ADJ BUB773 Professional Bubble Machine User Instructions

ADJ BUB773 Professional Bubble Machine

Introduction

©2018 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, LLC brands, and product names are trademarks or registered trademarks of their respective companies.

ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS

This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device uses and can radiate radio frequency energy and, if not installed and used in accordance with the included instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following methods:

• Reorient or relocate the device.
• Increase the separation between the device and the receiver.
• Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to protecting the environment. Please turn off all electrical products when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you!

• Overview: The American DJ Bubbletron is the perfect solution for anyone who wants to create a fun or artistic effect on stage or at a performance. It’s very easy to use – as easy as pour in the bubbles and turn it on! Bubbletron creates 100’s of bubbles per minute from a high velocity, high out put fan. It takes most types of bubble liquids. Bubbletron is great for bands, DJs, clubs, bars, and small to medium size stages.
• Unpacking: Thank you for purchasing the Bubbletron by ADJ Products, LLC. Every Bubbletron has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all equipment has arrived intact. In the event, the damage has been found or parts are missing, please contact the Customer. Please do not return this unit to your dealer without contacting customer support first.

Customer Support

Contact ADJ Service for any product-related service and support needs. Please visit forums.adj.com with questions, comments or suggestions.

• ADJ SERVICE USA – Monday – Friday 8:00 am to 4:30 pm PST

  • 800-322-6337
  • Fax 323-832-2941
  • support@adj.com

• ADJ SERVICE EUROPE – Monday – Friday 08:30 to 17:00 CET

  • +31 45 546 85 60
  • Fax +31 45 546 85 96
  • support@adj.eu

• REPLACEMENT PARTS please visit parts.adj.com

• ADJ PRODUCTS LLC USA
  6122 S. Eastern Ave. Los Angeles, CA. 90040

  • 323-582-2650
  • Fax 323-532-2941
  • www.adj.com
  • info@adj.com

• ADJ SUPPLY Europe B.V
  Junostraat 2 6468 EW Kerkrade, The Netherlands

  • +31 (0)45 546 85 00
  • Fax +31 45 546 85 99
  •  www.adj.eu
  • info@adj.eu

• ADJ PRODUCTS GROUP Mexico
  AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

  • +52 728-282-7070
  • ventas@adj.com

DOCUMENT VERSION

Date| Document Version| Software Version| DMX Channel Mode| Notes
---|---|---|---|---
8/2018| 1| 1.0|  | Initial Release

Safety Precautions

For Your Own Personal Safety, Please Read and Understand This Manual Completely Before You Attempt To Install Or Operate This Unit!

• To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
• Do not spill water or other liquids into or onto your unit.
• Be sure that the local power outlet matches that of the required voltage for your unit.
• Do not attempt to operate this unit if the power cord has been frayed or broken.
• Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal shortage.
• Disconnect from the main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user-serviceable parts inside.
• Never operate this unit when its cover is removed.
• Always be sure to place this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit if it becomes damaged.
• This unit is intended for indoor use only; use of this product outdoors voids all warranties.
• Always mount this unit in a safe and stable manner.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
• The fixture should be cleaned only as recommended by the manufacturer. See page 7 for operating and cleaning details.
• This fixture should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
  • Objects have fallen, or liquid has been spilled into the appliance.
  • The appliance has been exposed to rain or water.
  • The appliance does not appear to operate normally or exhibit a marked change in performance.

Features

• Portable high-output bubble machine
• Creates hundreds of bubbles per minute
• Durable plastic casing with EZ-Access front fluid tank
• Large, high velocity, high output fan
• ON/OFF switch on the rear of the unit
• Carrying handle
• Compatible with ADJ Bubble Juice (recommended) as well as most types of bubble liquid.
• Includes Z-LC3 Wired Remote Control
• BUBXL-WR Wireless Remote Control is sold separately

General Instructions

• To optimize the performance of this product, please read these operating instructions carefully to become familiar with the basic operations of this unit.
• These instructions contain important safety information regarding the use and maintenance of this unit.
• Please keep this manual with the unit, for future reference.

Product Registration

• The Bubbletron carries a one-year (365 days) limited warranty.
• Please fill out the enclosed warranty card to validate your purchase.
• All returned service items whether under warranty or not, must be freight prepaid and accompany a return authorization (R.A.) number.
• The R.A. number must be clearly written on the outside of the return package.
• A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container.
• If the unit is under warranty, you must provide a copy of your proof of purchase invoice.
• You may obtain an R.A. number by contacting customer support at 800-322-6337.

Power Supply

• Before plugging your unit in, be sure the source voltage in your area matches the required voltage of your Bubbletron.
• Because line voltage may vary from venue to venue, be sure to plug your unit into a matching wall outlet before attempting to operate.

Operation

Filling the Tray Reservoir:

• Place the Bubbletron on a flat-level surface.
• The bubble juice tray is located in the front of the machine. Fill the tray, using premium American DJ® brand bubble juice. Make sure that you do not fill the tray above the designated fill line. Filling above the line will result in damage to the machine. After the usage, please empty the remaining juice to prevent damage as well.

