Tefal Advanced Family Blenders User Manual
- June 5, 2024
- Tefal
Table of Contents
Tefal Advanced Family Blenders
DESCRIPTION OF THE APPLIANCE
- Lid cap
- Lid
- Jug
- Removable silicone gasket
- Motor unit
- Brush
- Screen
- Start/Stop button
- Program selector
- Pulse/Clean button
- Blend/Pause button
- Heat button
- Measuring cap
CAUTION: The safety precautions are part of the appliance. Read them carefully before using your new appliance for the first time. Keep them in a place where you can find and refer to them later on. The appliance will only start if the jug is correctly positioned on the motor unit (E) and the lid locked on the jug.
BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME
-
Before using your appliance for the first time, rinse the parts that come into contact with food (jug, lid and measuring cap) with soapy water
CAUTION : Do not immerse the appliance in water (neither the motor unit nor the jug base). Never put the motor unit (E) under running water. Clean with a damp cloth and dry it carefully.
The blades are extremely sharp and not removable. -
Make sure all the packaging has been removed before operating the appliance.
USING YOUR APPLIANCE
- Put the appliance on a flat, stable, heat-resistant surface away from sources of heat or water splashes.
- Make sure the silicone gasket (D) is in place on the motor unit (E). Position the jug (C) correctly on the motor unit Fig. 1 and 2.
- Add the ingredients into the assembled jug without exceeding the maximum level indicated:
- 1750 ml max for cold preparation
- 1400 ml max for hot preparation
AUTOMATIC FUNCTION
How to use :
- Lock the lid on the jug and place the lid cap in position on the lid and lock it by rotating it. The appliance only starts up once the jug and lid are correctly in place.
- Plug in the blender. The product makes a beep and the screen lights up.
- The product will be immediatly in standby mode. At this stage you can select a program by turning the program selector (l). The led will turn on on the selected program. The recipe time information will be displayed. For hot programs, please note that the time indicated does not take into account the pre-heating time needed which may vary according to the initial temperature and quantity of your ingredients (between 5 and 15 minutes).
- Press the start/stop button. Then the appliance starts to work automatically.
- The pre-heat animation appears on the display during pre-heating time for hot recipes
Example:
Once the pre-heating phase is completed, the recipe cooking time countdown
will start.
- At the end of the recipe, the blender stops automatically. The appliance bips 5 times.
- You can also stop the blending during the cycle:
- within 1 minute of working, press the start/stop button
- more than 1 minute of working, press and hold the start/stop button for 3 seconds
- To add ingredients while blending for cold preparation only, remove the lid cap (A) from the lid (B) and add the ingredients through the feeder hole. Beware of the risk of spatter.
CAUTION : We recommend not to add ingredients while blending hot preparations. (risk of splashing). Do not remove the lid cap (A) from the lid (B) during hot preparations. It can reach high temperature and cause burns. Do not shake the motor unit or the jug when the blender is in use.
CAUTION: After running one program, especially long recipe, let the blender rest for minimum 5 minutes before operating it again.
8 programs :
These programs are predifined on a standard basis. You can freely add extra
heating/blending thanks to the manual settings at your convenience.
Hot programs :
Soup, Compote, , Coulis, Hot sauce, Mutligrain milk.
MANUAL FUNCTIONS
-
Pulse: Press the pulse/clean button to let the appliance run for only a few seconds at a time. To stop it, release the button. Press the pulse/clean button as often as it is necessary.
-
Clean : allows to pulse/clean your appliance with soapy water. Press and hold the pulse/clean button until the letter H (maximum speed) appear on the screen. Release the button to stop after 15 to 30 seconds to complete the cleaning sequence.
The longest working time can not be more than 3 minutes. -
Blend/Pause : allows to freely control the way you want to blend. Press the blend/pause button, the screen indicates « 5 » but you can choose the blending speed from 1 up to 9 by turning program selector (I). « H » is the maximum speed. Then press start/stop button. You can set up the working time by turning program selector, between 10secondes and 3 minutes. The remaining time appears on the screen. Wait for the blender to stop automatically. The appliance bips 5 times. You can also stop the blending during the cycle :
- within 1 minute of working, press the start/stop button
- more than 1 minute of working, press and hold the start/stop button for 3 seconds.
