise may occur.

Switching on Fast cooling

• Press repeatedly until lights up.

Note:
After approx. 6 hours, the appliance switches to normal operation.

Switching off Fast cooling
Press repeatedly until the temperature display shows the required temperature.

Rest mode
To ensure that you can also use the appliance on the Sabbath, the Rest mode switches off all non-essential functions.

During Rest mode, the following functions are switched off:

• Fast cooling
• Alarm
• Interior lighting
• Audible signals
• Messages on the control panel

Note:
The brightness of the control panel lighting is reduced during the Rest mode.

Switching on Rest mode

• Press and hold for 15 seconds until an audible signal sounds.
• lights up.

Note:
After approx. 80 hours, the appliance switches to normal mode.

Switching off Rest mode

• Press and hold for 15 seconds until an audible signal sounds.

Alarm

Door alarm

• If the appliance door is open for a while, the door alarm switches on. A warning tone sounds and lights up.
• After 10 minutes, the interior lighting flashes.

Switching off the door alarm

• Close the appliance door or press .
• The warning tone is switched off.

Home Connect

• This appliance is network-capable. Connect your appliance to a mobile device to control its functions via the Home Connect app.
• The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of
• Home Connect services in your country. You can find information about this at: www.home-connect.com.
• To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi-Fi1) and to the Home Connect app. After switching on the appliance, wait at least 2 minutes until internal device initialization is complete. Only then should you set up Home Connect.
• The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings.

Tip:  Please also follow the instruc-tions in the Home Connect app.

Notes

• Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appli-ance via the Home Connect app.
• Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app.

Setting up the Home Connect app

1. Install the Home Connect app on your mobile device.
2. Start the Home Connect app and set up access for Home Connect. The Home Connect app guides you through the entire login process.

Setting up Home Connect

Requirements

• The Home Connect app has been installed on your mobile device.
• The appliance is receiving signals from the WLAN home network (Wi-Fi) at its installation location.

1. Open the Home Connect app and scan the following QR code.
2. Follow the instructions in the Home Connect app.

• Switching on the connection to the WLAN home network (Wi-Fi)
• Press .

Switching off the connection to the WLAN home network (Wi-Fi)

• Press .

Installing updates for the Home Connect software

Note:
If an update of the Home Connect software is available, a message appears in the Home Connect app.

• To install the update for the Home Connect software, follow the instructions in the Home Connect app.
• The control panel is partially locked during the installation.

Resetting Home Connect settings
If your appliance experiences connection problems with the WLAN home network (Wi-Fi) or your appliance wants to log into a different WLAN home network (Wi- Fi), you can reset the Home Connect settings.

• Press and hold for six seconds until goes out.
• The Home Connect settings have been reset.

Data protection
Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration):

• Unique appliance identification (consisting of appliance codes as well as the MAC address of the Wi-Fi communication module installed).
• Security certificate of the Wi-Fi communication module (to ensure a secure data connection).
• The current software and hardware version of your appliance.
• Status of any previous reset to factory settings.

This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time.

Note:
Please note that the Home Connect functions can only be utilized with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.

Refrigerator compartment

• You can keep meat, sausage, fish, dairy products, eggs, prepared meals, and pastries in the refrigerator com-partment.
• The temperature can be set from 2 °C to 6 °C.
• The refrigerator compartment can also be used to store highly perishable foods in the short to medium term. The lower the selected temperature, the longer the food remains fresh.

Tips for storing food in the refrigerator compartment

• Only store food when fresh and undamaged.
• Store food covered or in air-tight packaging.
• To avoid impeding the circulation of air and to prevent food from freezing, do not place food so that it has direct contact with the back wall.
• Allow hot food and drinks to cool down first before placing in the appliance.
• Observe the best-before date or use-by date specified by the manufacturer.

Chill zones in the refrigerator compartment
The air circulation in the refrigerator compartment creates different chill zones.

Coldest zone
The coldest zone is in the storage container.

Tip:
Store highly perishable food such as fish, sausages, and meat in the coldest zone.

Warmest zone
The warmest zone is at the very top of the door.

Tip:
Store food that does not spoil easily in the warmest zone, e.g. hard cheese and butter. Cheese can then continue to release its aroma and the butter will still be easy to spread.

“OK” sticker

• The “OK” sticker lets you check whether the refrigerator compartment reaches the safe temperature range of +4 °C or colder recommended for food.

• The “OK” sticker is not included with all models.

• If the sticker does not indicate “OK”, gradually reduce the temperature.

• “Setting the refrigerator compartment temperature”.

• Once the appliance is switched on, it may take up to 12 hours until the set temperature is reached.
  OK

• Correct setting

Floor area

• You can store the same type of food in the floor area as you can in the re-frigerator compartment.
• The temperature in the floor area matches the temperature in the rest of the refrigerator compartment.

Storing food in the floor area

• To store food in the floor area, slide the cover backward over the floor area.

Defrosting

Defrosting in the refrigerator compartment

• When the appliance is operating, condensation droplets or frost form on the rear panel of the refrigerator compartment due to functional reasons. The back panel in the refrigerator compartment defrosts automatically.
• Condensation runs through the condensation channel into the drainage hole to the evaporation pan and does not have to be wiped away.
• To ensure that the condensation can drain and odors do not form, observe the following information: Cleaning the condensation channel and drainage hole.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully. Customer Service must clean inaccessible points. Cleaning by customer service can give rise to costs.

Preparing the appliance for cleaning

1. Switch off the appliance.
2. Disconnect the appliance from the power supply. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box.
3. Take out all of the food and store it in a cool place. Place ice packs (if available) onto the food.
4. If there is a layer of hoarfrost, allow this to defrost.
5. Remove all fittings and accessories from the appliance.
6. Remove the door rack rail.

Cleaning the appliance

WARNING

Risk of electric shock!
An ingress of moisture can cause an electric shock.

• Do not use steam- or high-pres-sure cleaners to clean the appli-ance. Liquid in the lighting or in the controls can be dangerous.
• The rinsing water must not drip into the lighting or controls.

ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appli-ance.

• Do not use hard scouring pads or cleaning sponges.
• Do not use harsh or abrasive detergents.
• Do not use cleaning products with a high alcohol content.
• If liquid gets into the drainage hole, the evaporation pan may overflow.
• The rinsing water must not get into the drainage hole.
• If you clean fittings and accessories in the dishwasher, this may cause them to become deformed or discolored.
• Never clean fittings and accessories in the dishwasher.

1. Prepare the appliance for cleaning.
2. Clean the appliance, the fittings, the accessories, and the door seals with a dishcloth, lukewarm water, and a little pH-neutral washing-up liquid.
3. Dry thoroughly with a soft, dry cloth.
4. Insert the fittings and install the appliance components.
5. Electrically connect the appliance.
6. Putting the food into the appliance.

Cleaning the condensation channel and drainage hole
Regularly clean the condensation channel and drainage hole to ensure that the condensation can drain.

1. Remove the storage container.
2. Carefully clean the condensation channel and the drainage hole, e. g. using a cotton bud.

Removing the fittings
If you want to clean the fittings thoroughly, remove them from your appliance.

Removing the shelf

• Lift the shelf at the front 1, pull it out, and remove it 2.

Removing door rack
Lift the door rack and remove it.

Removing the storage container

1. Pull out the storage container as far as it will go.
2. Lift the storage container at the front 1 and remove it ⁠2.

Removing appliance components
If you want to clean your appliance thoroughly, you can remove certain components from your appliance.

Removing the door rack rail

• Lift the door rack rail upwards and remove it.

Removing the cover over the floor area

1. Remove the door rack for large bottles.
2. Pull out the cover as far as it will go over the floor area, 1, lift it over the end stop 2, and swivel it downwards and out 3.

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.

WARNING

Risk of electric shock!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.

mode is switched on.

▶ Carry out the appliance self-test.

” Once the appliance self-test has ended, the appliance switches to normal operation.

The LED lighting does not work.| Different causes are possible.

▶ Call customer service.

The customer service number can be found in the enclosed customer service directory.

Home Connect is not working properly.| Different causes are possible.

▶ Go to www.home-connect.com.

The warning tone sounds.

The door alarm is switched on.

| The appliance door is open.

▶ Close the appliance door.

The temperature differs greatly from the setting.| Different causes are possible.

1. Switch off the appliance.

2. Switch the appliance back on after five minutes.

‒ If the temperature is too warm, check the temperature again after a couple of hours.

‒ If the temperature is too cold, check the temperature again on the following day.

The base of the refrigerator compartment is wet.| The condensation channel or drainage hole is blocked.

▶ Clean the condensation channel and the drainage hole.

Storage and disposal

Taking the appliance out of operation

1. Switch off the appliance.
2. Disconnect the appliance from the power supply. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box.
3. Remove all of the food.
4. Defrost the appliance.
5. Clean the appliance.
6. To guarantee the ventilation inside the appliance, leave the appliance open.

Disposing of old appliance
Valuable raw materials can be reused by recycling.

WARNING

Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at risk.

• Leave shelves and containers inside the appliance to prevent children from climbing in.
• Keep children away from the redundant appliance.

WARNING

Risk of fire!
If the tubes are damaged, flammable refrigerant and harmful gases may escape and ignite.

• Do not damage the tubes of the refrigerant circuit or the insulation.

1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally friendly manner. Information about current disposal methods is available from your specialist dealer or local authority.

This appliance is labeled under European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

• Detailed information on the warranty period and terms of the warranty in your country is available from our after-sales service, your retailer, or on our website.
• If you contact Customer Service, you will require the product number (E-Nr.), the production number (FD), and the consecutive numbering (Z-Nr.) of your appliance.
• The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

Product number (E-Nr.), production number (FD), and consecutive numbering (Z-Nr.)

• You can find the product number (E-Nr.), the production number (FD), and the consecutive numbering (Z-Nr.) on the appliance’s rating plate.
• “Appliance”, Fig. 1 /4, Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Technical data

Refrigerant, cubic capacity, and further technical specifications can be found on the rating plate.

Information regarding Free and Open Source Software

• This product includes software components that are licensed by the copyright holders as free or open-source software.
• The applicable license information is stored on your home appliance. You can also access the applicable license information via your
• Home Connect app: “Profile -> Legal information -> Licence Information”.1 You can download the license information on the brand product website. (Please search on the product website for your appliance model and additional documents). Alternatively, you can request the relevant information from ossrequest@bshg.com or BSH Hausger-äte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany.
• The source code will be made available to you on request.
• Please send your request to oss-request@bshg.com or BSH Hausger-äte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany.
• Subject: „OSSREQUEST“
• The cost of performing your request will be charged to you. This offer is valid for three years from the date of purchase or at least as long as we offer support and spare parts for the relevant appliance.

Declaration of Conformity

• BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provisions of Directive 2014/53/EU.
• A detailed RED Declaration of Conformity can be found online at www.gaggenau.com among the additional documents on the product page for your appliance.
• 2.4 GHz band (2400–2483.5 MHz): Max. 100 mW
• 5-GHz band (5150–5350 MHz + 5470–5725 MHz): max. 150 mW

BSH Hausgeräte GmbH

• Carl-Wery-Straße 34 81739 München, GERMANY.
• www.gaggenau.com.

References

• Select your region | Gaggenau
• Connect your household | Home Connect

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>