Srhythm True Wireless Stereo Earbuds SoulMate Series (S5) User Manual

True Wireless Stereo Earbuds

What’s in the Box:

Pay Attention to Battery
S5 is powered by a built-in rechargeable lithium battery. Please charge S5 above 8 hours before using it for your first time.

1. Only the attached Type-C cable can be used for charging the battery. Wireless charging is also workable. Incorrect charging may damage batteries and earbuds.
2. Do not attempt to open rechargeable batteries or battery packs that may break products because of the precise structure. There are also no usable parts in it.
3. Rechargeable batteries only can be recharged by adults. Keep the battery out of reach of children. If children swallowed it, please take them to the hospital immediately.
4. Keep the battery away from the fire. Do not throw the battery into the fire, otherwise, it may explode. Batteries may also explode if being damaged. Please handle and dispose of it according to your local conditions and regulations.

Product Dimensions:
You could replace silicon ear tips to be the best suitable size for your ears. (S/M/L size for your choice)

More stable wearing :
Special earplugs on S5 earbuds give you more stable wearing, not easy to fall out.
Please follow these steps to wear.

1. Gently insert the earplugs to ensure comfortable wearing.
2. Rotate and adjust the earplugs to the correct position.

Parameters:
Wireless Noise Cancelling Earbuds S5
Wireless charging and wired charging are both workable.

(Wireless Charging)
Operating voltage| Earphone 3.7V   Earphone 65mAH
Battery capacity| Charging box 1000Mah
Weight| 6g for single earphones 54g for charging box

Above data are all from the laboratory and for reference only.
The charging time of the charging box will be prolonged if the charging box is not in the middle of the wireless charging base. Because the wireless charging base transmits the power in the form of coils.

Enter Pairing Mode:
Before Pairing:

1. Taking out the earbuds from the charging case
2. Tear off the protective film and throw them away. If low battery, please charge.
3. Wait 5 seconds to let the earbuds pair with themselves automatically. One earbud will flashlight and the other will not if paired successfully.

Start Pairing:
Open the “Bluetooth” function on your phone, search for “S5” and click it to connect. The pairing is successful when the blue and white LED indicator lights are off.
Automatic Pairing:
Normally your earbuds will automatically pair with your mobile next time once ever paired successfully. Sometimes perhaps still need you to click the Bluetooth pairing name “S5” on your mobile.
*After taking out earbuds from the charging box, if it is not used for about five minutes, earbuds will automatically shut down to save power. Touch and hold the touchpad of the earbuds for 2-3 seconds to turn the earbuds on.
* If connect with other devices, please firstly disconnect or cancel the pairing in the Bluetooth control panel on your phone, your S5 will enter a standby state after disconnecting.**

Ambient Mode(ADT Mode):
Tap the touchpad of either earbud twice. The reminder voice of earbuds “ADT(Audio Pass-Through) O /Off” will remind you. Normal Mode, Ambient Mode, and ANC Mode, these 3 modes will be circulation.
Charging to the Charging Box:
Connect the attached USB Type-C cable to the USB interface(charging wall or charger that is not provided by Srhythm) and charging box under-voltage 3.7V. It takes about 1-2 hours to fully charge earbuds and the charging box.

Indicator light status of charging box:

• white light flashing: being charging
• 1 white light on insufficient power
• 4 white lights on charging completed

*Voltage exceeds 3.7V and under 28V will start charging protect mode. and the power can not be charged.*
Voltage over 28V may break products.**

Wireless charging:

The charging time of the charging box will be prolonged if the charging box is not in the middle of the wireless charging base. Because a wireless charging base transmits the power in the form of coils. Charging Time: 3-5 hours based on power 5W-10W

Notice:

• Please put the charging box in the center of the wireless charger to speed up charging. The wireless charger is not provided.

Mobile charging:
Put earbuds into the charging box, and pay attention to the left and right sides. The magnetic suction of the charging box will adjust the earbuds to the right position. It takes about 1-2 hours for earbuds to be fully charged on the left/right. Charging is started once the blue light of the earbuds is constantly on. Please kindly remember to wipe and dry charging connection parts of earbuds before mobile charging.
*If the charging box is opened, earbuds will stop being charged.

Multi-function Touchpad:
Both left and right earbuds have a touch control function.

| Play/Pause: Tap the Touchpad of either earbud once.
---|---
| Answer/End call: Tap on either side to answer/end call.
**| ANC On/Off: Tap the Touchpad of either earbud twice.
**| ADT On/Off: Tap the touchpad of either earbud twice. (Normal Mode, ANC Mode, and Ambient Mode, these 3 modes will be circulation.)
**| Previous Song: Touch and hold the Left Touchpad for 3 seconds.
**| Next Song: Touch and hold the Right Touchpad for 3 seconds.
**| Activate Voice Assistant: Tap the Touchpad of either earbud 3 times.
**| Game mode: Tap the Touchpad of either earbud 4 times to turn on/off the game mode. Three beeps could be heard.
**| Turn Off Earbuds: Touch and hold the Touchpad of either earbud for 5 seconds.
**| Reset Earbuds:
Please remember to charge earbuds to be full power before resetting them.

1. Take earbuds out of the charging box, and long-press both earbuds’ touchpads for 5 seconds to turn the earbuds off. A beep and a female voice prompt: Power Off can be heard.
2. Long press both earbuds’ touchpads for 12 seconds, during this process, earbuds are from turning on to off. The Voice: Power on, Pairing mode, and four beeps can be heard sequentially.
3. Put earbuds into the charging box, close, and reopen it when the light of the charging box is on.
4. Take out earbuds from the charging box again, and wait a few seconds for the earbud and earbud to pair automatically. One earbud will flashlight and the other earbud will not if paired successfully.
5. Ignore Bluetooth pairing name S5 on your device. Close and reopen your device’s Bluetooth. Find the pairing name S5 and click to pair. Voice prompt: Connected can be heard.

