5B28S8 Keypad for Ring Alarm Instructions

: June 5, 2024
: Ring

Table of Contents

5B28S8 Keypad for Ring Alarm
First, complete the in-app setup.
SAFETY INFORMATION
PRODUCT SPECIFICATIONS
Documents / Resources

5B28S8 Keypad for Ring Alarm

First, complete the in-app setup.

Make sure your Ring Alarm is disarmed.
In the Ring app, tap Set Up a Device and find the Keypad in the Security menu.
Follow the in-app instructions to complete setup.

Then, install the device in your home.

Choose a convenient location so you can arm and disarm easily as you come and go.
You can rest the Keypad on a flat surface or install it on a wall with the bracket and screws provided.
The Keypad works plugged in or running on the rechargeable battery. Charge the Keypad using the power adapter and USB cable provided.

Wall Mounting.

Place the mounting bracket on the wall, then use the wall anchors and screws from your kit to fasten the bracket to the wall (If using anchors, you should pre-drill holes).
Slide the Keypad onto the bracket. Screws: 3x 3x21mm. Anchors: 3x 5mm. If you’re planning to use the Keypad unplugged, you should fully charge it first.

SAFETY AND COMPLIANCE INFORMATION

Use Responsibly. Read all instructions and safety information before use.

SAFETY INFORMATION

WARNING!

Failure to read and follow these safety instructions before operation could result in fire, electric shock, or other injury or damage.

CAUTION!

To reduce the risk of electrical shock, DO NOT open the unit. There are no user serviceable parts inside the unit. Refer to customer support for any repair.

WATCH FOR SMALL PARTS!

Your device and accessories may present a choking hazard to small children. Keep them out of reach of small children.

Ring Keypad is for indoor use only. Do not expose your device to liquids. If your device or adapter gets wet, carefully unplug the device without getting your hands wet and wait for the device to dry completely before plugging it in again. Do not attempt to dry your device with an external heat source, such as a microwave oven or a hair dryer. If the device appear damaged, discontinue use immediately. To avoid risk of electric shock, do not touch your device during a lightning storm. When this device is plugged into an electrical socket-outlet, unplugging this device will disconnect it from the AC mains supply. Only plug this device into an easily accessible socket-outlet.

BATTERY SAFETY

HANDLE WITH CARE.Your device contains a rechargeable lithium- ion polymer battery and should be replaced only by a qualified service provider. Do not disassemble, open, crush, bend, deform, puncture, shred or attempt to access the battery in your device. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, expose to fire, explosion or other hazard. Only use the battery for the system for which it is specified. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage or other hazard. Do not short-circuit a battery or allow metallic conductive objects to come into contact with battery terminals. Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, do not attempt repair. Contact Ring Customer Service for assistance.

PRODUCT SPECIFICATIONS

Model Number: 5B28S8
Electrical Rating: 5.0V DC 1A
Adaptor Model: DSA-5PF19-05 050100
Adaptor made by: Dee Van Enterprise Co., Ltd.
Temperature Rating: 0°C – 40°C

DECLARATION OF CONFORMITY
Hereby, Ring LLC, declares that the radio equipment Ring Keypad (5B28S8) is in compliance with Directive 2014/53/EU and relevant UK statutory requirements. The full text of the EU Declarations of Conformity are available at the following internet address: ring.com/doc.pdf.

RADIO FREQUENCY COMPLIANCE
In order to protect human health, this device meets the thresholds for exposure of the general public to electromagnetic fields according to Council Recommendation 1999/519/EC. This device should be installed and operated with at least 20 cm between the radiator and your body.

Wireless Features: Z-Wave

Maximum Effective Radiated Power: 868.40 – 869.85 MHz 3.46 dBm ERP

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations.

MANUALS: Find online manuals at:ring.com/alarm-manual

WARRANTY: Find warranty information at: ring.com/warranty

Z-WAVE: For Z-Wave technical information, visit:ring.com/z-wave

ring.com/help

UK +44 1727 26 3045

EU +800 8700 9781

Saudi Arabia +80081 47867

UAE +80001 84084

South Africa +0800993700

Worldwide +1 310 929 7085

Documents / Resources

| ring 5B28S8 Keypad for Ring Alarm [pdf] Instructions
5B28S8, Keypad for Ring Alarm
---|---
| ring 5B28S8 Keypad for Ring Alarm [pdf] Instruction Manual
5B28S8 Keypad for Ring Alarm, 5B28S8, Keypad for Ring Alarm, Ring Alarm
| ring 5B28S8 Keypad For Ring Alarm [pdf] Instruction Manual
5B28S8 Keypad For Ring Alarm, 5B28S8, Keypad For Ring Alarm, Ring Alarm, Alarm