HUTAKUZE Smart LED Recessed Lighting 6-Inch WiFi+BLE Mode Downlight User Manual

HUTAKUZE Smart LED Recessed Lighting 6-Inch WiFi+BLE Mode Downlight

Install

1.  Before installing the smart light, make sure you have a router which can access to the internet successfully, the WiFi router must switch to 2.4Ghz mode. Please turn on WiFi and Bluetooth on your phone or tablet.
2.  There are three methods to connect, EZ mode(Default), AP mode and Bluetooth. It is usually successful to follow the EZ mode with the help of enable device’s Bluetooth function.
3.  If not, then try the AP mode.
   Default mode: Wifi Quick pairing with help of Bluetooth

Step1: Download the smart life app?.

Android devices scan the QR code and download smart life app.IOS search ‘smart life’ in app store.
Install APP and Register an account.

Step2: How to make the light blink rapidly?

1.  Power on the light(>10s)
2.  Power off(>2s)->Turn on(<1s)->off(>2s)->on(<1s)->off (>2s)->on (Wait for 5S)
3.  Then the light will rapidly flash (On and off twice per second)
4.  If not,please try again, go on step 2 as long as the light is quickly flashing.

Step3: How to add the smart light in the app?

1. App installed devices connect to Wi-Fi and enable the bluetooth and location permissions.
2.  When the light is in pairing status (quick flashing)， click“+”on the top right corner of smart life app，tap in order‘Add Manually->Lighting->Light Source (BLE+Wi-Fi).
3.  Make sure the light is quick flashing. Choose the local WiFi and enter WiFi password, click ‘Next’, then add the light accordingly.
4.  You can rename the device as you want and control it on the app.

AP mode:
Set App to pairing status, please choose ‘AP mode’ on the top right corner.

Follow the prompts:

1.  Power on light(>10s)
2.  Power off(>2s)->Turn on(<1s)->off(>2s)->on(<1s)->off(>2s) –> on, after the flash is quickly flashing(Light on and off twice per second), the continue, power off(>2s)->Turn on(<1s)->off (>2s)->on(<1s)->off(>2s)–> on (Wait for5S)
3.  Then the light is slowly flashing (Light on and off once per second).

Bluetooth connection:

1.  Make sure your mobile phone/tablet has connected to a 2.4 Ghz WIFI router and the device’s bluetooth is enabled.
2.  Make sure the light is flickering.
3.  When you open the ‘Smart Life’ app, the ‘adding device window will pop up , add the device accordingly.
4.  If the device adding window does not pop up, click the ‘+’ on the top right corner of the App to add the device.

FAQs

Q: How to investigate problems if i can not connect the smart light?

• A. Please check if the light is powered on properly.
• B. Check if the phone is connected to WIFI and if your light is connected to the same WIFI as your phone.
• C. Ensure the WIFI can access to internet,and only 2.4g WIFI is supported.
• D. Check if the light is rapidly flashing(on 0.5s and off 0.5s) Before you start step3.
• E. Make sure the WiFi password enter in App is correct when adding device.
• F. Please do not use light outside WiFi range and metal container where can block WIFI signals.

Q:How to reset the light?

• A. If the light doesn’t have installed. Turn on(<1s)—>off (>2s)—>on(<1s)—>off(>2s)—->on(Wait for 5S) And then the light will rapidly flash(2 times per second).
• B. If the light have installed.In the page“device details”click“ remove device”after 5 seconds the light will flash.

How to connect smart light to Amazon ALexa

1.  You can learn the detailed instruction on “me->More Services”Page of”Smart life”APP.
2.  In the Third -party Access Service,Tap the Alexa.
3.  Tap“link with Account password”
4.  there are detailed connection course.

How to connect smart light to Google Assistant

1.  You can learn the detailed instruction on “me->More Services”Page of”Smart life”APP.
2.  In the Third -party Access Service,Tap the Google Assistant, Tap the“View more ways to link”.
3.  Tap“link with Account password”
4.  There are detailed connection course.

Instructions

The product has two years’ warranty under the condition that all the operations are strictly followed as per the instructions. And the following situations are not covered for the warranty:

1.  Any alterations cut or illegible handwriting on the purchase tags or product instructions.
2.  Malfunction caused by damage,incorrect connection or misusage.
3.  Adverse phenomena caused by extreme environment rather than the inherent causes of this product (e.g. lighting,flood,fire,etc)
4.  The product shell has been opened or disassembled.
5.  Improper use, maintenance and storage caused by non-conformity with product specifications (such as moisture and corrosion).
6.  Product appearance deformation, damage or any other physical damage caused by external forces.

Warning

1.  The light is limited to indoor use only, do not use in humid and high-temperature environments.
2.  Do not touch the product when it is working due to the potential high temperature.
3.  Do not use the product in the confined space of metal materials. otherwise, it can not be connected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>