Shenzhen Forca Technology I39H Smart Watch User Manual
- June 5, 2024
- Shenzhen Forca Technology
Table of Contents
Shenzhen Forca Technology I39H Smart Watch
Product Overview
APP download
search
(Apple store/Google store).
2Scan QR code to download.
“FitCloudPro” in the APP store
User tips
When install the app, it will be prompted to access the phone permissions.
Please
allow all permission /sounds/ icon badges)
Bluetooth
Notification (including alerts
Local network in the “FitCloudPro” app.
Connect Smart Watch
1. Switch watch on: long-press the side button for 3-5 seconds
2. Please turn on the phone’s Bluetooth and location service and make sure
the watch is not bound to other devices Open the FitCloudpro APP on your
mobile phone, Set your personal information enter the device interface. Click
on “Bind Device” Right-slide on the main dial interface of the watch to view
the MAC address,You can use the MAC address from the device list to determine
your device,The device name and the corresponding MAC address are
paired. device is successfully connected.
Step 1: Open “FitCloudPro APP” — “OK, Allow”– ” Add A DEVICE” -Find 136
and choose “Pair” — “Allow-Done
Step2: Go to your mobile phone Bluetooth–Find Watch Call and
choose–connected.
Tips for the FIrst TIme use:
First me to use the watch, please make sure the battery is fully charged.
-
Open the box, use the I36 charging cable, then insert the USB to your laptop or any USB port with 5V to charge the Watch before use to ensure that the Watch is fully charged. The chargingme is about 2 hours. To ensure that the charging contact is good. Please ensure that the metal surfaces are not dirty, oxidizing, and impurities.
When charging, the screen will display the charging symbol. If the device is not used for a long time, please be sure to replenish it every one month. -
When the Watch is first paired with “APP”, it will synchronize the time, date, and quantity of the Watch battery and display the symbol of success of the BT connection
-
How to Boot Device: Long press the watch key for 5 seconds and the Watch will boot.
-
How to Shut Down Device: At the watch face page, Long press the watch key 5 seconds, then choose to shut down. The watch will be turned off and with vibration.
APP Functions and Settings
Main interface/ dial
Switch the customized dial through the APP
(As shown in the picture on the left)
Discover more dials through APP
APP device page dial selection find more dials
download nowPlease do not leave the download page during download.
Personal Profile
Set personal information when you login.
My date-personal date. Gender – height – weight- age .
Call reminder
Keep connected, if the call alert function is enabled, the wristband will
vibrate and display the name or number of the caller when the call
Notifications
Keep connected, if this function is enabled, the bracelet will vibrate when
there are messages such as Wechat, Facebook, twitter and so on. (Give the APP
access to system permission).
Alarms: set the alarms.
Shutter: this function will control your mobile phone to take photos from
watch.
Favorite Contacts : you can add your mobile phone contacts to your watch.
Others: you can set Find a bracelet, Time format, Sedentary reminder,
Raise your wrist to brighten the screen, drink water reminder.
Upgrade: upgrade the watch software when necessary.
Note:
-
When using GPS under sports mode, please turn on location services for phone and device, the watch does not have GPS function,you can open the GPS function in the app.
-
The datas of step, sleeping, heart rate, blood pressure, and blood oxygen saturation of the watch will be synchronized to the app. The relevant data can be synchronized by pulling down the
corresponding page. More detailed information analysis and data recording can be viewed from the APP. -
Each time you open the App, the watch will automatically connect to the phone. After right-slide of the main interface of watch to enter the MAC address interface,the Bluetooth icon will appear,indicating that Bluetooth is connected.If there is no Bluetooth icon, Bluetooth is not connected.
Watch function interface
-
Watch face: long press the watch face button, it can be changed to 4 different watch faces. showed Dates, Time etc. More default watch faces: go to APP FitCloudPro Pro-Watch faces–Discover more
dials-Choose dial–Download immediately-Done. Then you can see the dial will be showed in your watch. -
From the watch face page, put your finger slide to left and right page.
Sports: show the step counts.
Sleep: show the sleep status, like sleep time, deep sleep time etc.
Measure HR : measure your heart rates.
Exercise information: record various exercise information and data.
Phone: you can check phone call records, Contact, Dial pad.
Measure BP: measure your blood pressure.
Blood oxygen: measure blood oxygen.
Weather: show weather status.
Shutter: this function will control your mobile phone to take photos from watch.
Player: Music control, play or pause, last music or next music.
Others: In this page, you can set the dial switch, brightness etc. -
On the watch face page, you can go to the following page by touching the finger from top to bottom.
Do not disturb: you can turn on or off do not disturb function.
Brightness: you can adjust the brightness.
Settings: You can set stopwatch, alarm clock, timer, brightness, phone switch, call settings, vibration,theater mode, factory reset,shutdown,about,APP download. Vibration setting/Brightness adjustment/Bracelet reset Down slide screen will display the interface,(As in the first picture)
- click brightness adjustment, you can adjust the screen brightness you need according to the usage.
- lf you need to use the watch with another phone, you need to reset the watch. Click Restore factory settings, the watch will be restored to the initial state and restart automatically, at this time all data on the wristband is cleared
- Click the “SYSTEM” icon, you can check the version information, Bluetooth MAC address, battery percentage display and Bluetooth connection status.
Why the watch can’t receive the message notification?
Since the Android mobile phone background will automatically clean up the App
which not commonly used, it will cause the watch connection to drop and no
longer push the message.
1. Make sure to turn on message push in the FitCloudpro setting.
2. Make sure the message can be displayed in the mobile phone s notification
bar, message notification is pushed by reading the phone notification bar,the
watch can tget a notification if the message push closed in the mobile phone
sets
Note: Find notification settings in phone settings, turn on WhatsApp,
Facebook, Twitter, Phone, SMS.
Getting to know your Device
It is forbidden to throw this product into the fire to avoid explosion. The
battery life varies according to the environment and user mode.
Warning: This product is not a medical device. The Watches and its
applications should not be used for diagnosis, treatment, or prevention of
diseases and illnesses. please consult qualified medical doctor first if you
want to change your habits such as exercises and sleep to avoid causing
serious casualties. Our company reserves the right to modify and improve the
functions which described in this manual without prior notice. At the same
time, we are also reserves the right to continuously update the product. All
contents are subject to the actual product.
Why does the blood pressure data is different from the Sphygmomanometer?
The difference between the smartwatch data and the sphygmomanometer is
determined by a variety of factors. The measurement site of the
sphygmomanometer is in the radial artery, and the measurement site of the
watch is the two main branches of the arteriole. Normally,the difference value
between aortic blood pressure measurement and micro arterial measurement is
340 . because of the blood flows in the artery in the direction of the
centrifuge, If you use the smart watch and sphygmomanometer to measure at the
same time the sphygmomanometer band make your elbow-under pressure. The blood
pressure cannot flow smoothly to the lower branch of the artery-and increased
vascular tension, which will make the difference larger.
Why can’t wear the smart watch to take a bath &hot springs&sauna?
The bath water temperature is relatively high, it will produce a lot of water
vapor, and the water vapor is gas phase. Its molecular radius is small, it is
easy to infiltrate from the shell gap of the watch, and when the temperature
drops, it will recondense into a liquid phase. Water droplets can easily cause
short circuit inside the watch, damage the circuit board and damage watch
itself. Special attention: For other issues of watch’ s usage, you can get
detailed answers in the app suggestion feedback.
FCC Rules
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>