ATASKY PYI-3003 Interactive Dog Rolling and Flashing Ball Toy with Remote Control User Manual

Interactive Dog Rolling & Flashing Ball Toy with Remote Control

Brand Story

It’s no secret that taking care of a pet comes with many responsibilities, which is why we provide a wide range of supplies to meet all of your pet- parenting needs. From cables and stakes to toys and booster car seats, Petbobi presents a catalog unlike any other.
Here, you’re guaranteed to find the items that best suit your pet’s unique demands.
While we value science-backed information, it’s not the only source we rely on. We maintain a transparent approach that welcomes customer feedback. The people (and pets!) who use our products are the alphas of our operations. We encourage your opinions, so we can improve our products and exceed your expectations.

Instructions for Auto-Cycle Mode

• When the remote control is not in use, the toy will enter its auto-cycle mode upon receiving external force.
•  In the auto-cycle mode, after a few quick standbys – 30s, 60s, and 120s respectively – the toy will launch into its next three jumping modes for 10 seconds each, keeping the jumping fun going strong that attracts your furbaby.
• If there is no external force, the toy will enter sleep mode accompanied by a continuous short flashing blue light.
•  If the toy encounters external force while in sleep mode, it will reset to its initial 10-sec jumping, causing the auto-cycle mode to begin anew.

Charging Instructions

To ensure optimal performance, recharge the toy in the following situations:

1. Pressing the ON/OFF button for several seconds produces no response.
2. If the red light on the toy is flashing continuously, indicating running low on energy.
3. The toy gradually slows down or suddenly ceases to function.
   • It takes 90 minutes to fully charge your toy. The toy can retain its energy for up to five days when not in use.
   • If pressing the ON/OFF button for several seconds produces no response, please replace the battery of your remote control.

Important Note

• When the indicator light of the remote control flashes, it means that the toy is not connected successfully. Double-check the toy and power it on to let the fun begin!
• Each toy can only be paired with one remote control. If your lucky furbaby has more than one of the toys, please ensure to connect them individually.
• For optimal performance and to avoid any control delays due to long distances, please operate the remote control within a clear range of 46 feet.
• The remote control will automatically power off after 5 minutes of inactivity.
• To keep the fun going, promptly recharge your toy when it gradually slows down or suddenly ceases to function.
  “When replacing the battery for your remote control, make sure the positive terminal of the battery is facing upwards (picture 1).

LED Light Instructions

For the Inner Ball

• Red light for charging
• Green light for fully charged
• Colored light for a successful connection with the remote control
• When the colored light turns to a quick flashing blue light, it indicates the toy has entered the low-speed auto-cycle mode.
•  When the colored light turns to a short flashing green light, it indicates the toy has entered the high-speed auto-cycle mode.

For the Remote Control

• Indicator light remains illuminated for a successful connection with the toy
•  Indicator light flashes for no connection with any device

Package Lists

Remote Control*l TheToy”l Type C +usb “1

Technical Parameters

For the Inner Ball
Battery: SOOmAh lithium battery
Battery Volt: 3.7V
Charging Volt: SV
Charging Current: 200mA
Working Temperature: 32-104°F
For the Remote Control
Radio Band: 2.4GHz
Battery: 3V CR2032 battery

Parameters for Remote Control

Before any setting adjustments by using this remote control, make sure to pull out the T-shaped piece that blocks power connections.

• Press for 3 seconds to turn the remote control on or off.
•  Press for 3 seconds to turn the toy off (This button is solely designed to power off the toy. Reactivate the toy by pressing the ON/OFF button of the inner ball).
• Quick press to switch the high-speed mode and the low-speed mode.
•  With a quick press of , the toy will rotate clockwise for 8 seconds.
•  With a quick press of , the toy will rotate counterclockwise for 8 seconds.

Parameters for the Toy

*Important Note : Before any setting adjustments, It’s crucial to open the double shell of your Petbobi toy with the logo facing up.

Press for 5 seconds to turn the toy on or off.
Quick press to switch the high-speed mode with green light flashes and the low-speed mode with blue light flashes.

Use Instructions for Remote Control

1. Open the double shell of your Petbobi toy with the logo facing up. Power on the toy by pressing and the LED light will be on.
   Keep the double shell tightly secured to ensure your furbaby stay safe and sound.

2. Simply press to activate the remote control. The toy will be automatically connected accompanying a colored light, while the indicator light of the remote control will remain illuminated.

3.  Press the and to respectively control the clockwise and counterclockwise rotation of the toy.

4.  Press   to switch the high-speed mode and the low-speec mode of the toy.

5.  Press for a few seconds to turn the toy off.

6.  If the remote control is consistently turned off or switched off after use, the toy will automatically enter the auto-cycle mode.

If you have any questions or good ideas to share, please feel free to contact us.
@Petbobi_ official
@Petbobi_official
hello@petbobi.com
www.petbobi.com
Please feel free to contact us if your toy stops working or have any other problems.

Find Assembly Tutorial on Petbobi YouTube

https://www.youtube.com/channel/UCoq6WBXQXsN0FECqivyFgAw

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>