REDRAGON K631 Mechanical Wireless Keyboard Instruction Manual
- June 5, 2024
- REDRAGON
Table of Contents
Mechanical Wireless Keyboard
Instruction Manual
Dear user
Thank you for choosing dragon product. To protect your rights and for better customer service, please read the following warranty rules carefully.
- Within 18 months of the purchase date, the repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into the water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquakes are not included.
- Consumable parts (such as foot pads) and spare parts replacement are not included in our warranty.
OS Support
WinXPNista/Win7/VVin8/Win10
**How to plugin
**
Plug type C cable to USB cable with keyboard and PC, keyboard is plug and
play, no need driver.
Key Function Introduction
FN key work with other keys
- FN+ [1!] =F1
- FN +[2@] = F2
- FN + [3#] =F3
- FN + [4$] = F4
- FN + [5%] =FS
- FN + [6^] =F6
- FN + [7 &] = F7
- FN + *[8]** = F8
- FN + [9(] = F9
- FN+ [0)] =F10
- .FN+ [-_ ] =F11
- FN + [=+] =F12
- FN+ [”] =Insert
- FN+ [[(] =Home
- FN+ [[{] =End
- FN+ []}] =End
- FN+ [”„] =PRTSC
- FN+ [Z] =Volume-
- FN+ [×] =Volume+
- FN+[C] =Mute
- FN+ [V] =STOP
- FN+ [B] =Previous track
- FN+ [N] =Play/Pause
- FN+ [M] =Next track
- FN+ [ESC] =Press and hold for 3 seconds, back to default setting
Backlight setting
FN+ [PGDN] : Switch backlighting effects, total 20 patterns.
FN+ [↑ ↓] : Adjust lighting brightness.
FN+ [,< ] or [. >1 : Adjust lighting speed.
FN+ [Backspace] :Turn OFF the backlighting
FN+ [WIN] : Lock the Windows key and APP key, repeat to unlock.
FN+ [TAB] : Press FN+[TAB] to get ready for setting the backlight colors
on the keys. [TAB] key now is your palette. Press FN+[TAB] for color
switching, including 8 color options and light-off mode.
Meanwhile 3 indicators [Num, Cap, Scroll] twinkle. Then press the desired key
for color setting.
Finally, press FN+[TAB] key to save the setting.
FAQ
- If the keyboard doesn’t respond, please check if the keyboard’s USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
- If you spill liquid on the keyboard, please unplug the keyboard’s USB cable from the computer immediately. Wipe off excess liquid and put the keyboard in a warm and ventilated place. Make sure the keyboard is dried naturally before the next use.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.