ECOLAB XP Foamer Powerful Cleaning Machine User Guide

ECOLAB XP Foamer Powerful Cleaning Machine

Instruction

1. The machine must only be operated by instructed personnel.
2. Follow the instructions from the supplier of detergents.
3. Always wear suitable clothing and footwear.
4. Never direct the water jet towards people, pets, or electrical installations.
5. Never block the release of the spray handle.
6. Always activate any locking device on the spray handle when replacing nozzles.
7. Only use the water from the system for cleaning purposes.
8. Note: As an illustration of a spray handle, an Atlantic 450 is shown. Ensure that water is connected to the unit.

Start/Preparing

1. Connect the water supply hose to the inlet fitting on the side of the unit. The water supply line should have a quick connect fitting that will easily connect to the inlet fitting. 
2. Make sure the ball valve at the end of the blue hose is closed. The valve handle is perpendicular to the hose in the close position.
3. Turn on the water supply to the unit
4. Insert the plug into a 220V outlet.
5. Pull back the valve sleeve. Insert the nozzle. Release the valve sleeve. Pull-on the end of the nozzle to make sure the nozzle is securely connected to the ball valve. If not, repeat the previous steps until the nozzle I securely connected to the ball valve. The foam operation requires the WHITE nozzle. Rinsing and sanitizing operations require the BLUE nozzle. Both nozzles connect to the ball valve in the same manner.
6. Turn the selector switch on the front of the unit to the desired operation.
7. Point the ball valve and nozzle at the desired location.
8. To open the ball valve handle clockwise. The valve is fully open when the handle is parallel to the hose.
9. Apply foam, rinse water, or sanitizer.

Change cleaning agent

Stop Procedure

References

• Water, Hygiene and Infection Prevention Solutions and Services | Ecolab

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>