ergotron SV43-1320-0 Styleview Medical Cart User Guide
- June 5, 2024
- ERGOTRON
Table of Contents
STYLEVIEW®
QUICK REFERENCE
RANGE OF MOTION
CAUTION! Completely release brake engagement before raising or lowering the cart. Raising or lowering the cart with the brake partially engaged may cause product damage.
KEYBOARD LIGHT
Your computer must be on for this light to function.
Keyboard Light will automatically turn off after 15 minutes if not manually
turned off.
ERGONOMICS
Working – customize to your size
- Set top of monitor screen about one inch below eye level – Release the brake and lift or lower riser as needed.
- Tilt screen for comfortable viewing and to reduce eye and neck strain.
- Pull keyboard tray forward and position mouse tray and mouse pouch on right or left, as needed.
- Work with elbows bent at about 90° to minimize muscle strain.
- If the riser moves up and down with difficulty, or if it drifts out of the setting position, consult the product manual for adjustment information.
- Stay in charge!
Powered carts should be plugged into the outlet as often as possible to keep the battery charged and the computer running.
Moving – stow before you go
- During normal movement, release the brake and lower worksurface to the lowest position for optimal stability and unobstructed view.
- Tuck away open trays and return the mouse, scanner, and other accessories to their places. Clear worksurface
- Unlock both front casters.
- Pushcart from the rear with elbows bent at about 90° to maximize control and minimize muscle strain.
- Don’t run out!
Before moving, make sure the cord is unplugged from the outlet and hooked to the basket for safe travel. Remember, charge the battery fully 100% every day!
Unlock Drawer (2 methods): NOTE: All Drawers in a row must be closed before a
new row can be unlocked.
• Enter User PIN and press ENTER (only numbers for available drawer rows flash
green), then press desired drawer row number*.
• Key
*Drawer Row Numbers:
Lock Drawer:
• Wait 4 seconds for the lock to engage automatically.
NOTE: Always ensure the drawer is pushed in all the way and engaged with
the lock.
CAUTION: Open only one drawer at a time. Do Not push the cart when drawers are open. Failure to follow these instructions may cause the cart to be unstable.
This power system interface will alert you to the percentage of charge remaining in the cart battery with a series of steady or flashing red, yellow, or green lights, and an alarm that will beep when the charge gets below 10%. Remember, the battery needs to be charged to 100% every day, and you can use the cart while charging, so plug in the cord as often as possible to avoid running out of power!
NOTE: Put the monitor in power save mode to optimize battery run time.
If other lights are flashing red/green it could indicate a power system fault.
If this occurs contact Ergotron Customer Care.
NOTE: Frequent operation of the cart while battery charge levels are
below 10% may reduce the life of your battery.