USHI LIFE A9R748D Carplay Projector Original Wired to Wireless CarPlay Instruction Manual
- June 5, 2024
- USHI LIFE
Table of Contents
USHI LIFE A9R748D Carplay Projector Original Wired to Wireless CarPlay
Carplay projector Original wired to wireless CarPlay
Instructions for use
LOOKING FOR DISTRIBUTOR
More than 30 years of automotive service provider, own factory, with R & D
design capabilities, support OEM, sincere recruitment of global distribution
agents, welcome to call to discuss cooperation.
- Company: GUANGZHOU USHIAUTO PARTS CO.LTd.
- Address: Floor 1-3, No. 30-2, Lane 1, Wanggang East Street, Fenghuang Street, Yucatan, Tianhe District, Guangzhou City, Guangdong Province, China
If you have any questions, please contact customer service.
Product Features
Change the original wired CarPlay connection method, say goodbye to the data cable connection, wireless transmission brings a more convenient connection experience, you use Apple CarPlay, enter the driver’s compartment automatically connected.
Product specification parameters
- Power input: 5V 1-2.1A
- Product power consumption:0.15W Adaptive resolution: adaptive Power output: DC 5V0.8-2A Product connection method
- Plug the Carplay projector into the USB/ type-C interface of the car display.
**iPhone for wireless connectivity
**
Use of iPhone (wireless Bluetooth connection)
- Connect the Carplay projector to the car display USB port, click Active Search, turn on the phone WiFi and Bluetooth.
- Click the Bluetooth signal of the cell phone on the car display, select pairing on the phone, you can use Apple CarPlay, to achieve wireless connection.
Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>