COMBO Mouse Pad Pro Wireless Charging Mouse Pad and Wireless Mouse User Manual

: June 5, 2024
: COMBO

Table of Contents

PRESENTATION OF PRODUCT:
INSTRUCTIONS:
LED light status of the mousepad:
Mouse pad technical specifications:
RECOMMENDATIONS:
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

USER MANUAL
Wireless charging mouse pad and wireless mouse

PRESENTATION OF PRODUCT:

Right button
Scroll
Leff button
Button for DPI settings
USB to Type-C cable
Loading zone g.
Led lights
USB to micro-USB cable
Micro-USB mouse connector
USB mouse receiver

INSTRUCTIONS:

Connect the mouse pad to a USB port on your computer or to a power adapter with a USB port with 2A that we recommend using for the maximum charging efficiency of your device (this one is not included in the pack) with the USB to the type-C cable provided in the kit.
Connect the USB mouse signal receiver (1o) to a USB port on your computer. Switch on the mouse from the bottom and it will be ready to use.
This mouse has an internal rechargeable battery (not removable) with 300 mAh that can be charged in 2 ways: A) by Placing the mouse over the charging area on the mouse pad (((C) (7) taking care that the symbols are perfectly overlapping. When the alignment is correct the lights blue and green will appear on the mouse scroll key (2) and it will start charging. B) Using the USB to micro-USB cable included (6) plugged on one side to the mouse connector (8) and on the other into the computer USB port or to a power adapter in the power grid.

LED light status of the mousepad:

When the mouse pad is connected to the USB port of your computer with the USB to Type-C cable included or to a power adapter with a USB port with 2A, the 2 led lights near the connector (g) will appear green and red, flashing alternatively for 1-2 seconds. Afterward, the mouse pad will be in standby and the green lights will be always on. When an enabled device for the wireless charger will be placed on the dedicated area for the wireless charge on the mouse pad marked with the symbol C:t:r ,the green lights will start flashing, meaning the charging activity has started. In case of errors resulting from external objects placed on the charging area of the mouse pad ((:0, the lights will be red and flashing. It is necessary to remove the objects.
In case of overtemperature, the lights will be red and flashing alternatively and the product will enter in a protection state as long as it is necessary.

Mouse pad technical specifications:

Dimensions: 324mm’244mmtmm
Weight: 214 G
Load distance: 8 mm
Loading area: diameter 5 cm
Input power consumption: DC 5V 2A, DC gV 2A
Output energy consumption: DC 5V IA. DC gV
Nominal power: 5W/7.5WhoW

Compatible with Android and iOS Smartphones that support the wireless charge.
It is important for an efficient and correct charge of your mobile phone to check carefully that your Smartphone is inside and aligned with the recharging wireless area marked with the symbol on the mouse pad. Mouse technical specifications: Dimensions: 115mm”62mm’32mm Weight: 76 G Mouse type: wireless Material: plastic Resolution: 800/1200/1600 DPI Power consumption of the mouse: DC 37V 2omA Power consumption of the receiver: 5V loom Battery capacity: 3o0mAh Buttons: 5 buttons + scroll Compatibility: Win XP, Vista, 7, 8, 8.1 or above aligned with the recharging wireless area marked with the symbol on the mouse pad. Mouse technical specifications: Dimensions: 115mm”62mm’32mm Weight: 76 G Mouse type: wireless Material: plastic Resolution: 800/1200/1600 DPI Power consumption of the mouse: DC 37V 2omA Power consumption of the receiver: 5V room Battery capacity: 3o0mAh Buttons: 5 buttons + scroll Compatibility: Win XP, Vista, 7, 8, Si or above

RECOMMENDATIONS:

Read these safety instructions before using your device and store them for possible future reference. If the charger cord is damaged, have it repaired by the manufacturer, its service or a similarly qualified person in order to avoid any hazard. The power supply must be replaced by a new one in case of malfunction because this power supply is not repairable. Do not disassemble the charging device. Do not expose the device to moisture, water and rain. Do not open. repair or immerse in liquids or expose to heat. Do not insert any object into the pores or openings of the device. Do not use the device if it has been damaged. Do not use in environments where the temperature is very high. Keep out of reach of children.

To reduce the risk of electric shock, unplug the device from any power source before attempting any maintenance or cleaning. To achieve an optimal electromagnetic transfer efficiency, we recommend connecting the mouse pad to a power adapter that complies with the electrical characteristics of the mouse pad C5V 2A).

2 years warranty
Imported and distributed by Axoteam Srl via Malborghetto. 28 – 33100 Udine CUD) ITALY VAT IT 02515090302 – info@blindbarber.net
MADE IN CHINA