-
Heat : allows to freely control the way you want to heat. Press the heat
button, the screen indicates « 60 » but you can choose the heating temperature from 40° up to 100° by turning program selector (I). Then press start/stop button. You can set up the working time by turning program selector, beetween 5 minutes and 90 minutes. The remaining time appears on the screen. Wait for the blender to stop automatically. The appliance beeps 5 times. You can also stop the blending during the cycle :- within 1 minute of working, press the start/stop button
- more than 1 minute of working, press and hold the start/stop button for 3 seconds.
-
Start/Stop : allows to stop any blending or heating program before the end by pressing this button. You can also stop the blending during the cycle :
- within 1 minute of working, press the start/stop button
- more than 1 minute of working, press and hold the start/stop button for 3 seconds
-
Overload protection The appliance is equipped with overload protection. This prevents the motor from being damaged by overloading. If the appliance switches off during operation, proceed as follows :
- Switch the appliance off using the power button, unplug and leave it to cool down for approximately 15-20 minutes.
- Reconnect the appliance to the power supply and resume blending.
CLEANING
- Clean the jug immediately after use.
- For easy cleaning, you can use the Pulse/Clean button :
- Put 150ml of water and 1 drop of washing up liquid in the jug. Press the Pulse/Clean button. An excess of washing up liquid creates more foam and consequently can lead to overflowing. Finish cleaning the jug with the aid of a sponge.
- Rinse the inside of the jug and the lid under running water.
- In the event of the heated part of the jug getting extremely dirty, fill in the jar with a mix of water and washing up liquid and let it soaked for a few hours to help get it clean.
- Use a damp cloth to clean the motor unit (E). Dry it carefully.
- The detachable parts (lid, lid cap, carrier seal, seal, measuring cap) can be cleaned with a sponge and hot soapy water. You can also use the brush to clean the inside of the jug.
Caution:
- Empty the preparation, the jug is not meant for storing food in the refrigerator or freezer.
- To clean the outside of the motor unit and the walls of the jug, use a damp cloth.
- Do not immerse the appliance in water (neither the motor unit nor the jug base). Never put the motor unit (E) under running water.
- The jug, lid cap and removable silicone gasket must not go in the dishwasher.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
| Problems | Causes | Solutions |
|---|
Appliance does not work
| ****
The plug is not connected.
| Connect the appliance to a socket with the same voltage as indicated on the
rating plate of the appliance.
The blender jug is not positioned correctly on the motor unit or the jug and
lid are correctly in
place and are not locked onto the motor unit.
| Check that the blender jug and the lid are positioned properly on the motor
unit as explained in the instructions.
Appliance, keypboard or program not responding| Unplug the appliance, wait for
1 minute and plug in again.
In case of overheating
| Switch the appliance off using the power button, unplug
and leave it to cool down for approx.15-20 minutes.
The appliance stopped while in use
| ****
Overload or overheating
| – Switch the appliance off using the power button, unplug
and leave it to cool down for approx.15-20 minutes.
– Reconnect the appliance to the power supply and resume blending.
Excessive vibrations
| The product is not placed on a flat surface.| Place the appliance on a flat
surface.
Volume of ingredients is too high.| Reduce the quantity of ingredients
processed.
The silicon gasket (D) is missing or not correctly positioned.| Place the
silicone gasket correctly on the motor unit.
Leak or overflow from the lid
| Volume of ingredients is too high.| Reduce the quantity of ingredients
processed.
The lid is not correctly positioned.| Place the lid correctly on the blender
jug.
Leak from the bottom of the blender jug
| ****
Deterioration of the watertightness of the appliance.
| Caution : the blades are not removable.
Contact the consumer service, see contact information in the warranty leaflet.
The blades do not turn easily
| Pieces of food too large or too hard.| Reduce the size or quantity of ingredients processed.
The blended liquid is too hot and distorted the silicon gasket.
| Contact the consumer service, see contact information in the warranty
leaflet.
Problems| Causes| Solutions
---|---|---
Cooking problem
| The food is not cooked enough or / The food is overcooked| use manual function to adapt time of use and heating temperature
Food sticks to the bottom
| use manual function to adapt time of use and heating temperature. And see cleaning instructions
If your appliance is still not running properly, please contact the customer service department for your country