Replace Silicone Earplug and Ear-tips:

Q &A:

1. Why can’t the earbuds connect to each other successfully?/Why do I only hear the sound on one side?
   Here are 3 ways to connect:
   The First Way: Ignore Bluetooth pairing name S5, then close and reopen your device’s Bluetooth.
   The Second Way: Put earbuds back in the charging box, close and reopen the charging box, then take the earbuds out to repair.
   The Third Way: Reset earbuds as below steps： How to reset the earbuds?①②③④⑤

2. How to reset the earbuds?
   Please remember to charge the earbuds to full power before resetting them.
   ①Take earbuds out of the charging box, long press both earbuds’ touchpads for 5 seconds to turn earbuds off. A beep and a female voice prompt: Power Off can be heard.
   ②Long press both earbuds’ touchpads for 12 seconds, during this process, earbuds are from turning on to off. The Voice: Power on, Pairing mode, and four beeps can be heard sequentially.
   ③Put earbuds into the charging box, close and reopen it when the light of the charging box is on.
   ④Take out earbuds from the charging box again, and wait a few seconds for earbud and earbud to pair automatically. One earbud will flashlight and the other earbud will not if paired successfully.
   ⑤Ignore Bluetooth pairing name S5 on your device. Close and reopen your device’s Bluetooth.
   Find the pairing name S5 and click to pair. Voice prompt: Connected can be heard.

3. How to turn off the earbuds?
   Solutions:3 ways to turn off your earbuds:
   The First Way: Touch and hold the touchpad for 5 seconds when they are not connected to mobile devices.
   The Second Way: Put earbuds into the charging box to turn off earbuds automatically.
   The Third Way: Earbuds will power off automatically if there is no connection with a Bluetooth device about 5 minutes after powering on.

4. How to turn on the earbuds?
   Solutions:2 ways to turn on your earbuds:
   The First Way: Touch and hold the touchpad for 2-3 seconds to turn the earbuds on.
   The Second Way: Put earbuds into the charging case, then take them out of the earbuds, that turn on automatically.

5. Why is one earbud
   workable and the other earbud unworkable when I take earbuds out of the charging box?Solution: It doesn’t mean that the earbud is broken. When the earbud is charging, you did not put the earbud in the right position, or there is dust/something else remaining on the charging connection parts of the earbud which affects charging. So the unworkable one earbud is out of power.

6. Why can not earbuds be charged in the charging box?
   Solution: Please make sure your charging box with power. Kindly remember to wipe and dry charging connection parts of earbuds, then put them into the charging box. Perhaps some dust or something else remains on the charging connection parts of earbuds that will affect charging.

PLEASE NOTE:
Do not handle the earbuds roughly. Do not press them with heavy objects. Keep them clear of high temperatures, humidity, and moisture.
For best performance, keep away from Wi-Fi routers and other high-frequency transmitting devices.
Please use the earbuds within the effective distance of 10 meters. There should be no physical obstruction (such as a wall, etc.) between the Bluetooth device and the earbuds.
The earbuds can be paired with any device that supports Bluetooth.

Points for Attention

1. The risk of hearing loss can be reduced by following the following safety guidelines: When connecting the headset, adjust the volume control to a minimum, and then slowly adjust the volume to a comfortable degree. Keep the volume as low as possible. If the volume needs to be increased, please adjust the volume control slowly. And stop using the speaker immediately if you feel unwell in the ear or if you got tinnitus. Using a high volume for a long period of time will make your ears used to such volume, causing permanent damage to your hearing even without any apparent discomfort.
2. If you are wearing a pacemaker or other electronic medical device, you should seek your doctor’s advice before using this product.
3. The packaging contains small parts that can endanger children. Therefore, it should be kept out of the reach of children. Swallowing plastic bags can cause suffocation.
4. Do not attempt to disassemble the product or insert any object into the product by yourself, otherwise, it may cause a short circuit, which may lead to fire or electric shock.
5. The customer shall not replace or repair any component. Only authorized dealers or repair service centers can open-finished products. If any part of the product needs to be replaced for any reason (including normal wear and tear and damage or cracking), please contact the vendor.
6. Avoid rain, dampness, or contact with other liquids.
7. If the product is overheating, falling, or damaged, or the product falls into a medium liquid, please stop using it.
8. Using headphones while driving may be restricted by local laws. Please consult the local authority. Be careful when using this product when you need to devote yourself to something else.
9. Maintenance of built-in battery: The product is powered by rechargeable batteries. New batteries must be recharged and discharged two or three times before their full function is released. Disconnect from the charger when the battery is fully charged, as overcharging would shorten battery life. When not in use, the battery is fully charged and disappears slowly. Do not place the product near a heat source or expose it to direct sunlight, dust, moisture, rain, or mechanical impact. Try to keep the battery temperature between 0°C and 45°C at all times. If the battery is too hot or too cold, the product may not work temporarily, even if it is fully charged.
10. Warning on battery: Improper use of batteries may result in fire or chemical urns. Batteries can explode if damaged.
11. Please refer to the User Manual for Instructions on the charging status indicator lights.
12. When unplugging the power cord or any reinforced parts, please hold the plug and pull it out instead of pulling the cord directly. Do not use the damaged charger.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>