REDRAGON K617 Fizz RGB Wired Mechanical Gaming Keyboard Instruction Manual

: June 5, 2024
: REDRAGON

Table of Contents

Dear user
OS support
How to plug in
Key Function Introduction
Backlight setting
FAQ
FCC Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FIZZ RGB
WIRED MECHANICAL GAMING KEYBOARDS

Please scan here to download user manual
Wired Mechanical Gaming Keyboard Operating Instructions

Dear user

Thank you for choosing our RIEDRAGOII product. To protect your rights and for better customer service, we ask that you note our warranty rules.

Within the guaranty period, the repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquakes are not included.
Consumable parts (such as footpads) and spare parts replacement are not included in our warranty.

OS support

Windows XPNista/Win7/Win8/Win10

How to plug in

Plug type C cable to USB cable with keyboard and PC, keyboard is plug and play, no need driver.

Key Function Introduction

FN key work with other keys

1.FN + (1!] =F1

Backlight setting

FN+ [Alt_R] : Go with the stream, Clouds fly, Winding Paths, The trial of Light, Breathing, Normally on, Pass without Trace, Ripple Graff, Swift action , Digital Times, Flowers blooming FN+ [M] : Adjust lighting brightness (Total 5 levels). FN+ [,<] : Adjust lighting speed(Total 5 levels). FN + [Spacebar] : Entering backlight color selecting mode by pressing FN + (Spacebar), (Spacebar) will keep flickering between all RGB colors. If not, then this backlight mode is not supported (The Trial of Light & Flowers Blooming are not available for this DIY mode). Next, press the key of the color you want to set.Then, all backlight modes will be in that color. FN+WIN: To Lock Windows key, repeat to unlock.

FAQ

If the keyboard doesn’t respond, please check if the keyboard’s USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer
If you spill liquid on the keyboard, please remove keyboard’s USB cable from the computer immediately. Wipe up excess liquid and put the keyboard in a warm place (for instance, under a lamp) to let the keyboard dry naturally before using again.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there Is no guarantee that interference will not occur In a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radlo/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.