ASUS SDRW-08V1M-U Optical Drives Installation Guide

June 5, 2024
Asus

ASUS SDRW-08V1M-U Optical Drives

ASUS-SDRW-08V1M-U-Optical-Drives-
PRODUCT

installing the external Optical Drive

  1. Open up the USB Type-C® cable compartment cover.
  2.  Pull out the USB Type-C® cable.
  3.  Connect the USB Type-C® cable to a USB Type-C® port on your computer.
  4.  (For Windows only) Press the Eject button to open the optical drive tray.

Packing up the USB Type-C® cable

  1. Push the section of the cable closest to the cable compartment in first, then gradually push the cable into the compartment.
  2.  Close up the USB Type-C® cable compartment cover.

Safety Guidelines

  •  Do not place damaged discs inside the device. A damaged disc may break while in use and damage the device.
  •  Use of any controls, adjustments, or procedures other than those specified in this manual may result to hazardous radiation exposure.
  •  Do not attempt to disassemble the drive.
  •  Do not move the device from a cold to a warm or hot environment. Drastic change in temperature is harmful to the device.
  •  Before moving or uninstalling the drive, remove any disc in it.
  •  Prevent liquids or any metal from getting into the device, If this situation occurs, contact your retailer for help.
  •  Do not use any evaporating solvents to clean the device. If you accidentally sprayed any solvent on the device, use a clean cloth to wipe it. You may also use a neutral leaner to dilute the solvent to easily wipe it from the device.
  •  Do not turn off the computer while the device is in reading or writing mode.
  •  Do not place discs into the device immediately if they came from a cold environment, especially during cold seasons. Wait until the discs have reached room temperature.
  •  Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).

Australia Statement Notice
From 1 January 2012 updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details please visit http://support.asus.com. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http://support.asus.com.
Declaration of compliance for product environmental regulation
ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/Compliance.htm for information disclosure based on regulation requirements ASUS is complied with:

EU REACH and Article 33
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.Die rechtliche Rahmenbedingungen für REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) erfüllend, veröffentlichen wir die chemischen Substanzen in unseren Produkten auf unserer ASUS REACH-Webseite unter http://csr.asus. com/english/REACH.htm.

EU RoHS
This product complies with the EU RoHS Directive. For more details, see http://csr.asus.com/english/article.aspx?id=35

India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers(PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule. Compliance Statement of Innovation, Science and Economic Development Canada

(ISED)
This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B)/NMB-003(B)

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals