LARRY VS HARRY WLH5917H Damper Kit Instruction Manual

June 5, 2024
LARRY VS HARRY

LARRY logo

Damper Kit
Attachment ManualLARRY VS HARRY WLH5917H Damper
Kit

Before you start

Things you need before attaching the Damper Kit

LARRY VS HARRY WLH5917H Damper Kit - fig15

The Damper Kit is maintenance-free!

Tools you need

Find your tools and get ready!

LARRY VS HARRY WLH5917H Damper Kit - fig1

If you have the Honeycomb Board or Sidepanel Kit installed, you might also need:
LARRY VS HARRY WLH5917H Damper Kit - fig2Icons that will appear throughout the guide:

Grease.
Remember to grease or else your mechanic will hate you later on. (“Much-off” has a Bio Grease that cares about the environment)
LARRY VS HARRY WLH5917H Damper Kit - fig4Note!
Important message from Larry the King.

Components

LARRY VS HARRY WLH5917H Damper Kit - fig5

What’s in the box?

The Damper

LARRY VS HARRY WLH5917H Damper Kit - box

Step 1
A small tip before attaching the Damper Kit
If you have mounted any other accessories -other than the Honeycomb Board- these need to be dismounted first!

LARRY VS HARRY WLH5917H Damper Kit - fig5

LARRY VS HARRY WLH5917H Damper Kit - fig6

1 First, remove the reflector and/ or front light. The Original Bullitt comes as standard with a reflectorthe eBullitt, a front light.| 2 Remove the bolts and lift up the mudguard a bit.
LARRY VS HARRY WLH5917H Damper Kit - fig7

3 NOTE! Are the fittings of the mudguard mounted on the backside, it needs to be mounted on the front side.| 4 Tighten the bolts on the Damper, if they are a bit lose

Step 2
Placing and attachment of the Damper Kit

LARRY VS HARRY WLH5917H Damper Kit - fig8

LARRY VS HARRY WLH5917H Damper Kit - fig4NOTE:
We recommend removing the reflector (of the Original Bullitt) as it’s made of plastic and can break. Place it possibly somewhere else.

LARRY VS HARRY WLH5917H Damper Kit - fig9

1 Grease the bolt (C) or (D). Loosely tighten the bolt into the Damper bracket with the Allen Key.| 2 Grease the bolt (A) or (B). Mount it from the back (possibly through the Honeycomb Board) into the Damper bracket.
LARRY VS HARRY WLH5917H Damper Kit - fig10

3 Mount the front light back on and make sure to place the fittings of the mudguard on the front side.| 4 Now check that the Damper runs smoothly through it’s travel with some resistance.

Step 3
Adjusting the Damper Kit

LARRY VS HARRY WLH5917H Damper Kit - fig13

LARRY VS HARRY WLH5917H Damper Kit - fig11

1 Adjust Bumper 1. Turn the handlebar to the right: Make sure the Damper does not hit the front fork legs. Adjust the Bracket with 4mm Allen Key.| 2 Adjust Bumper 2. Turn the handlebar all the way to the left and fine tune the distance between the wheel and the front fork so they do not touch.

3 Adjust the Resistance:  Seven settings – The resistance level is a personal preference.

Bullitt Copenhagen
Frederiksborggade 43, DK–1371 Copenhagen, Denmark
www.larryvsharry.com
All rights reserved © 2022 Larry vs Harry
Ver.No.: 01, 12-2021

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals