Heckler H583 – ADA Camera Mount for Huddly GO & Huddly IQ User Guide
- June 5, 2024
- Heckler
Table of Contents
Heckler H583 – ADA Camera Mount for Huddly GO & Huddly IQ
IN THE BOX
- A: 1 x ADA Camera Mount
- B: 1 x Wall Achor
- C: 1 x Hex Key, 5/32”
- D: 1 x Mounting Screw
TOOLS NEEDED
COMPONENTS NEEDED (Not Included)
If you have any questions, please contact service@hecklerdesign.com.
STEP 1
Locate mounting position
STEP 2
Install the wall anchor
Optional
Mark and drill the hole
Important: Drill a 1/2-inch hole for the cable to pass through the wall.
Optional
Route the USB-C cable through the wall
STEP 3
Fasten the ADA Camera Mount
STEP 4
Install the Huddly GO or Huddly IQ
- Connect the USB-C cable to Huddly GO or Huddly IQ Camera.
- Fasten the camera to the ADA Camera Mount with the hex key.
STEP 5
Adjust and set camera orientation.
Loosen the screw with the hex hey to adjust camera orientation, and then tighten it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>