tc electronic MimiQ Doubler Pedal User Guide
- June 5, 2024
- tc electronic
Table of Contents
Quick Start Guide
MIMIQ DOUBLER
Visit musictribe.com to download the full manual
MIMIQ DOUBLER
Controls
- USB – Connects to your computer for firmware updates.
- Dubs – Selects the number of additional guitar layers that will be mixed with your original guitar signal.
- Effect – Adjusts the level of the overdubs.
- Level – Adjusts the level of the delay repeats.
- Outputs
- Footswitch – Power – Connect a 9 V / >100 mA power supply.
- Tightness – Controls the tightness of the simulated overdubs.
- Dry – Adjusts the level of the dry signal.
- Inputs
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
TC Electronic
MIMIQ DOUBLER
| Responsible Party Name: | Music Tribe Commercial NV Inc. |
|---|---|
| Address: | 122 E. 42nd St.1,8th Floor NY, NY 10168, |
United States
Email Address:| [email protected]
MIMIQ DOUBLER
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment. Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark UK Representative:
Music Tribe Brands UK Ltd.
Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom