ACEFAST B7 Digital Display 45w(Usb-A+Usb-A) Dual Port Car Charger User Guide
- June 5, 2024
- ACEFAST
Table of Contents
ACEFAST B7 Digital Display 45w(Usb-A+Usb-A) Dual Port Car
Charger
Product Diagram
Package Contents
B7 digital display 45W(USB-A+USB-A) dual port car charger
User Manual
Thank you for purchasing the B7 digital display 45W(USB-A+USB-A) dual port car
charger.
Please read this user manual carefully and keep it for future reference. If
you need any assistance, please contact our support team with your product
model number and Amazon order number.
Specifications
| Total Wattage | 45W Max |
|---|---|
| Input | DC12-24V |
| Output USB-A1 | 4.5V 5A 5V 4.5A 5V 3.6A 9V 2.5A |
12V 2.25A(27W Max)
Output USB-A2| 5V 3.4A 9V 2A 12V 1.5A(18W Max)
Output USB-A1+USB-A2| 27W+18W Max
Getting Started
- A charging cable that meets the fast charging protocol needs must be used to realize the fast charging function.
- To protect your device, please disconnect the device after full charge.
- Please unplug the charger from the socket when you are not using the charger or starting the engine.
- To ensure durability, do not shake the charger when it is plugged into the vehicle’s DC power socket.
LED display description.
- The battery voltage is displayed for 10 seconds when it is turned on. It will flash when the battery voltage is abnormal, and it will not flash when the battery voltage is normal.
- The cell phone is not connected for charging – the car battery voltage is displayed.
- When the mobile phone is connected for charging, the charging current of the mobile phone is displayed.
The display screen shows: the voltage and current parameter error displayed on the display screen is ＜5%.
Please read all instructions and warnings before using this product. Improper use will cause damage to the product.
- Do not store this product under high temperature, strong light and strong magnetic environment, do not place it in other harsh environments such as fire source to avoid heat, combustion or electrical shock.
- When over-voltage, over-current, or over-temperature occurs during charging, the charger will automatically stop charging to avoid damage. When returning to the normal state, charging will continue.
- Do not disassemble, repair or modify this device by yourself.
- Do not touch the charger with wet hands or immerse it in water or other liquids.
- Do not use the charger for products higher than the output range of this product to avoid electrical shock, burning or damage to the device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>