Lowell CB86-SGVPO Vandal Resistant Enclosure Owner’s Manual
- June 3, 2024
- Lowell
Table of Contents
Lowell CB86-SGVPO Vandal Resistant Enclosure
INTRODUCTION
Surface-mount galvanized steel enclosure for ceiling or wall installation is designed to screw-mount a grille (Lowell model VRG-8) with an 8″ loudspeaker in vandalprone areas or where tampering is a concern. The box can be mounted in protected outdoor areas* when used with a moisture-resistant speaker. Order grille and speaker separately.
FEATURES
-
Construction: 16-gauge galvanized steel with white powder epoxy finish. Welded seams.
-
Length x Width: 11.5″ x 11.5″
-
Depth: 6″D
-
Volume: 0.459 cu.ft.
-
Acoustic Treatment: 1″ thick acoustic batting (yellow fiberglass)
-
Installation & Knockouts:
- Rear hole (0.875″ dia.) for 1/2″ conduit
- Universal mounting pattern in rear for installation to 4″square, 4″octagon, 1-gang or the 2-gang electrical box (not included).
- Front-formed flanges with rust-resistant 8-32 stainless steel press nuts will accept a screw-mount grille.
-
Country of Origin: Made in U.S.A.
-
A &E Specifications: The rust- and vandal-resistant surface-mount enclosure for 8″ speakers shall be Lowell model CB86-SGVPO, which shall be galvanized steel with white powder epoxy finish measuring 11.5″ square x 6″D. It shall feature a rear hole (.875 dia.) for 1/2″ conduit or wire access and provisions to mount to an electrical box (4″ square, 4″ octagon, 1-gang, or 2-gang – not included). It shall also feature four mounting holes and 8-32 stainless steel press nuts to accept the specified screw-mount grille. The enclosure shall include 1″ thick acoustic batting. It can be mounted in protected outdoor areas when used with a moisture-resistant speaker.
COMPATIBLE COMPONENTS (order separately)
- Speakers: 8″ E.I.A. moisture-resistant speakers
- Grille (screw-mount): VRG-8
DIMENSION
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>