eufy T2250 RoboVac G30 Robot Vacuum Cleaner User Guide
- June 3, 2024
- Eufy
Table of Contents
eufy T2250 RoboVac G30 Robot Vacuum Cleaner User Guide
Using Your RoboVac
Remove the sticker next to the power switch and the foam blocks beside the bumper before use.
Keep the auto-empty station plugged in, otherwise RoboVac will not
automatically return.
When the auto-empty station is connected to AC power, the LED on the auto-
empty station is steady white.
Make sure you have purchased the autoempty station with the correct input
voltage.
The input voltage information can be found on the bottom of the device.
Fully charge RoboVac before use. The LED indicator on the button is orange while charging and turns steady blue when fully charged.
Download the eufy Clean app and follow the instructions in the app to complete connection to Wi-Fi. Afterward, you can control RoboVac via the app. Refer to the owner’s manual for details.
Important Tips
a Remove power cords and small objects from the floor that may entangle
RoboVac.
b Fold tasseled edges of rugs underneath to prevent tangling RoboVac.
Avoid cleaning dark-colored high-pile rugs or rugs thicker than 1.02 in / 26
mm as they may cause RoboVac to malfunction.
c It is strongly recommended to place physical barriers in front of
fireplaces and certain areas (i.e. air vents) that may cause damage to RoboVac
if entered.
d Keep RoboVac away from wet areas during cleaning.
e RoboVac may climb on top of objects less than 0.63 in / 16 mm in
height. Remove these objects if possible.
f Anti-drop sensors will prevent RoboVac from tumbling down stairs and
steep drops in most cases.
Sensors are less effective if dirty or used on carpeted, reflective, or dark
colored floors. Place physical barriers to block off areas where RoboVac may
fall.