ASUS Q19270 Optical Gaming Mouse User Guide

June 5, 2024
Asus

ASUS Q19270 Optical Gaming Mouse User Guide
ASUS Q19270 Optical Gaming Mouse

Mouse features

Mouse features

  1. Right-click button
  2. Scroll wheel
  3. Forward button
  4. Backward button
  5. Left-click button
  6. USB 2.0 connector
  7. Mouse feet
  8. Rubber feet
  9. DPI button
  10. Optical sensor

Replacing the switches

Replacing the switches

Package contents

  • STRIX Impact II Moonlight White Gaming Mouse
  • User documentation
  • Warranty card

Specifications

Resolution 200 DPI to 6200 DPI
DPI 1 400 DPI
DPI 2 800 DPI
DPI 3 (Default) 1600 DPI
DPI 4 3200 DPI

You may customize the DPI settings for DPI 1-4 through Armoury Crate. DPI settings range between 200 to 6200 DPI.

System requirements

  • Windows® 10
  • 100 MB of hard disk space (for optional software installation)
  • Internet connection (for downloading optional software)
  • USB PORT

Getting started

To set up your STRIX Impact II Moonlight White Gaming Mouse: 1. Connect the USB cable to your computer’s USB port. 2. Download the driver from https://rog.asus.com then install it in your computer.

Customizing with Armoury Crate

For more programmable buttons, performance settings, lighting effects, download and install the Armoury Crate from https://rog.asus.com.

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference.
  • This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Compliance Statement of Innovation, Science and Economic Development

Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s).

Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference,  including interference that may cause undesired operation of the device.

CAN ICES-003(B)/NMB-003(B)
Canada (ISED)
CAN ICES-003(B)/NMB-003(B)

Limitation of Liability

Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.

This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.

UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD- PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

Proper disposal

  • DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

  • DO NOT throw the device in fire. DO NOT short circuit the contacts.
    DO NOT disassemble the device.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.

We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

VCCI: Japan Compliance Statement
VCCI Class B Statement

**KC: Korea Warning Statement

**

**Ukraine Certification Logo

**

EAC Certification Logo
EAC Certification Logo

**CE Mark Warning

**

ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support

Simplified UKCA Declaration of Conformity

ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Regulations. Full text of UKCA declaration of conformity is available at https://www.asus.com/support/.

Manufacturer ASUSTek COMPUTER INC.
Address, City 1F, No. 15, Lide Rd., Beitou Dist., Taipei City 112,

Taiwan
Authorized Representative in Europe| ASUS COMPUTER GmbH
Address| Harkortstrasse 21-23, 40880 Ratingen
Country| Germany
Authorized Representative in United Kingdom| ASUSTEK (UK) LIMITED
Address| 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England
Country| United Kingdom

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals