Kidde FX340SC Fire Extinguisher Instructions
- June 5, 2024
- Kidde
Table of Contents
Kidde FX340SC
Fire Extinguisher
How To Use Your
Kidde Extinguisher
Follow the instructions shown on the front label of your fire extinguisher.
After the fire is out, clean up dry chemical powder immediately to avoid
corrosion.
CAUTION: Under certain fire and heat conditions, the dry chemical powder
in ABC-type extinguishers will cause damage or prove extremely difficult to
remove from oven surfaces, including self-cleaning models. Do not use the
self-cleaning feature to remove ABC Powder. BC-type extinguishers are
recommended for cooking areas.
CAUTION: The agent contained in this extinguisher is not toxic, but may
cause skin irritation. Avoid inhaling the dry chemical agent. In case of
contact, flush the affected area with clean, cool water. If irritation
persists, contact a physician immediately. The chemical name of agent is
printed on the extinguisher label.
For more information on fire fighting, contact your local fire department or
the U.S. Coast Guard. Additional information on extinguishers can be found in
the National Fire Protection Association (NFPA) pamphlet No. 10, “Portable
Fire Extinguishers.”
Mounting Your Extinguisher
Please follow the instructions and dia-grams below for mounting the bracket
that was supplied with your fire extin-guisher. The hanger or bracket provided
with the extinguisher must be used. Use of an existing hanger or bracket may
not properly support or retain the extinguisher. U.S. Coast Guard approval is
valid only with the marine mounting bracket specied on the instruction label
of your extinguisher.
Plastic Strap Bracket Instructions
- Fasten bracket to wall with appropriate fasteners (not included).
- Place extinguisher into bracket. Buckle straps together to lock in place.
IF YOUR EXTINGUISHER WAS SHIPPED WITH A PLASTIC BRACKET AND METAL STRAP then mount your extinguisher as follows:
- Fasten bracket to suitable surface using a screw in the upper bracket mounting hole.
- Mount the metal strap provided with your extinguisher in the lower bracket mounting hole using another screw.
- Place extinguisher into bracket and latch the strap to hold the extinguisher securely in place.
IF YOUR EXTINGUISHER WAS SHIPPED WITH A HOSE AND HOSE STRAP, then slide
the hose strap over the bottom of the cylinder, and secure the nozzle end of
the hose to
the hose strap before placing your extinguisher in service.
.
Which Extinguisher To Use
There are two common types of fire extinguishers. Type ABC extinguishers fight
wood, paper, and cloth fires, plus flammable liquid and electrical fires. Type
BC extinguishers are for flammable liquids and electrical fires.
To determine which class or classes of fire your extinguisher is designed to
fight, locate the use code symbols on the front extinguisher label.
Using the wrong extinguisher on a fire could do more harm than good. Be sure
you understand which extinguisher is appropriate for each class of fire. For
protection against ALL COMMON CLASSES OF FIRES, you must choose a type ABC
extinguisher.
Inspection And Maintenance
To ensure that your fire extinguisher will be ready when needed:
- Read and follow all instructions on label and in owner’s manual.
- Inspect the extinguisher AT LEAST once a month – more frequently if exposed to weather or possible tampering.
- Check that extinguisher is charged. The pointer on pressure indicator MUST be in green section. If the pointer is in red or white section extinguisher is NOT ready for use.
- Be sure the lock pin is firmly in place.
- Keep the extinguisher clean. Check for dents, scratches, corrosion or any other damage.
- Check the discharge nozzle. Make sure it is clean and free of obstructions.
Remember the phrase PASS
The fire extinguisher is filled with a dry chemical agent. Examine the
extinguisher’s instruction label to determine the types of fire that can be
tackled with this extinguisher.
DO NOT TEST BY PARTIALLY DISCHARGING.
LOSS OF PRESSURE WILL OCCUR.
Six, Ten or Twelve-Year Limited Warranty (see below for 10 & 12-year
applicable models).
KIDDE will repair or replace this product to the original owner free of
charge, if defective in material or workmanship.
This warranty does not apply to damage resulting from accident, alteration,
abuse or failure to follow instructions supplied.
KIDDE, at its option, may refund the purchase price in lieu of replacement or
repair. ANY AND ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO A
PERIOD OF SIX (6) YEARS FROM
DATE OF PURCHASE. KIDDE, its dealers and distributors shall not be responsible
or in any way liable for any special or consequential damages for breach of
any warranty or implied warranty. This arranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
Ten (10)-Year Warranty applies only to these models: FX10K, FX110E, FX210R,
FX340SC-2, FX340GW-2. FX340H, FX340SW, FX340C. Twelve (12)-Year Warranty
applies only to this model:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>