Operation:

• With the unit on a flat surface and with the tray filled, flip the power switch to the “ON” position and watch the bubbles come out by the hundreds. Be sure the unit remains in a level position to avoid accidental leaking.

Maintenance:

• The frequency of cleaning depends on the environment in which the device operates in: damp, smoky or particularly dirty environments can cause greater accumulation of dirt and or debris in the tank. Clean the external housing of the fixture and the tank at least periodically with a soft cloth to avoid dirt/debris accumulation. NEVER use alcohol, solvents, or ammonia-based cleaners.

Remote Operation (Optional):

• The unit may be used with the (included) Z-LC3 Wired Remote Control or the (optional) BUBXL-WR Wireless Remote Control. When using a remote, set the power switch to the “OFF” position.

Remote Operation:

1. With the power switch in the “OFF” position, plug the remote control into the unit.
2. Push the power button on the remote to the “ON” position, main power will be indicated by a glowing red LED above the remote power button.

Specifications

Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.

Optional Accessories

Additional parts and accessories available at www.adj.com

Warranty

LIM ITE D W A R R A N TY (U S A O N LY )

• ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
• For warranty service, you must obtain a Return Authorization number (RA#) before sending back the product-please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such accessories, or for the safe return thereof.
• This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product, if the product has been repaired or serviced by anyone other than ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
• This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that effect.
• ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured.
• No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with the products described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.
• This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

LIMITED WARRANTY PERIODS

• Non L.E.D. Lighting Products = 1-year (365 days) Limited Warranty (Such as Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding LED and lamps)
• Laser Products = 1 Year (365 Days) Limited Warranty (excludes laser diodes which have 6 month limited warranty)
• L.E.D. Products = 2-year (730 days) Limited Warranty (excluding batteries which have a 180-day limited warranty) Note: 2-Year Warranty only applies to purchases within the United States.
• StarTec Series = 1-Year Limited Warranty (excluding batteries which have a 180-day limited warranty)
• ADJ DMX Controllers = 2 Year (730 Days) Limited Warranty

ww.adj.com 

FREQUENTLY ASKED QUESTIONS

What is the brand and model of the bubble machine?

The bubble machine is the ADJ BUB773 Professional Bubble Machine.

What is the price of the ADJ BUB773 Professional Bubble Machine?

The price of the ADJ BUB773 Professional Bubble Machine is $129.99.

How much does the ADJ BUB773 Professional Bubble Machine weigh?

The ADJ BUB773 Professional Bubble Machine weighs 4 pounds.

What are the dimensions of the ADJ BUB773 Professional Bubble Machine?

The dimensions of the ADJ BUB773 Professional Bubble Machine are 14.25 x 7.5 x 8.25 inches.

What is the item model number of the ADJ BUB773 Professional Bubble Machine?

The item model number of the ADJ BUB773 Professional Bubble Machine is BUB773.

What is the power source of the ADJ BUB773 Professional Bubble Machine?

The ADJ BUB773 Professional Bubble Machine is powered by corded electric.

How much power does the ADJ BUB773 Professional Bubble Machine consume?

The power consumption of the ADJ BUB773 Professional Bubble Machine is 24W.

What is the fluid consumption rate of the ADJ BUB773 Professional Bubble Machine?

The fluid consumption rate of the ADJ BUB773 Professional Bubble Machine is 1 liter every two hours.

What is the hardware platform of the ADJ BUB773 Professional Bubble Machine?

The hardware platform of the ADJ BUB773 Professional Bubble Machine is CONSUMER_ELECTRONICS.

What are the dimensions and weight of the ADJ BUB773 Professional Bubble Machine in inches and pounds?

The dimensions of the ADJ BUB773 Professional Bubble Machine are 14 x 7 x 8.25 inches, and it weighs 4 lbs. / 2kg.

What type of events or settings is the ADJ BUB773 Professional Bubble Machine suitable for?

The ADJ BUB773 Professional Bubble Machine is suitable for various events and settings, including parties, weddings, concerts, and stage performances, to add a fun and visually appealing element with bubbles.

Why is my ADJ BUB773 Professional Bubble Machine not turning on?

Check if the power cord is securely plugged into a power outlet and if the power switch on the machine is in the on position. Ensure that the power source is functioning properly.

The bubbles produced by my ADJ BUB773 Professional Bubble Machine are too small. How can I fix this?

Ensure that the bubble solution being used is of the appropriate viscosity and concentration. Adjust the bubble solution mixture as needed to produce larger bubbles.

My ADJ BUB773 Professional Bubble Machine is leaking bubble solution. What could be the issue?

Check if the bubble solution tank is properly sealed and if there are any cracks or damages to the tank or tubing. Ensure that the machine is placed on a level surface to prevent leakage.

Why is the motor of my ADJ BUB773 Professional Bubble Machine making unusual noises?

Check if the motor is overheating or if there are any obstructions causing it to strain. Clean the motor and ensure that the bubble solution is not too thick, which can put extra strain on the motor.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: ADJ BUB773 Professional Bubble Machine User Instructions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>